[U-Boot] [PATCH 1/4] spi: Add SiFive SPI driver

Anup Patel Anup.Patel at wdc.com
Fri Jun 28 08:38:24 UTC 2019


From: Bhargav Shah <bhargavshah1988 at gmail.com>

This patch adds SiFive SPI driver. The driver is 100% DM driver
and it determines input clock using clk framework.

The SiFive SPI block is found on SiFive FU540 SOC and is used to
access flash and MMC devices on SiFive Unleashed board.

This driver implementation is inspired from the Linux SiFive SPI
driver available in Linux-5.2 or higher and SiFive FSBL sources.

Signed-off-by: Bhargav Shah <bhargavshah1988 at gmail.com>
Signed-off-by: Anup Patel <anup.patel at wdc.com>
---
 drivers/spi/Kconfig      |   8 +
 drivers/spi/Makefile     |   1 +
 drivers/spi/spi-sifive.c | 405 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 414 insertions(+)
 create mode 100644 drivers/spi/spi-sifive.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index eb32f082fe..2712bad310 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -224,6 +224,14 @@ config SANDBOX_SPI
 		};
 	  };
 
+config SIFIVE_SPI
+	bool "SiFive SPI driver"
+	help
+	  This driver supports the SiFive SPI IP. If unsure say N.
+	  Enable the SiFive SPI controller driver.
+
+	  The SiFive SPI controller driver is found on various SiFive SoCs.
+
 config SPI_SUNXI
 	bool "Allwinner SoC SPI controllers"
 	help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8be9a4baa2..09a9d3697e 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_PL022_SPI) += pl022_spi.o
 obj-$(CONFIG_RENESAS_RPC_SPI) += renesas_rpc_spi.o
 obj-$(CONFIG_ROCKCHIP_SPI) += rk_spi.o
 obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o
+obj-$(CONFIG_SIFIVE_SPI) += spi-sifive.o
 obj-$(CONFIG_SPI_SUNXI) += spi-sunxi.o
 obj-$(CONFIG_SH_SPI) += sh_spi.o
 obj-$(CONFIG_SH_QSPI) += sh_qspi.o
diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
new file mode 100644
index 0000000000..70eebc0463
--- /dev/null
+++ b/drivers/spi/spi-sifive.c
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 SiFive, Inc.
+ * Copyright 2019 Bhargav Shah <bhargavshah1988 at gmail.com>
+ *
+ * SiFive SPI controller driver (master mode only)
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <linux/log2.h>
+#include <clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SIFIVE_SPI_MAX_CS		32
+
+#define SIFIVE_SPI_DEFAULT_DEPTH	8
+#define SIFIVE_SPI_DEFAULT_BITS		8
+
+/* register offsets */
+#define SIFIVE_SPI_REG_SCKDIV            0x00 /* Serial clock divisor */
+#define SIFIVE_SPI_REG_SCKMODE           0x04 /* Serial clock mode */
+#define SIFIVE_SPI_REG_CSID              0x10 /* Chip select ID */
+#define SIFIVE_SPI_REG_CSDEF             0x14 /* Chip select default */
+#define SIFIVE_SPI_REG_CSMODE            0x18 /* Chip select mode */
+#define SIFIVE_SPI_REG_DELAY0            0x28 /* Delay control 0 */
+#define SIFIVE_SPI_REG_DELAY1            0x2c /* Delay control 1 */
+#define SIFIVE_SPI_REG_FMT               0x40 /* Frame format */
+#define SIFIVE_SPI_REG_TXDATA            0x48 /* Tx FIFO data */
+#define SIFIVE_SPI_REG_RXDATA            0x4c /* Rx FIFO data */
+#define SIFIVE_SPI_REG_TXMARK            0x50 /* Tx FIFO watermark */
+#define SIFIVE_SPI_REG_RXMARK            0x54 /* Rx FIFO watermark */
+#define SIFIVE_SPI_REG_FCTRL             0x60 /* SPI flash interface control */
