[U-Boot] [PATCH RFT v2 1/3] spi-nor: spi-nor-ids: Disable SPI_NOR_4B_OPCODES for n25q512* and n25q256*

Simon Goldschmidt simon.k.r.goldschmidt at gmail.com
Tue Oct 1 06:28:39 UTC 2019


On Tue, Oct 1, 2019 at 6:58 AM <Tudor.Ambarus at microchip.com> wrote:
>
>
>
> On 09/27/2019 07:43 AM, Vignesh Raghavendra wrote:
> > External E-Mail
> >
> >
> > Older variants of n25q256* and n25q512* do not support 4 Byte stateless
>
> nit: drop "older variants of". Looks like the latest datasheet still require
> ENTER and EXIT 4-byte address mode commands.

Hm, the datasheet I'm looking at [1] lists 4-byte opcodes. I don't know if all
required types are supported, but I would think so.

Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>

[1] https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf

Regards,
Simon

>
> > addressing opcodes. Therefore drop SPI_NOR_4B_OPCODES flag from these
> > entries.
> >
> > Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
>
> Reviewed-by: Tudor Ambarus <tudor.ambarus at microchip.com>
>
> > ---
> >  drivers/mtd/spi/spi-nor-ids.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
> > index df0643ed1d47..bb67661b40d2 100644
> > --- a/drivers/mtd/spi/spi-nor-ids.c
> > +++ b/drivers/mtd/spi/spi-nor-ids.c
> > @@ -161,12 +161,12 @@ const struct flash_info spi_nor_ids[] = {
> >       { INFO("n25q064a",    0x20bb17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
> >       { INFO("n25q128a11",  0x20bb18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
> >       { INFO("n25q128a13",  0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
> > -     { INFO("n25q256a",    0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> > -     { INFO("n25q256ax1",  0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> > +     { INFO("n25q256a",    0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> > +     { INFO("n25q256ax1",  0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
> >       { INFO6("mt25qu512a",  0x20bb20, 0x104400, 64 * 1024, 1024,
> >                SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> > -     { INFO("n25q512a",    0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> > -     { INFO("n25q512ax3",  0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> > +     { INFO("n25q512a",    0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
> > +     { INFO("n25q512ax3",  0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
> >       { INFO("n25q00",      0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
> >       { INFO("n25q00a",     0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
> >       { INFO("mt25qu02g",   0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
> >


More information about the U-Boot mailing list