[U-Boot] [PATCH v2 11/13] arm64: zynqmp: probe firmware driver

[Michal Simek]

From: Ibai Erkiaga <ibai.erkiaga-elorza at xilinx.com>

Probe ZynqMP firmware driver on the board initialization phase and
ensure that firmware is in place to continue execution. The probing is
done on board_init so it can be used for both SPL and U-Boot proper.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v2: None

 arch/arm/Kconfig             |  3 +++
 board/xilinx/zynqmp/zynqmp.c | 18 ++++++------------
 2 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 257a98d795e5..e4ec703139de 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1056,9 +1056,12 @@ config ARCH_ZYNQMP
 	select DM_SPI if SPI
 	select DM_SPI_FLASH if DM_SPI
 	select DM_USB if USB
+	select FIRMWARE
 	select OF_CONTROL
 	select SPL_BOARD_INIT if SPL
 	select SPL_CLK if SPL
+	select SPL_DM_MAILBOX if SPL
+	select SPL_FIRMWARE if SPL
 	select SPL_SEPARATE_BSS if SPL
 	select SUPPORT_SPL
 	imply BOARD_LATE_INIT
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 8a66d3e50aad..b94936474d7e 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -318,18 +318,6 @@ static char *zynqmp_get_silicon_idcode_name(void)
 int board_early_init_f(void)
 {
 	int ret = 0;
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CLK_ZYNQMP)
-	u32 pm_api_version;
-
-	pm_api_version = zynqmp_firmware_version();
-	printf("PMUFW:\tv%d.%d\n",
-	       pm_api_version >> ZYNQMP_PM_VERSION_MAJOR_SHIFT,
-	       pm_api_version & ZYNQMP_PM_VERSION_MINOR_MASK);
-
-	if (pm_api_version < ZYNQMP_PM_VERSION)
-		panic("PMUFW version error. Expected: v%d.%d\n",
-		      ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR);
-#endif
 
 #if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
 	ret = psu_init();
@@ -340,6 +328,12 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
+	struct udevice *dev;
+
+	uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev);
+	if (!dev)
+		panic("PMU Firmware device not found - Enable it");
+
 #if defined(CONFIG_SPL_BUILD)
 	/* Check *at build time* if the filename is an non-empty string */
 	if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1)
-- 
2.17.1