[U-Boot] [PATCH] arm64: zynqmp: Enable SPI support in SPL for zcu104

[Michal Simek]

st 11. 9. 2019 v 9:10 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> It is enabling this mode but full boot is not validated yet.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  configs/xilinx_zynqmp_zcu104_revC_defconfig | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig
> index 1c9a6d6f1ec4..2f269009dfe9 100644
> --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig
> +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig
> @@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000
>  CONFIG_SPL=y
>  CONFIG_DEBUG_UART_BASE=0xff000000
>  CONFIG_DEBUG_UART_CLOCK=100000000
> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
> +CONFIG_SPL_SPI_SUPPORT=y
>  CONFIG_ZYNQMP_USB=y
>  CONFIG_DEBUG_UART=y
>  CONFIG_AHCI=y
> @@ -16,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y
>  CONFIG_SPL_OS_BOOT=y
>  CONFIG_SPL_RAM_SUPPORT=y
>  CONFIG_SPL_RAM_DEVICE=y
> +CONFIG_SPL_SPI_LOAD=y
>  CONFIG_SPL_ATF=y
>  CONFIG_SYS_PROMPT="ZynqMP> "
>  CONFIG_CMD_MEMTEST=y
> --
> 2.17.1
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs