[U-Boot] [PATCH 3/3] pci: pcie_fsl: add support for "fsl, mpc8540-pci"
Heiko Schocher
hs at denx.de
Wed Oct 9 04:37:22 UTC 2019
add support for "fsl,mpc8540-pci":
- add flag "ispci" in struct fsl_pcie_data
so we can code out differences to existing devices
without breaking them
- changes if ispci is set:
- in fsl_pcie_addr_valid() check only common checks
- fsl_pcie_link_up( returns always 1
- in inbound setup, add flag PIWAR_MEM_2G
- set pcie->enabled always to 1
Signed-off-by: Heiko Schocher <hs at denx.de>
---
drivers/pci/pcie_fsl.c | 27 ++++++++++++++++++++++++++-
drivers/pci/pcie_fsl.h | 1 +
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pcie_fsl.c b/drivers/pci/pcie_fsl.c
index 05b2522dac..3c207e761e 100644
--- a/drivers/pci/pcie_fsl.c
+++ b/drivers/pci/pcie_fsl.c
@@ -23,6 +23,7 @@ static int fsl_pcie_link_up(struct fsl_pcie *pcie);
static int fsl_pcie_addr_valid(struct fsl_pcie *pcie, pci_dev_t bdf)
{
struct udevice *bus = pcie->bus;
+ struct fsl_pcie_data *info = pcie->info;
if (!pcie->enabled)
return -ENXIO;
@@ -33,6 +34,9 @@ static int fsl_pcie_addr_valid(struct fsl_pcie *pcie, pci_dev_t bdf)
if (PCI_BUS(bdf) == (bus->seq + 1) && (PCI_DEV(bdf) > 0))
return -EINVAL;
+ if (info->ispci)
+ return 0;
+
if (PCI_BUS(bdf) > bus->seq && (!fsl_pcie_link_up(pcie) || pcie->mode))
return -EINVAL;
@@ -161,9 +165,13 @@ static int fsl_pcie_hose_write_config_dword(struct fsl_pcie *pcie, uint offset,
static int fsl_pcie_link_up(struct fsl_pcie *pcie)
{
+ struct fsl_pcie_data *info = pcie->info;
ccsr_fsl_pci_t *regs = pcie->regs;
u16 ltssm;
+ if (info->ispci)
+ return 1;
+
if (pcie->block_rev >= PEX_IP_BLK_REV_3_0) {
ltssm = (in_be32(®s->pex_csr0)
& PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT;
@@ -251,6 +259,7 @@ static int fsl_pcie_setup_inbound_win(struct fsl_pcie *pcie, int idx,
bool pf, u64 phys, u64 bus_addr,
pci_size_t size)
{
+ struct fsl_pcie_data *info = pcie->info;
ccsr_fsl_pci_t *regs = pcie->regs;
pit_t *pi = ®s->pit[idx];
u32 sz = (__ilog2_u64(size) - 1);
@@ -275,6 +284,10 @@ static int fsl_pcie_setup_inbound_win(struct fsl_pcie *pcie, int idx,
flag |= PIWAR_EN | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
if (pf)
flag |= PIWAR_PF;
+
+ if (info->ispci)
+ flag |= PIWAR_MEM_2G;
+
out_be32(&pi->piwar, flag | sz);
return 0;
@@ -508,6 +521,7 @@ static int fsl_pcie_init_ep(struct fsl_pcie *pcie)
static int fsl_pcie_probe(struct udevice *dev)
{
struct fsl_pcie *pcie = dev_get_priv(dev);
+ struct fsl_pcie_data *info = pcie->info;
ccsr_fsl_pci_t *regs = pcie->regs;
u16 val_16;
@@ -515,7 +529,10 @@ static int fsl_pcie_probe(struct udevice *dev)
pcie->block_rev = in_be32(®s->block_rev1);
list_add(&pcie->list, &fsl_pcie_list);
- pcie->enabled = is_serdes_configured(PCIE1 + pcie->idx);
+ if (info->ispci)
+ pcie->enabled = 1;
+ else
+ pcie->enabled = is_serdes_configured(PCIE1 + pcie->idx);
if (!pcie->enabled) {
printf("PCIe%d: %s disabled\n", pcie->idx, dev->name);
return 0;
@@ -579,6 +596,13 @@ static const struct dm_pci_ops fsl_pcie_ops = {
.write_config = fsl_pcie_write_config,
};
+static struct fsl_pcie_data mpc85xx_data = {
+ .block_offset = 0x8000,
+ .block_offset_mask = 0xffff,
+ .stride = 0x1000,
+ .ispci = 1,
+};
+
static struct fsl_pcie_data p1_p2_data = {
.block_offset = 0xa000,
.block_offset_mask = 0xffff,
@@ -598,6 +622,7 @@ static struct fsl_pcie_data t2080_data = {
};
static const struct udevice_id fsl_pcie_ids[] = {
+ { .compatible = "fsl,mpc8540-pci", .data = (ulong)&mpc85xx_data },
{ .compatible = "fsl,pcie-mpc8548", .data = (ulong)&p1_p2_data },
{ .compatible = "fsl,pcie-p1_p2", .data = (ulong)&p1_p2_data },
{ .compatible = "fsl,pcie-p2041", .data = (ulong)&p2041_data },
diff --git a/drivers/pci/pcie_fsl.h b/drivers/pci/pcie_fsl.h
index dc8368d559..ef1b1ac8d4 100644
--- a/drivers/pci/pcie_fsl.h
+++ b/drivers/pci/pcie_fsl.h
@@ -47,6 +47,7 @@ struct fsl_pcie_data {
u32 block_offset; /* Offset from CCSR of 1st controller */
u32 block_offset_mask; /* Mask out the CCSR base */
u32 stride; /* Offset stride between controllers */
+ int ispci; /* if PCI only */
};
struct fsl_pcie {
--
2.21.0
More information about the U-Boot
mailing list