[U-Boot] mx6cuboxi fails to load u-boot.img

Peter Robinson pbrobinson at gmail.com
Tue Oct 8 11:44:57 UTC 2019


On Tue, Oct 8, 2019 at 12:43 PM Adam Ford <aford173 at gmail.com> wrote:
>
> On Tue, Oct 8, 2019 at 6:04 AM Stefano Babic <sbabic at denx.de> wrote:
> >
> > On 08/10/19 12:42, Adam Ford wrote:
> > > On Tue, Oct 8, 2019 at 5:19 AM Stefano Babic <sbabic at denx.de> wrote:
> > >>
> > >> Hi everybody,
> > >>
> > >> thanks for deep analyses (I just jump at the end):
> > >>
> > >> On 08/10/19 12:03, Peter Robinson wrote:
> > >>>> On Thu, Sep 26, 2019 at 05:07:21PM -0300, Fabio Estevam wrote:
> > >>>>> Hi Vagrant,
> > >>>>>
> > >>>>> On Thu, Sep 26, 2019 at 4:16 PM Vagrant Cascadian <vagrant at debian.org> wrote:
> > >>>>>>
> > >>>>>> I just tested mx6cuboxi with 2019.10-rc4, and it fails to load
> > >>>>>> u-boot.img from MMC:
> > >>>>>>
> > >>>>>> 1 2019-09-26_17:31:27.63089 U-Boot SPL 2019.10-rc4+dfsg-1 (Sep 24 2019 -
> > >>>>>> 08:03:23 +0000)
> > >>>>>> 2 2019-09-26_17:31:27.63092 Trying to boot from MMC2
> > >>>>>> 3 2019-09-26_17:31:27.63095 MMC Device 1 not found
> > >>>>>> 4 2019-09-26_17:31:27.63097 spl: could not find mmc device 1. error: -19
> > >>>>>> 5 2019-09-26_17:31:27.63099 SPL: failed to boot from all boot devices
> > >>>>>> 6 2019-09-26_17:31:27.63101 ### ERROR ### Please RESET the board ###
> > >>>>>
> > >>>>> Thanks for reporting this issue.
> > >>>>>
> > >>>>> Unfortunately, I don't have access to my Cuboxi, so I am adding Jon
> > >>>>> and Baruch on Cc.
> > >>>>
> > >>>> Works after reverting the following commit.
> > >>>
> > >>> For reference reverting this on 2019.10 fixed my issues with the udoo_neo board.
> > >>>
> > >>>> 14d319b1856b86e593e01abd0a1e3c2d63b52a8a is the first bad commit
> > >>>> commit 14d319b1856b86e593e01abd0a1e3c2d63b52a8a
> > >>>> Author: Adam Ford <aford173 at gmail.com>
> > >>>> Date:   Thu May 23 14:11:30 2019 -0500
> > >>>>
> > >>>>     spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
> > >>>>
> > >>>>     Currently, when the spl_boot_device checks the boot device, it
> > >>>>     will only return MMC1 when it's either sd or eMMC regardless
> > >>>>     of whether or not it's MMC1 or MMC2.  This is a problem when
> > >>>>     booting from MMC2 if MMC isn't being manually configured like in
> > >>>>     the DM_SPL case with SPL_OF_CONTROL.
> > >>>>
> > >>>>     This patch will check the register and return either MMC1 or MMC2.
> > >>>>
> > >>>>     Signed-off-by: Adam Ford <aford173 at gmail.com>
> > >>>>
> > >>
> > >> I tend to revert the pathc and let the "standard" case working. A board
> > >> maintainer coould add a board_boot_order() function to still overwrite
> > >> the behavior of spl_boot_device().
> > >
> > > I will revert this and the rest of the series that goes with it.
> >
> > The series is merged since a very long time - do you propose to revert
> > all of them ?
>
> I just got into my office. I'm looking into it now.  I should have
> something shortly.  for sure, I'll revert the offending patch, but I
> want to look into options on how to best approach keeping my board
> booting without adding a bunch of extra layers.
> I know time is of the essence if we want to get it into the final
> release for 2019.10

That ship sailed yesterday!

>
> adam
> >
> > commit 8f4691e31a18254d225524a4b018b8cbcddc70b1
> > Author: Adam Ford <aford173 at gmail.com>
> > Date:   Thu May 23 14:11:32 2019 -0500
> >
> >     ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init
> >
> >     Since the board uses SPL_OF_CONTROL now, we don't need to
> >     explicitly initialize the MMC driver, but we still need to
> >     pinmux the corresponding pins.  This patch removes the
> >     initialization code and leave just the muxing behind.
> >
> >     Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > commit 0749bbb5c75d2b35eaf6acd438750cf08df314ef
> > Author: Adam Ford <aford173 at gmail.com>
> > Date:   Thu May 23 14:11:31 2019 -0500
> >
> >     ARM: imx6q_logic: Enable SPL_DM with SPL_OF_CONTROL
> >
> >     With the spl code correctly returning either MMC1 or MMC2,
> >     this board can not boot either from internal eMMC (MMC1) or
> >     the uSD card on the baseboard (MMC2) using the device tree.
> >
> >     Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > commit 14d319b1856b86e593e01abd0a1e3c2d63b52a8a
> > Author: Adam Ford <aford173 at gmail.com>
> > Date:   Thu May 23 14:11:30 2019 -0500
> >
> >     spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
> >
> >     Currently, when the spl_boot_device checks the boot device, it
> >     will only return MMC1 when it's either sd or eMMC regardless
> >     of whether or not it's MMC1 or MMC2.  This is a problem when
> >     booting from MMC2 if MMC isn't being manually configured like in
> >     the DM_SPL case with SPL_OF_CONTROL.
> >
> >     This patch will check the register and return either MMC1 or MMC2.
> >
> >     Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > Two of them affects just imx6q_logic, the only one with more
> > side-effects is the one we discuss here. Of course, I can revert all
> > three of them if you prefer to go on this way (I am happy with follow up
> > pathces,too, after reverting just  14d319b1856).
> >
> > Regards,
> > Stefano
> >
> > --
> > =====================================================================
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> > =====================================================================


More information about the U-Boot mailing list