[U-Boot] [PATCH v5 05/15] dm: Add a dsi host uclass
Yannick Fertré
yannick.fertre at st.com
Mon Oct 7 13:29:05 UTC 2019
Display Serial Interface (DSI) host can usefully be modelled
as their own uclass.
DSI defines a serial bus and a communication protocol
between the host and the device (panel, bridge).
Signed-off-by: Yannick Fertré <yannick.fertre at st.com>
---
arch/sandbox/dts/sandbox.dts | 6 ++-
configs/sandbox_defconfig | 1 +
drivers/video/Kconfig | 11 +++++
drivers/video/Makefile | 2 +
drivers/video/dsi-host-uclass.c | 39 +++++++++++++++++
drivers/video/sandbox_dsi_host.c | 90 ++++++++++++++++++++++++++++++++++++++++
include/dm/uclass-id.h | 1 +
include/dsi_host.h | 73 ++++++++++++++++++++++++++++++++
test/dm/Makefile | 1 +
test/dm/dsi_host.c | 58 ++++++++++++++++++++++++++
10 files changed, 281 insertions(+), 1 deletion(-)
create mode 100644 drivers/video/dsi-host-uclass.c
create mode 100644 drivers/video/sandbox_dsi_host.c
create mode 100644 include/dsi_host.h
create mode 100644 test/dm/dsi_host.c
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index 16a33db..f1637c8 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -25,6 +25,11 @@
compatible = "google,cros-ec-sandbox";
};
+ dsi_host: dsi_host {
+ compatible = "sandbox,dsi-host";
+ status = "okay";
+ };
+
ethrawbus {
compatible = "sandbox,eth-raw-bus";
skip-localhost = <0>;
@@ -63,7 +68,6 @@
compatible = "sandbox,spi";
cs-gpios = <0>, <&gpio_a 0>;
};
-
};
#include "sandbox.dtsi"
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index f77b9e8..3f2dc99 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -206,6 +206,7 @@ CONFIG_CONSOLE_ROTATION=y
CONFIG_CONSOLE_TRUETYPE=y
CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y
CONFIG_VIDEO_SANDBOX_SDL=y
+CONFIG_VIDEO_DSI_HOST_SANDBOX=y
CONFIG_OSD=y
CONFIG_SANDBOX_OSD=y
CONFIG_W1=y
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 36f666e..cdaf616 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -686,6 +686,17 @@ config VIDEO_DW_HDMI
rather requires a SoC-specific glue driver to call it), it
can not be enabled from the configuration menu.
+config VIDEO_DSI_HOST_SANDBOX
+ bool "Enable sandbox for dsi host"
+ depends on SANDBOX
+ select VIDEO_MIPI_DSI
+ help
+ Enable support for sandbox dsi host device used for testing
+ purposes.
+ Display Serial Interface (DSI) defines a serial bus and
+ a communication protocol between the host and the device
+ (panel, bridge).
+
config VIDEO_SIMPLE
bool "Simple display driver for preconfigured display"
help
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 7df9b0b..07aaca9 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
obj-$(CONFIG_DISPLAY) += display-uclass.o
obj-$(CONFIG_DM_VIDEO) += backlight-uclass.o
+obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o
obj-$(CONFIG_DM_VIDEO) += panel-uclass.o simple_panel.o
obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
obj-$(CONFIG_DM_VIDEO) += video_bmp.o
@@ -58,6 +59,7 @@ obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o
obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o
obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
+obj-$(CONFIG_VIDEO_DSI_HOST_SANDBOX) += sandbox_dsi_host.o
obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o
obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o
obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o
diff --git a/drivers/video/dsi-host-uclass.c b/drivers/video/dsi-host-uclass.c
new file mode 100644
index 0000000..1db1f88
--- /dev/null
+++ b/drivers/video/dsi-host-uclass.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre at st.com> for STMicroelectronics.
