[U-Boot] [PATCH 3/8] ARM: socfpga: arria10: Add common u-boot devicetree include

[Simon Goldschmidt]

On Mon, Oct 7, 2019 at 3:38 PM Dalon L Westergreen
<dalon.westergreen at linux.intel.com> wrote:
>
> On Sat, 2019-10-05 at 01:49 +0200, Marek Vasut wrote:
>
> On 10/5/19 12:30 AM, Dalon Westergreen wrote:
>
> From: Dalon Westergreen <
>
> dalon.westergreen at intel.com
>
> >
>
>
> Add a common u-boot devicetree include file for the SocFPGA
>
> Arria10 device.
>
>
> Isn't arch/arm/dts/socfpga_arria10_handoff_u-boot.dtsi doing basically
>
> the same thing, except more fine-grained ?
>
>
> I wanted to keep the dts fragment dependent on the handoff header separate from the
> generic base u-boot include.

Hmm, ok, I see. Is it encouraged to add more header files in arch/arm/dts?
If so, I wouldn't be too opposed on going that way for gen5 as well...

Regards,
Simon

>
>
> diff --git a/arch/arm/dts/socfpga_arria10-common-u-boot.dtsi b/arch/arm/dts/socfpga_arria10-common-u-boot.dtsi
>
> new file mode 100644
>
> index 0000000000..bd4f1271f3
>
> --- /dev/null
>
> +++ b/arch/arm/dts/socfpga_arria10-common-u-boot.dtsi
>
> @@ -0,0 +1,206 @@
>
> +// SPDX-License-Identifier: GPL-2.0
>
> +/*
>
> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>
> + */
>
> +
>
> +/ {
>
> + #address-cells = <1>;
>
> + #size-cells = <1>;
>
> +
>
> + chosen {
>
> + tick-timer = &timer2;
>
> + u-boot,dm-pre-reloc;
>
> + };
>
> +
>
> + memory at 0 {
>
> + u-boot,dm-pre-reloc;
>
> + };
>
> +
>
> + soc {
>
> + u-boot,dm-pre-reloc;
>
> +
>
> + clkmgr at ffd04000 {
>
> + u-boot,dm-pre-reloc;
>
> +
>
> + clocks {
>
> + u-boot,dm-pre-reloc;
>
> +
>
> + cb_intosc_hs_div2_clk {
>
> + u-boot,dm-pre-reloc;
>
> + };
>
> +
>
> + cb_intosc_ls_clk {
>
> + u-boot,dm-pre-reloc;
>
> + };
>
> +
>
> + f2s_free_clk {
>
> + u-boot,dm-pre-reloc;
>
> + };
>
> +
>
> + osc1 {
>
> + u-boot,dm-pre-reloc;
>
> + };
>
> +
>
> + main_pll at 40 {
>
> + u-boot,dm-pre-reloc;
>
> +
>
> + main_mpu_base_clk {
>
> + u-boot,dm-pre-reloc;
>
> + };
>
> +
>
> + main_noc_base_clk {
>
> + u-boot,dm-pre-reloc;
>
> + };
>
> +
>
> + main_emaca_clk at 68 {
>
> + u-boot,dm-pre-reloc;
>
> + };
>
>
> Do we really need all this in SPL for every board ?