[U-Boot] [PATCH V3 27/27] imx: Add i.MX8MM EVK board support.

[Tim Harvey]

On Tue, Oct 8, 2019 at 7:50 PM Peng Fan <peng.fan at nxp.com> wrote:
>
<snip>
> > > +
> > > +Build U-Boot
> > > +============
> > > +$ export CROSS_COMPILE=aarch64-poky-linux- $ make
> > > +imx8mm_evk_defconfig $ export ATF_LOAD_ADDR=0x920000 $ make
> > flash.bin
> >
> > Build fails due to default_serial_console undefined. Did you need to enable
> > DM_SERIAL?
>
> Using imx/master I do not met build failure. I not enable DM_SERIAL.
>
> >
> > After enabling DM_SERIAL build fails during image creation:
> >
> >   MKIMAGE u-boot.itb
> > ./tools/imx8m_image.sh spl/u-boot-spl.cfgout 1
> > 26061+0 records in
> > 26061+0 records out
> > 104244 bytes (104 kB, 102 KiB) copied, 0.0458568 s, 2.3 MB/s
> >   MKIMAGE flash.bin
> > Not support no fit
> > arch/arm/mach-imx/Makefile:151: recipe for target 'flash.bin' failed
> >
> > If I hack using_fit=1 into tools/imx8mimage.c I can build flash.bin but it does
> > not boot.
> >
> > Am I missing some additional necessary patches to tools?
>
> Please try imx/master.
>

Peng,

Yes, imx/master is working. I guess there is something different there
that's still not in mainline. I'll wait for your next series and try
again.

Thanks,

Tim