+#define SIFIVE_SPI_REG_FFMT              0x64 /* SPI flash instruction format */
+#define SIFIVE_SPI_REG_IE                0x70 /* Interrupt Enable Register */
+#define SIFIVE_SPI_REG_IP                0x74 /* Interrupt Pendings Register */
+
+/* sckdiv bits */
+#define SIFIVE_SPI_SCKDIV_DIV_MASK       0xfffU
+
+/* sckmode bits */
+#define SIFIVE_SPI_SCKMODE_PHA           BIT(0)
+#define SIFIVE_SPI_SCKMODE_POL           BIT(1)
+#define SIFIVE_SPI_SCKMODE_MODE_MASK     (SIFIVE_SPI_SCKMODE_PHA | \
+					  SIFIVE_SPI_SCKMODE_POL)
+
+/* csmode bits */
+#define SIFIVE_SPI_CSMODE_MODE_AUTO      0U
+#define SIFIVE_SPI_CSMODE_MODE_HOLD      2U
+#define SIFIVE_SPI_CSMODE_MODE_OFF       3U
+
+/* delay0 bits */
+#define SIFIVE_SPI_DELAY0_CSSCK(x)       ((u32)(x))
+#define SIFIVE_SPI_DELAY0_CSSCK_MASK     0xffU
+#define SIFIVE_SPI_DELAY0_SCKCS(x)       ((u32)(x) << 16)
+#define SIFIVE_SPI_DELAY0_SCKCS_MASK     (0xffU << 16)
+
+/* delay1 bits */
+#define SIFIVE_SPI_DELAY1_INTERCS(x)     ((u32)(x))
+#define SIFIVE_SPI_DELAY1_INTERCS_MASK   0xffU
+#define SIFIVE_SPI_DELAY1_INTERXFR(x)    ((u32)(x) << 16)
+#define SIFIVE_SPI_DELAY1_INTERXFR_MASK  (0xffU << 16)
+
+/* fmt bits */
+#define SIFIVE_SPI_FMT_PROTO_SINGLE      0U
+#define SIFIVE_SPI_FMT_PROTO_DUAL        1U
+#define SIFIVE_SPI_FMT_PROTO_QUAD        2U
+#define SIFIVE_SPI_FMT_PROTO_MASK        3U
+#define SIFIVE_SPI_FMT_ENDIAN            BIT(2)
+#define SIFIVE_SPI_FMT_DIR               BIT(3)
+#define SIFIVE_SPI_FMT_LEN(x)            ((u32)(x) << 16)
+#define SIFIVE_SPI_FMT_LEN_MASK          (0xfU << 16)
+
+/* txdata bits */
+#define SIFIVE_SPI_TXDATA_DATA_MASK      0xffU
+#define SIFIVE_SPI_TXDATA_FULL           BIT(31)
+
+/* rxdata bits */
+#define SIFIVE_SPI_RXDATA_DATA_MASK      0xffU
+#define SIFIVE_SPI_RXDATA_EMPTY          BIT(31)
+
+/* ie and ip bits */
+#define SIFIVE_SPI_IP_TXWM               BIT(0)
+#define SIFIVE_SPI_IP_RXWM               BIT(1)
+
+struct sifive_spi {
+	void		*regs;		/* base address of the registers */
+	u32		fifo_depth;
+	u32		bits_per_word;
+	u32		cs_inactive;	/* Level of the CS pins when inactive*/
+	u32		freq;
+	u32		num_cs;
+};
+
+static void sifive_spi_write(struct sifive_spi *spi, int offset, u32 value)
+{
+	writel(value, spi->regs + offset);
+}
+
+static u32 sifive_spi_read(struct sifive_spi *spi, int offset)
+{
+	return readl(spi->regs + offset);
+}
+
+static void sifive_spi_prep_device(struct sifive_spi *spi,
+				   struct dm_spi_slave_platdata *slave)
+{
+	/* Update the chip select polarity */
+	if (slave->mode & SPI_CS_HIGH)
+		spi->cs_inactive &= ~BIT(slave->cs);
+	else
+		spi->cs_inactive |= BIT(slave->cs);
+	sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, spi->cs_inactive);
+
+	/* Select the correct device */
+	sifive_spi_write(spi, SIFIVE_SPI_REG_CSID, slave->cs);
+}
+
+static int sifive_spi_set_cs(struct sifive_spi *spi,
+			     struct dm_spi_slave_platdata *slave)
+{
+	u32 cs_mode = SIFIVE_SPI_CSMODE_MODE_HOLD;
+
+	if (slave->cs > spi->num_cs)
+		return -EINVAL;
+
+	if (slave->mode & SPI_CS_HIGH)
+		cs_mode = SIFIVE_SPI_CSMODE_MODE_AUTO;
+
+	sifive_spi_write(spi, SIFIVE_SPI_REG_CSMODE, cs_mode);
+
+	return 0;
+}
+
+static void sifive_spi_clear_cs(struct sifive_spi *spi)
+{
+	sifive_spi_write(spi, SIFIVE_SPI_REG_CSMODE,
