[U-Boot] [PATCH] rockchip: rk3399: Add Libre Computer Board ROC-RK3399-PC

Kever Yang kever.yang at rock-chips.com
Sat Oct 12 03:40:56 UTC 2019


Jagan,

On 2019/9/19 下午2:02, Jagan Teki wrote:
> Add initial support for Libre Computer Board ROC-RK3399-PC.
>
> Specification
> - Rockchip RK3399
> - 4GB LPDDR4 dual-channel 64-bit RAM
> - SD card slot
> - eMMC socket
> - 16M Byte SPI Flash
> - Gigabit ethernet
> - PCIe 4X slot
> - WiFI/BT module socket
> - HDMI Out, DP, MIPI DSI/CSI, eDP
> - USB 2.0 Hostx3 Type-Cx2
> - USB Type C power
> - M-Key to expand SSD
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> Note: Linux need to merge this dts, so please wait so-that
> I will send v2 with sync commit.


Are you going to update v2 for this patch?


Thanks,

- Kever

>
>   arch/arm/dts/Makefile                         |   1 +
>   ...rk3399-libretech-roc-rk3399-pc-u-boot.dtsi |   7 +
>   .../dts/rk3399-libretech-roc-rk3399-pc.dts    | 680 ++++++++++++++++++
>   arch/arm/dts/rk3399-roc-pc.dts                |   2 +
>   board/rockchip/evb_rk3399/MAINTAINERS         |   6 +
>   configs/libretech-rock-rk3399-pc_defconfig    |  45 ++
>   6 files changed, 741 insertions(+)
>   create mode 100644 arch/arm/dts/rk3399-libretech-roc-rk3399-pc-u-boot.dtsi
>   create mode 100644 arch/arm/dts/rk3399-libretech-roc-rk3399-pc.dts
>   create mode 100644 configs/libretech-rock-rk3399-pc_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 62da168ef8..0aff6918dd 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -111,6 +111,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
>   	rk3399-khadas-edge.dtb \
>   	rk3399-khadas-edge-captain.dtb \
>   	rk3399-khadas-edge-v.dtb \
> +	rk3399-libretech-roc-rk3399-pc.dtb \
>   	rk3399-nanopc-t4.dtb \
>   	rk3399-nanopi-m4.dtb \
>   	rk3399-nanopi-neo4.dtb \
> diff --git a/arch/arm/dts/rk3399-libretech-roc-rk3399-pc-u-boot.dtsi b/arch/arm/dts/rk3399-libretech-roc-rk3399-pc-u-boot.dtsi
> new file mode 100644
> index 0000000000..dbfa4ba9f8
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-libretech-roc-rk3399-pc-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan at amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr4-100.dtsi"
> diff --git a/arch/arm/dts/rk3399-libretech-roc-rk3399-pc.dts b/arch/arm/dts/rk3399-libretech-roc-rk3399-pc.dts
> new file mode 100644
> index 0000000000..fecbd362a4
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-libretech-roc-rk3399-pc.dts
> @@ -0,0 +1,680 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/pwm/pwm.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> +	model = "Libre Computer Board ROC-RK3399-PC";
> +	compatible = "libretech,roc-rk3399-pc", "firefly,roc-rk3399-pc", "rockchip,rk3399";
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm0 0 25000 0>;
> +	};
> +
> +	clkin_gmac: external-gmac-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <125000000>;
> +		clock-output-names = "clkin_gmac";
> +		#clock-cells = <0>;
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		clocks = <&rk808 1>;
> +		clock-names = "ext_clock";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wifi_enable_h>;
> +
> +		/*
> +		 * On the module itself this is one of these (depending
> +		 * on the actual card populated):
> +		 * - SDIO_RESET_L_WL_REG_ON
> +		 * - PDN (power down when low)
> +		 */
> +		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	vcc_vbus_typec0: vcc-vbus-typec0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_vbus_typec0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	/*
> +	 * should be placed inside mp8859, but not until mp8859 has
> +	 * its own dt-binding.
> +	 */
> +	dc_12v: mp8859-dcdc1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "dc_12v";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +		vin-supply = <&vcc_vbus_typec0>;
> +	};
> +
> +	/* switched by pmic_sleep */
> +	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc1v8_s3";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vcc_1v8>;
> +	};
> +
> +	vcc3v3_sys: vcc3v3-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&dc_12v>;
> +	};
> +
> +	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
> +	vcc5v0_host: vcc5v0-host-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
> +		regulator-name = "vcc5v0_host";
> +		regulator-always-on;
> +		vin-supply = <&vcc_sys>;
> +	};
> +
> +	vcc_vbus_typec1: vcc-vbus-typec1 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc_vbus_typec1_en>;
> +		regulator-name = "vcc_vbus_typec1";
> +		regulator-always-on;
> +		vin-supply = <&vcc_sys>;
> +	};
> +
> +	vcc_sys: vcc-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc_12v>;