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dsi_host.h>
+
+int dsi_host_init(struct udevice *dev,
+ struct mipi_dsi_device *device,
+ struct display_timing *timings,
+ unsigned int max_data_lanes,
+ const struct mipi_dsi_phy_ops *phy_ops)
+{
+ struct dsi_host_ops *ops = dsi_host_get_ops(dev);
+
+ if (!ops->init)
+ return -ENOSYS;
+
+ return ops->init(dev, device, timings, max_data_lanes, phy_ops);
+}
+
+int dsi_host_enable(struct udevice *dev)
+{
+ struct dsi_host_ops *ops = dsi_host_get_ops(dev);
+
+ if (!ops->enable)
+ return -ENOSYS;
+
+ return ops->enable(dev);
+}
+
+UCLASS_DRIVER(dsi_host) = {
+ .id = UCLASS_DSI_HOST,
+ .name = "dsi_host",
+};
diff --git a/drivers/video/sandbox_dsi_host.c b/drivers/video/sandbox_dsi_host.c
new file mode 100644
index 0000000..cd644ec
--- /dev/null
+++ b/drivers/video/sandbox_dsi_host.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <display.h>
+#include <dm.h>
+#include <dsi_host.h>
+
+/**
+ * struct sandbox_dsi_host_priv - private data for driver
+ * @device: DSI peripheral device
+ * @timing: Display timings
+ * @max_data_lanes: maximum number of data lines
+ * @phy_ops: set of function pointers for performing physical operations
+ */
+struct sandbox_dsi_host_priv {
+ struct mipi_dsi_device *device;
+ struct display_timing *timings;
+ unsigned int max_data_lanes;
+ const struct mipi_dsi_phy_ops *phy_ops;
+};
+
+static int sandbox_dsi_host_init(struct udevice *dev,
+ struct mipi_dsi_device *device,
+ struct display_timing *timings,
+ unsigned int max_data_lanes,
+ const struct mipi_dsi_phy_ops *phy_ops)
+{
+ struct sandbox_dsi_host_priv *priv = dev_get_priv(dev);
+
+ if (!device)
+ return -1;
+
+ if (!timings)
+ return -2;
+
+ if (max_data_lanes == 0)
+ return -3;
+
+ if (!phy_ops)
+ return -4;
+
+ if (!phy_ops->init || !phy_ops->get_lane_mbps ||
+ !phy_ops->post_set_mode)
+ return -5;
+
+ priv->max_data_lanes = max_data_lanes;
+ priv->phy_ops = phy_ops;
+ priv->timings = timings;
+ priv->device = device;
+
+ return 0;
+}
+
+static int sandbox_dsi_host_enable(struct udevice *dev)
+{
+ struct sandbox_dsi_host_priv *priv = dev_get_priv(dev);
+ unsigned int lane_mbps;
+ int ret;
+
+ priv->phy_ops->init(priv->device);
+ ret = priv->phy_ops->get_lane_mbps(priv->device, priv->timings, 2,
+ MIPI_DSI_FMT_RGB888, &lane_mbps);
+ if (ret)
+ return -1;
+
+ priv->phy_ops->post_set_mode(priv->device, MIPI_DSI_MODE_VIDEO);
+
+ return 0;
+}
+
+struct dsi_host_ops sandbox_dsi_host_ops = {
+ .init = sandbox_dsi_host_init,
+ .enable = sandbox_dsi_host_enable,
+};
+
+static const struct udevice_id sandbox_dsi_host_ids[] = {
+ { .compatible = "sandbox,dsi-host"},
+ { }
+};
+
+U_BOOT_DRIVER(sandbox_dsi_host) = {
+ .name = "sandbox-dsi-host",
+ .id = UCLASS_DSI_HOST,
+ .of_match = sandbox_dsi_host_ids,
+ .ops = &sandbox_dsi_host_ops,
+ .priv_auto_alloc_size = sizeof(struct sandbox_dsi_host_priv),
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index d4d9610..d3e9b47 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -39,6 +39,7 @@ enum uclass_id {
UCLASS_CPU, /* CPU, typically part of an SoC */
UCLASS_CROS_EC, /* Chrome OS EC */
UCLASS_DISPLAY, /* Display (e.g. DisplayPort, HDMI) */
+ UCLASS_DSI_HOST, /* Display Serial Interface host */
UCLASS_DMA, /* Direct Memory Access */
UCLASS_EFI, /* EFI managed devices */
UCLASS_ETH, /* Ethernet device */
diff --git a/include/dsi_host.h b/include/dsi_host.h
new file mode 100644
index 0000000..9dfc7b3
--- /dev/null
+++ b/include/dsi_host.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre at st.com> for STMicroelectronics.
