[U-Boot] [PATCH v2 2/5] fpga: altera: cyclon2: Fix most checkpatch warnings

Alexander Dahl ada at thorsis.com
Fri Jun 28 12:41:21 UTC 2019


Nothing special, but done before further cleanup.

* spacing
* braces
* __FUNCTION__ → __func__

Suggested-by: Michal Simek <michal.simek at xilinx.com>
Signed-off-by: Alexander Dahl <ada at thorsis.com>
---
 drivers/fpga/cyclon2.c | 81 ++++++++++++++++++++++++--------------------------
 1 file changed, 39 insertions(+), 42 deletions(-)

diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c
index 6755956e85..99a64d437c 100644
--- a/drivers/fpga/cyclon2.c
+++ b/drivers/fpga/cyclon2.c
@@ -11,9 +11,9 @@
 
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
-#define PRINTF(fmt,args...)	printf (fmt ,##args)
+#define PRINTF(fmt, args...)	printf(fmt, ##args)
 #else
-#define PRINTF(fmt,args...)
+#define PRINTF(fmt, args...)
 #endif
 
 /* Note: The assumption is that we cannot possibly run fast enough to
@@ -26,7 +26,7 @@
 #endif
 
 #ifndef CONFIG_SYS_FPGA_WAIT
-#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10		/* 100 ms */
+#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ / 10		/* 100 ms */
 #endif
 
 static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize);
@@ -41,8 +41,8 @@ int CYC2_load(Altera_desc *desc, const void *buf, size_t bsize)
 
 	switch (desc->iface) {
 	case passive_serial:
-		PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
-		ret_val = CYC2_ps_load (desc, buf, bsize);
+		PRINTF("%s: Launching Passive Serial Loader\n", __func__);
+		ret_val = CYC2_ps_load(desc, buf, bsize);
 		break;
 
 	case fast_passive_parallel:
@@ -50,16 +50,16 @@ int CYC2_load(Altera_desc *desc, const void *buf, size_t bsize)
 		 * done in the write() callback. Use the existing PS load
 		 * function for FPP, too.
 		 */
-		PRINTF ("%s: Launching Fast Passive Parallel Loader\n",
-		      __FUNCTION__);
+		PRINTF("%s: Launching Fast Passive Parallel Loader\n",
+		       __func__);
 		ret_val = CYC2_ps_load(desc, buf, bsize);
 		break;
 
 		/* Add new interface types here */
 
 	default:
-		printf ("%s: Unsupported interface type, %d\n",
-				__FUNCTION__, desc->iface);
+		printf("%s: Unsupported interface type, %d\n",
+		       __func__, desc->iface);
 	}
 
 	return ret_val;
@@ -71,59 +71,58 @@ int CYC2_dump(Altera_desc *desc, const void *buf, size_t bsize)
 
 	switch (desc->iface) {
 	case passive_serial:
-		PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
-		ret_val = CYC2_ps_dump (desc, buf, bsize);
+		PRINTF("%s: Launching Passive Serial Dump\n", __func__);
+		ret_val = CYC2_ps_dump(desc, buf, bsize);
 		break;
 
 		/* Add new interface types here */
 
 	default:
-		printf ("%s: Unsupported interface type, %d\n",
-				__FUNCTION__, desc->iface);
+		printf("%s: Unsupported interface type, %d\n",
+		       __func__, desc->iface);
 	}
 
 	return ret_val;
 }
 
-int CYC2_info( Altera_desc *desc )
+int CYC2_info(Altera_desc *desc)
 {
 	return FPGA_SUCCESS;
 }
 
 /* ------------------------------------------------------------------------- */
-/* CYCLON2 Passive Serial Generic Implementation                                  */
+/* CYCLON2 Passive Serial Generic Implementation                             */
 static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;	/* assume the worst */
 	Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
 	int	ret = 0;
 
-	PRINTF ("%s: start with interface functions @ 0x%p\n",
-			__FUNCTION__, fn);
+	PRINTF("%s: start with interface functions @ 0x%p\n",
+	       __func__, fn);
 
 	if (fn) {
 		int cookie = desc->cookie;	/* make a local copy */
 		unsigned long ts;		/* timestamp */
 