+			 SIFIVE_SPI_CSMODE_MODE_AUTO);
+}
+
+static void sifive_spi_prep_transfer(struct sifive_spi *spi,
+				     bool is_rx_xfer,
+				     struct dm_spi_slave_platdata *slave)
+{
+	u32 cr;
+
+	/* Modify the SPI protocol mode */
+	cr = sifive_spi_read(spi, SIFIVE_SPI_REG_FMT);
+
+	/* Bits per word ? */
+	cr &= ~SIFIVE_SPI_FMT_LEN_MASK;
+	cr |= SIFIVE_SPI_FMT_LEN(SIFIVE_SPI_DEFAULT_BITS);
+
+	/* LSB first? */
+	cr &= ~SIFIVE_SPI_FMT_ENDIAN;
+	if (slave->mode & SPI_LSB_FIRST)
+		cr |= SIFIVE_SPI_FMT_ENDIAN;
+
+	/* Number of wires ? */
+	cr &= ~SIFIVE_SPI_FMT_PROTO_MASK;
+	if ((slave->mode & SPI_TX_QUAD) || (slave->mode & SPI_RX_QUAD))
+		cr |= SIFIVE_SPI_FMT_PROTO_QUAD;
+	else if ((slave->mode & SPI_TX_DUAL) || (slave->mode & SPI_RX_DUAL))
+		cr |= SIFIVE_SPI_FMT_PROTO_DUAL;
+	else
+		cr |= SIFIVE_SPI_FMT_PROTO_SINGLE;
+
+	/* SPI direction in/out ? */
+	cr &= ~SIFIVE_SPI_FMT_DIR;
+	if (!is_rx_xfer)
+		cr |= SIFIVE_SPI_FMT_DIR;
+
+	sifive_spi_write(spi, SIFIVE_SPI_REG_FMT, cr);
+}
+
+static void sifive_spi_rx(struct sifive_spi *spi, u8 *rx_ptr)
+{
+	u32 data;
+
+	do {
+		data = sifive_spi_read(spi, SIFIVE_SPI_REG_RXDATA);
+	} while (data & SIFIVE_SPI_RXDATA_EMPTY);
+
+	if (rx_ptr)
+		*rx_ptr = data & SIFIVE_SPI_RXDATA_DATA_MASK;
+}
+
+static void sifive_spi_tx(struct sifive_spi *spi, const u8 *tx_ptr)
+{
+	u32 data;
+	u8 tx_data = (tx_ptr) ? *tx_ptr & SIFIVE_SPI_TXDATA_DATA_MASK :
+				SIFIVE_SPI_TXDATA_DATA_MASK;
+
+	do {
+		data = sifive_spi_read(spi, SIFIVE_SPI_REG_TXDATA);
+	} while (data & SIFIVE_SPI_TXDATA_FULL);
+
+	sifive_spi_write(spi, SIFIVE_SPI_REG_TXDATA, tx_data);
+}
+
+static u8 sifive_spi_txrx(struct sifive_spi *spi, const u8 *tx_ptr)
+{
+	u8 rx = 0;
+
+	sifive_spi_tx(spi, tx_ptr);
+	sifive_spi_rx(spi, &rx);
+
+	return rx;
+}
+
+static int sifive_spi_claim_bus(struct udevice *dev)
+{
+	int ret;
+	struct udevice *bus = dev->parent;
+	struct sifive_spi *spi = dev_get_priv(bus);
+	struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+
+	sifive_spi_prep_device(spi, slave);
+
+	ret = sifive_spi_set_cs(spi, slave);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int sifive_spi_release_bus(struct udevice *dev)
+{
+	struct sifive_spi *spi = dev_get_priv(dev->parent);
+
+	sifive_spi_clear_cs(spi);
+
+	return 0;
+}
+
+static int sifive_spi_xfer(struct udevice *dev, unsigned int bitlen,
+			   const void *dout, void *din, unsigned long flags)
+{
+	struct udevice *bus = dev->parent;
+	struct sifive_spi *spi = dev_get_priv(bus);
+	struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+	const unsigned char *tx_ptr = dout;
+	unsigned char *rx_ptr = din;
+	u32 remaining_len;
+
+	sifive_spi_prep_transfer(spi, true, slave);
+
+	remaining_len = bitlen / 8;
+
+	while (remaining_len) {
+		int n_words, tx_words, rx_words;
+
+		n_words = min(remaining_len, spi->fifo_depth);
+
+		/* Enqueue n_words for transmission */
+		if (tx_ptr) {
+			for (tx_words = 0; tx_words < n_words; ++tx_words) {
+				sifive_spi_txrx(spi, tx_ptr);
+				tx_ptr++;
+			}
+		}
+
+		/* Read out all the data from the RX FIFO */
+		if (rx_ptr) {
+			for (rx_words = 0; rx_words < n_words; ++rx_words) {
+				*rx_ptr = sifive_spi_txrx(spi, NULL);
+				rx_ptr++;
+			}
+		}
+
+		remaining_len -= n_words;
+	}
+
+	return 0;
+}
+