+ *
+ */
+
+#ifndef _DSI_HOST_H
+#define _DSI_HOST_H
+
+#include <mipi_dsi.h>
+
+struct dsi_host_ops {
+ /**
+ * init() - initialized the dsi_host
+ *
+ * @dev: dsi host device
+ * @device: DSI peripheral device
+ * @timing: Display timings
+ * @max_data_lanes: maximum number of data lines
+ * @phy_ops: set of function pointers for performing physical operations
+ * @return 0 if OK, -ve on error
+ */
+ int (*init)(struct udevice *dev,
+ struct mipi_dsi_device *device,
+ struct display_timing *timings,
+ unsigned int max_data_lanes,
+ const struct mipi_dsi_phy_ops *phy_ops);
+
+ /**
+ * enable() - Enable the dsi_host
+ *
+ * @dev: dsi host device
+ * @return 0 if OK, -ve on error
+ */
+ int (*enable)(struct udevice *dev);
+
+ /**
+ * disable() - Disable the dsi_host
+ *
+ * @dev: dsi host device
+ * @return 0 if OK, -ve on error
+ */
+ int (*disable)(struct udevice *dev);
+};
+
+#define dsi_host_get_ops(dev) ((struct dsi_host_ops *)(dev)->driver->ops)
+
+/**
+ * dsi_host_init
+ *
+ * @dev: dsi host device
+ * @device: DSI peripheral device
+ * @timing: Display timings
+ * @max_data_lanes: maximum number of data lines
+ * @phy_ops: set of function pointers for performing physical operations
+ * @return 0 if OK, -ve on error
+ */
+int dsi_host_init(struct udevice *dev,
+ struct mipi_dsi_device *device,
+ struct display_timing *timings,
+ unsigned int max_data_lanes,
+ const struct mipi_dsi_phy_ops *phy_ops);
+
+/**
+ * dsi_host_enable
+ *
+ * @dev: dsi host device
+ * @return 0 if OK, -ve on error
+ */
+int dsi_host_enable(struct udevice *dev);
+
+#endif
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 55a7940..0c2fd5c 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_BLK) += blk.o
obj-$(CONFIG_BOARD) += board.o
obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
obj-$(CONFIG_CLK) += clk.o clk_ccf.o
+obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o
obj-$(CONFIG_DM_ETH) += eth.o
obj-$(CONFIG_FIRMWARE) += firmware.o
obj-$(CONFIG_DM_GPIO) += gpio.o
diff --git a/test/dm/dsi_host.c b/test/dm/dsi_host.c
new file mode 100644
index 0000000..59fcd55
--- /dev/null
+++ b/test/dm/dsi_host.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre at st.com> for STMicroelectronics.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dsi_host.h>
+#include <asm/state.h>
+#include <asm/test.h>
+#include <dm/test.h>
+#include <test/ut.h>
+
+static int dm_test_dsi_host_phy_init(void *priv_data)
+{
+ return 0;
+}
+
+static void dm_test_dsi_host_phy_post_set_mode(void *priv_data,
+ unsigned long mode_flags)
+{
+}
+
+static int dm_test_dsi_host_phy_get_lane_mbps(void *priv_data,
+ struct display_timing *timings,
+ u32 lanes,
+ u32 format,
+ unsigned int *lane_mbps)
+{
+ return 0;
+}
+
+static const struct mipi_dsi_phy_ops dm_test_dsi_host_phy_ops = {
+ .init = dm_test_dsi_host_phy_init,
+ .get_lane_mbps = dm_test_dsi_host_phy_get_lane_mbps,
+ .post_set_mode = dm_test_dsi_host_phy_post_set_mode,
+};
+
+/* Test that dsi_host driver functions are called */
+static int dm_test_dsi_host(struct unit_test_state *uts)
+{
+ struct udevice *dev;
+ struct mipi_dsi_device device;
+ struct display_timing timings;
+ unsigned int max_data_lanes = 4;
+
+ ut_assertok(uclass_first_device_err(UCLASS_DSI_HOST, &dev));
+
+ ut_assertok(dsi_host_init(dev, &device, &timings, max_data_lanes,
+ &dm_test_dsi_host_phy_ops));
+
+ ut_assertok(dsi_host_enable(dev));
+
+ return 0;
+}
+
+DM_TEST(dm_test_dsi_host, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
--
2.7.4
More information about the U-Boot
mailing list