[U-Boot] [PATCH] spl: mmc: Fix indentation in spl_mmc.c file
Lukasz Majewski
lukma at denx.de
Wed Oct 9 09:04:57 UTC 2019
Dear Tom,
> From: Mans Rullgard <mans at mansr.com>
>
> This fixes a wrongly indented block of code.
>
> Signed-off-by: Mans Rullgard <mans at mansr.com>
> [lukma: Make the commit message more verbose]
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
>
Tom, are there any issues preventing this patch from being applied to
-master?
> ---
>
> common/spl/spl_mmc.c | 40 ++++++++++++++++++++--------------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
> index b3619889f7..2caceb5186 100644
> --- a/common/spl/spl_mmc.c
> +++ b/common/spl/spl_mmc.c
> @@ -334,28 +334,28 @@ int spl_mmc_load(struct spl_image_info
> *spl_image, err = -EINVAL;
> switch (boot_mode) {
> case MMCSD_MODE_EMMCBOOT:
> - /*
> - * We need to check what the partition is
> configured to.
> - * 1 and 2 match up to boot0 / boot1 and 7
> is user data
> - * which is the first physical partition (0).
> - */
> - part = (mmc->part_config >> 3) &
> PART_ACCESS_MASK; -
> - if (part == 7)
> - part = 0;
> -
> - if (CONFIG_IS_ENABLED(MMC_TINY))
> - err = mmc_switch_part(mmc, part);
> - else
> - err =
> blk_dselect_hwpart(mmc_get_blk_desc(mmc), part); -
> - if (err) {
> + /*
> + * We need to check what the partition is configured
> to.
> + * 1 and 2 match up to boot0 / boot1 and 7 is user
> data
> + * which is the first physical partition (0).
> + */
> + part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
> +
> + if (part == 7)
> + part = 0;
> +
> + if (CONFIG_IS_ENABLED(MMC_TINY))
> + err = mmc_switch_part(mmc, part);
> + else
> + err =
> blk_dselect_hwpart(mmc_get_blk_desc(mmc), part); +
> + if (err) {
> #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
> - puts("spl: mmc partition switch
> failed\n");
> + puts("spl: mmc partition switch failed\n");
> #endif
> - return err;
> - }
> - /* Fall through */
> + return err;
> + }
> + /* Fall through */
> case MMCSD_MODE_RAW:
> debug("spl: mmc boot mode: raw\n");
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191009/aa147915/attachment.sig>
More information about the U-Boot
mailing list