[U-Boot] [PATCH 063/126] x86: pci: Add a function to decode a PCI BDF

Bin Meng bmeng.cn at gmail.com
Mon Oct 7 13:53:44 UTC 2019


On Wed, Sep 25, 2019 at 10:58 PM Simon Glass <sjg at chromium.org> wrote:
>
> Early in boot it is necessary to decode the PCI device/function values for
> particular peripherals in the device tree or of-platdata. Add functions to
> handle this.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
>  arch/x86/cpu/pci.c         | 18 ++++++++++++++++++
>  arch/x86/include/asm/pci.h | 22 ++++++++++++++++++++++
>  2 files changed, 40 insertions(+)
>
> diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c
> index e1aae158ce5..f551fef5bbb 100644
> --- a/arch/x86/cpu/pci.c
> +++ b/arch/x86/cpu/pci.c
> @@ -69,6 +69,24 @@ int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set,
>         return pci_x86_write_config(bdf, offset, value, size);
>  }
>
> +#if !CONFIG_IS_ENABLED(OF_PLATDATA)
> +int pci_x86_get_devfn(struct udevice *dev)
> +{
> +       struct fdt_pci_addr addr;
> +       int ret;
> +
> +       /* Extract the devfn from fdt_pci_addr */
> +       ret = ofnode_read_pci_addr(dev_ofnode(dev), FDT_PCI_SPACE_CONFIG,
> +                                  "reg", &addr);
> +       if (ret) {
> +               if (ret != -ENOENT)
> +                       return -EINVAL;
> +       }
> +
> +       return addr.phys_hi & 0xff00;
> +}
> +#endif

This function is a duplicates of pci_get_devfn() in pci-uclass driver.

> +
>  void pci_assign_irqs(int bus, int device, u8 irq[4])
>  {
>         pci_dev_t bdf;
> diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
> index 2a720735728..abb770760f5 100644
> --- a/arch/x86/include/asm/pci.h
> +++ b/arch/x86/include/asm/pci.h
> @@ -60,6 +60,28 @@ int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value,
>  int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set,
>                           enum pci_size_t size);
>
> +/**
> + * pci_x86_get_devfn() - Extract the devfn from fdt_pci_addr of the device
> + *
> + * Get devfn from fdt_pci_addr of the specified device. This is a copy of
> + * pci_get_devfn() for use in TPL on x86, since PCI may not be available.
> + *
> + * @dev:       PCI device
> + * @return devfn in bits 15...8 if found, -ENODEV if not found
> + */
> +int pci_x86_get_devfn(struct udevice *dev);
> +
> +/**
> + * pci_x86_ofplat_get_devfn() - Get the PCI dev/fn from ofplat reg data
> + *
> + * @reg: reg value from dt-platdata.c array (first member)
> + * @return device/function for that device
> + */
> +static inline pci_dev_t pci_x86_ofplat_get_devfn(u32 reg)

Why returns pci_dev_t instead of int? This is inconsistent with the
pci_x86_get_devfn() above.

> +{
> +       return reg & 0xff00;
> +}
> +
>  /**
>   * Assign IRQ number to a PCI device
>   *
> --

Regards,
Bin


More information about the U-Boot mailing list