+static int sifive_spi_set_speed(struct udevice *bus, uint speed)
+{
+	struct sifive_spi *spi = dev_get_priv(bus);
+	u32 scale;
+
+	if (speed > spi->freq)
+		speed = spi->freq;
+
+	/* Cofigure max speed */
+	scale = (DIV_ROUND_UP(spi->freq >> 1, speed) - 1)
+					& SIFIVE_SPI_SCKDIV_DIV_MASK;
+	sifive_spi_write(spi, SIFIVE_SPI_REG_SCKDIV, scale);
+	return 0;
+}
+
+static int sifive_spi_set_mode(struct udevice *bus, uint mode)
+{
+	struct sifive_spi *spi = dev_get_priv(bus);
+	u32 cr;
+
+	/* Switch clock mode bits */
+	cr = sifive_spi_read(spi, SIFIVE_SPI_REG_SCKMODE) &
+					~SIFIVE_SPI_SCKMODE_MODE_MASK;
+	if (mode & SPI_CPHA)
+		cr |= SIFIVE_SPI_SCKMODE_PHA;
+	if (mode & SPI_CPOL)
+		cr |= SIFIVE_SPI_SCKMODE_POL;
+
+	sifive_spi_write(spi, SIFIVE_SPI_REG_SCKMODE, cr);
+
+	return 0;
+}
+
+static int sifive_cs_info(struct udevice *bus, uint cs,
+			  struct spi_cs_info *info)
+{
+	return 0;
+}
+
+static void sifive_spi_init_hw(struct sifive_spi *spi)
+{
+	u32 cs_bits;
+
+	/* probe the number of CS lines */
+	spi->cs_inactive = sifive_spi_read(spi, SIFIVE_SPI_REG_CSDEF);
+	sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, 0xffffffffU);
+	cs_bits = sifive_spi_read(spi, SIFIVE_SPI_REG_CSDEF);
+	sifive_spi_write(spi, SIFIVE_SPI_REG_CSDEF, spi->cs_inactive);
+	if (!cs_bits) {
+		printf("Could not auto probe CS lines\n");
+		return;
+	}
+
+	spi->num_cs = ilog2(cs_bits) + 1;
+	if (spi->num_cs > SIFIVE_SPI_MAX_CS) {
+		printf("Invalid number of spi slaves\n");
+		return;
+	}
+
+	/* Watermark interrupts are disabled by default */
+	sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
+
+	/* Set CS/SCK Delays and Inactive Time to defaults */
+	sifive_spi_write(spi, SIFIVE_SPI_REG_DELAY0,
+			 SIFIVE_SPI_DELAY0_CSSCK(1) |
+			 SIFIVE_SPI_DELAY0_SCKCS(1));
+	sifive_spi_write(spi, SIFIVE_SPI_REG_DELAY1,
+			 SIFIVE_SPI_DELAY1_INTERCS(1) |
+			 SIFIVE_SPI_DELAY1_INTERXFR(0));
+
+	/* Exit specialized memory-mapped SPI flash mode */
+	sifive_spi_write(spi, SIFIVE_SPI_REG_FCTRL, 0);
+}
+
+static int sifive_spi_probe(struct udevice *bus)
+{
+	struct sifive_spi *spi = dev_get_priv(bus);
+	struct clk clkdev;
+	int ret;
+
+	spi->regs = (void *)(ulong)dev_remap_addr(bus);
+	if (!spi->regs)
+		return -ENODEV;
+
+	spi->fifo_depth = dev_read_u32_default(bus,
+					       "sifive,fifo-depth",
+					       SIFIVE_SPI_DEFAULT_DEPTH);
+
+	spi->bits_per_word = dev_read_u32_default(bus,
+						  "sifive,max-bits-per-word",
+						  SIFIVE_SPI_DEFAULT_BITS);
+
+	ret = clk_get_by_index(bus, 0, &clkdev);
+	if (ret)
+		return ret;
+	spi->freq = clk_get_rate(&clkdev);
+
+	/* init the sifive spi hw */
+	sifive_spi_init_hw(spi);
+
+	return 0;
+}
+
+static const struct dm_spi_ops sifive_spi_ops = {
+	.claim_bus	= sifive_spi_claim_bus,
+	.release_bus	= sifive_spi_release_bus,
+	.xfer		= sifive_spi_xfer,
+	.set_speed	= sifive_spi_set_speed,
+	.set_mode	= sifive_spi_set_mode,
+	.cs_info        = sifive_cs_info,
+};
+
+static const struct udevice_id sifive_spi_ids[] = {
+	{ .compatible = "sifive,spi0" },
+	{ }
+};
+
+U_BOOT_DRIVER(sifive_spi) = {
+	.name	= "sifive_spi",
+	.id	= UCLASS_SPI,
+	.of_match = sifive_spi_ids,
+	.ops	= &sifive_spi_ops,
+	.priv_auto_alloc_size = sizeof(struct sifive_spi),
+	.probe	= sifive_spi_probe,
+};
-- 
2.17.1



More information about the U-Boot mailing list