[U-Boot] [PATCH 5/6] configs: sam9x60ek: enable microchip_flexcom, i2c and eeprom

[Eugen.Hristev at microchip.com]

From: Eugen Hristev <eugen.hristev at microchip.com>

enable driver model for i2c, eeprom for mac retrieval from eeprom i2c memory,
and microchip_flexcom driver.

Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
---
 configs/sam9x60ek_mmc_defconfig       | 7 +++++++
 configs/sam9x60ek_nandflash_defconfig | 7 +++++++
 configs/sam9x60ek_qspiflash_defconfig | 7 +++++++
 3 files changed, 21 insertions(+)

diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig
index 0d3746a..7173501 100644
--- a/configs/sam9x60ek_mmc_defconfig
+++ b/configs/sam9x60ek_mmc_defconfig
@@ -15,10 +15,13 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -35,6 +38,10 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GENERIC_CLK=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig
index cdba103..63966b5 100644
--- a/configs/sam9x60ek_nandflash_defconfig
+++ b/configs/sam9x60ek_nandflash_defconfig
@@ -14,10 +14,13 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
@@ -37,6 +40,10 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GENERIC_CLK=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_PHY_MICREL=y
diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig
index e1b292e..eed7b77 100644
--- a/configs/sam9x60ek_qspiflash_defconfig
+++ b/configs/sam9x60ek_qspiflash_defconfig
@@ -16,10 +16,13 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
@@ -48,6 +51,10 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GENERIC_CLK=y
 CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
-- 
2.7.4