[U-Boot] [PATCH 1/2] xilinx: Add qspi boot command script for reference

[Michal Simek]

Hi,

st 11. 9. 2019 v 9:03 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
>
> Thsi patch adds qspiboot command script for reference.
> This can be converetd into uboot script using mkimage and
> use for booting.
>
> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>  create mode 100644 board/xilinx/bootscripts/qspiboot.cmd
>
> diff --git a/board/xilinx/bootscripts/qspiboot.cmd b/board/xilinx/bootscripts/qspiboot.cmd
> new file mode 100644
> index 000000000000..c10341c4d6ea
> --- /dev/null
> +++ b/board/xilinx/bootscripts/qspiboot.cmd
> @@ -0,0 +1,10 @@
> +# This is an example file to generate boot.scr - a boot script for U-Boot
> +# This example only target for qspi boot, sameway it can be created for boot
> +# devices like nand.
> +# Generate boot.scr:
> +# ./tools/mkimage -c none -A arm -T script -d qspiboot.cmd boot.scr
> +#
> +# It requires a list of environment variables to be defined before load:
> +# fdt_addr, fdt_offset, fdt_size, kernel_addr, kernel_offset, kernel_size
> +#
> +sf probe 0 0 0 && sf read $fdt_addr $fdt_offset $fdt_size && sf read $kernel_addr $kernel_offset $kernel_size && booti $kernel_addr - $fdt_addr
> --
> 2.17.1
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs