[U-Boot] [PATCH 3/8] usb: gadget: Add match_ep() op to usb_gadget_ops

[Vignesh Raghavendra]

Add match_ep() op to usb_gadget_ops similar to Linux kernel which is
useful in finding a suitable ep match for the function driver. This will
avoid adding more gadget_is_xxx() handling code to usb_ep_autoconfig().

Also sync usb_ep_caps struct thats is usually used in the match_ep()
callback by the gadget controller driver

Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
---
 drivers/usb/gadget/epautoconf.c |  3 +++
 include/linux/usb/gadget.h      | 23 +++++++++++++++++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 179b94cdd0ae..e61fe5d11445 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -282,6 +282,9 @@ struct usb_ep *usb_ep_autoconfig(
 			return ep;
 	}
 
+	if (gadget->ops->match_ep)
+		ep = gadget->ops->match_ep(gadget, desc, NULL);
+
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry(ep, &gadget->ep_list, ep_list) {
 		if (ep_matches(gadget, ep, desc))
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 497798a32a87..7dba61bac131 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -129,11 +129,30 @@ struct usb_ep_ops {
 	void (*fifo_flush) (struct usb_ep *ep);
 };
 
+/**
+ * struct usb_ep_caps - endpoint capabilities description
+ * @type_control:Endpoint supports control type (reserved for ep0).
+ * @type_iso:Endpoint supports isochronous transfers.
+ * @type_bulk:Endpoint supports bulk transfers.
+ * @type_int:Endpoint supports interrupt transfers.
+ * @dir_in:Endpoint supports IN direction.
+ * @dir_out:Endpoint supports OUT direction.
+ */
+struct usb_ep_caps {
+	unsigned type_control:1;
+	unsigned type_iso:1;
+	unsigned type_bulk:1;
+	unsigned type_int:1;
+	unsigned dir_in:1;
+	unsigned dir_out:1;
+};
+
 /**
  * struct usb_ep - device side representation of USB endpoint
  * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
  * @ops: Function pointers used to access hardware-specific operations.
  * @ep_list:the gadget's ep_list holds all of its endpoints
+ * @caps:The structure describing types and directions supported by endoint.
  * @maxpacket:The maximum packet size used on this endpoint.  The initial
  *	value can sometimes be reduced (hardware allowing), according to
  *      the endpoint descriptor used to configure the endpoint.
@@ -159,6 +178,7 @@ struct usb_ep {
 	const char		*name;
 	const struct usb_ep_ops	*ops;
 	struct list_head	ep_list;
+	struct usb_ep_caps	caps;
 	unsigned		maxpacket:16;
 	unsigned		maxpacket_limit:16;
 	unsigned		max_streams:16;
@@ -447,6 +467,9 @@ struct usb_gadget_ops {
 	int	(*udc_start)(struct usb_gadget *,
 			     struct usb_gadget_driver *);
 	int	(*udc_stop)(struct usb_gadget *);
+	struct usb_ep *(*match_ep)(struct usb_gadget *,
+			struct usb_endpoint_descriptor *,
+			struct usb_ss_ep_comp_descriptor *);
 };
 
 /**
-- 
2.23.0