-		PRINTF ("%s: Function Table:\n"
+		PRINTF("%s: Function Table:\n"
 				"ptr:\t0x%p\n"
 				"struct: 0x%p\n"
 				"config:\t0x%p\n"
 				"status:\t0x%p\n"
 				"write:\t0x%p\n"
 				"done:\t0x%p\n\n",
-				__FUNCTION__, &fn, fn, fn->config, fn->status,
+				__func__, &fn, fn, fn->config, fn->status,
 				fn->write, fn->done);
 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-		printf ("Loading FPGA Device %d...", cookie);
+		printf("Loading FPGA Device %d...", cookie);
 #endif
 
 		/*
 		 * Run the pre configuration function if there is one.
 		 */
-		if (*fn->pre) {
+		if (*fn->pre)
 			(*fn->pre) (cookie);
-		}
 
 		/* Establish the initial state */
 		(*fn->config) (false, true, cookie);	/* De-assert nCONFIG */
@@ -133,22 +132,23 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
 		udelay(2);		/* T_cfg > 2us	*/
 
 		/* Wait for nSTATUS to be asserted */
-		ts = get_timer (0);		/* get current time */
+		ts = get_timer(0);		/* get current time */
 		do {
-			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
-				puts ("** Timeout waiting for STATUS to go high.\n");
+			CONFIG_FPGA_DELAY();
+			if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) {
+				/* check the time */
+				puts("** Timeout waiting for STATUS to go high.\n");
 				(*fn->abort) (cookie);
 				return FPGA_FAIL;
 			}
 		} while (!(*fn->status) (cookie));
 
 		/* Get ready for the burn */
-		CONFIG_FPGA_DELAY ();
+		CONFIG_FPGA_DELAY();
 
 		ret = (*fn->write) (buf, bsize, true, cookie);
 		if (ret) {
-			puts ("** Write failed.\n");
+			puts("** Write failed.\n");
 			(*fn->abort) (cookie);
 			return FPGA_FAIL;
 		}
@@ -156,20 +156,20 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
 		puts(" OK? ...");
 #endif
 
-		CONFIG_FPGA_DELAY ();
+		CONFIG_FPGA_DELAY();
 
 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-		putc (' ');			/* terminate the dotted line */
+		putc(' ');			/* terminate the dotted line */
 #endif
 
 	/*
 	 * Checking FPGA's CONF_DONE signal - correctly booted ?
 	 */
 
-	if ( ! (*fn->done) (cookie) ) {
-		puts ("** Booting failed! CONF_DONE is still deasserted.\n");
+	if (!(*fn->done) (cookie)) {
+		puts("** Booting failed! CONF_DONE is still deasserted.\n");
 		(*fn->abort) (cookie);
-		return (FPGA_FAIL);
+		return FPGA_FAIL;
 	}
 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 	puts(" OK\n");
@@ -178,17 +178,15 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
 	ret_val = FPGA_SUCCESS;
 
 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-	if (ret_val == FPGA_SUCCESS) {
-		puts ("Done.\n");
-	}
-	else {
-		puts ("Fail.\n");
-	}
+	if (ret_val == FPGA_SUCCESS)
+		puts("Done.\n");
+	else
+		puts("Fail.\n");
 #endif
 	(*fn->post) (cookie);
 
 	} else {
-		printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+		printf("%s: NULL Interface function table!\n", __func__);
 	}
 
 	return ret_val;
@@ -198,7 +196,6 @@ static int CYC2_ps_dump(Altera_desc *desc, const void *buf, size_t bsize)
 {
 	/* Readback is only available through the Slave Parallel and         */
 	/* boundary-scan interfaces.                                         */
-	printf ("%s: Passive Serial Dumping is unavailable\n",
-			__FUNCTION__);
+	printf("%s: Passive Serial Dumping is unavailable\n", __func__);
 	return FPGA_FAIL;
 }
-- 
2.11.0



More information about the U-Boot mailing list