> +	};
> +
> +	vdd_log: vdd-log {
> +		compatible = "pwm-regulator";
> +		pwms = <&pwm2 0 25000 1>;
> +		regulator-name = "vdd_log";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <800000>;
> +		regulator-max-microvolt = <1400000>;
> +		vin-supply = <&vcc3v3_sys>;
> +	};
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> +	cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> +	cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> +	status = "okay";
> +};
> +
> +&gmac {
> +	assigned-clocks = <&cru SCLK_RMII_SRC>;
> +	assigned-clock-parents = <&clkin_gmac>;
> +	clock_in_out = "input";
> +	phy-supply = <&vcc_lan>;
> +	phy-mode = "rgmii";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&rgmii_pins>;
> +	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	snps,reset-delays-us = <0 10000 50000>;
> +	tx_delay = <0x28>;
> +	rx_delay = <0x11>;
> +	status = "okay";
> +};
> +
> +&hdmi {
> +	ddc-i2c-bus = <&i2c3>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&hdmi_cec>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	clock-frequency = <400000>;
> +	i2c-scl-rising-time-ns = <168>;
> +	i2c-scl-falling-time-ns = <4>;
> +	status = "okay";
> +
> +	rk808: pmic at 1b {
> +		compatible = "rockchip,rk808";
> +		reg = <0x1b>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> +		#clock-cells = <1>;
> +		clock-output-names = "xin32k", "rk808-clkout2";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_int_l>;
> +		rockchip,system-power-controller;
> +		wakeup-source;
> +
> +		vcc1-supply = <&vcc3v3_sys>;
> +		vcc2-supply = <&vcc3v3_sys>;
> +		vcc3-supply = <&vcc3v3_sys>;
> +		vcc4-supply = <&vcc3v3_sys>;
> +		vcc6-supply = <&vcc3v3_sys>;
> +		vcc7-supply = <&vcc3v3_sys>;
> +		vcc8-supply = <&vcc3v3_sys>;
> +		vcc9-supply = <&vcc3v3_sys>;
> +		vcc10-supply = <&vcc3v3_sys>;
> +		vcc11-supply = <&vcc3v3_sys>;
> +		vcc12-supply = <&vcc3v3_sys>;
> +		vddio-supply = <&vcc1v8_pmu>;
> +
> +		regulators {
> +			vdd_center: DCDC_REG1 {
> +				regulator-name = "vdd_center";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_cpu_l: DCDC_REG2 {
> +				regulator-name = "vdd_cpu_l";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_ddr: DCDC_REG3 {
> +				regulator-name = "vcc_ddr";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8: DCDC_REG4 {
> +				regulator-name = "vcc_1v8";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vcca1v8_codec: LDO_REG1 {
> +				regulator-name = "vcca1v8_codec";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc1v8_hdmi: LDO_REG2 {
> +				regulator-name = "vcc1v8_hdmi";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc1v8_pmu: LDO_REG3 {
> +				regulator-name = "vcc1v8_pmu";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vcc_sdio: LDO_REG4 {
> +				regulator-name = "vcc_sdio";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3000000>;
> +				};
> +			};
> +
> +			vcca3v0_codec: LDO_REG5 {
> +				regulator-name = "vcca3v0_codec";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v5: LDO_REG6 {
> +				regulator-name = "vcc_1v5";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1500000>;
> +				};
> +			};
> +
> +			vcca0v9_hdmi: LDO_REG7 {
> +				regulator-name = "vcca0v9_hdmi";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v0: LDO_REG8 {
> +				regulator-name = "vcc_3v0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3000000>;
> +				};
> +			};
> +
> +			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
> +				regulator-name = "vcc3v3_s3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc3v3_s0: SWITCH_REG2 {
> +				regulator-name = "vcc3v3_s0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
> +
> +	vdd_cpu_b: regulator at 40 {
> +		compatible = "silergy,syr827";
> +		reg = <0x40>;
> +		fcs,suspend-voltage-selector = <1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vsel1_gpio>;
> +		regulator-name = "vdd_cpu_b";
> +		regulator-min-microvolt = <712500>;
> +		regulator-max-microvolt = <1500000>;
> +		regulator-ramp-delay = <1000>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		vin-supply = <&vcc3v3_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	vdd_gpu: regulator at 41 {
> +		compatible = "silergy,syr828";
> +		reg = <0x41>;
> +		fcs,suspend-voltage-selector = <1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vsel2_gpio>;
> +		regulator-name = "vdd_gpu";
> +		regulator-min-microvolt = <712500>;
> +		regulator-max-microvolt = <1500000>;
> +		regulator-ramp-delay = <1000>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		vin-supply = <&vcc3v3_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	i2c-scl-rising-time-ns = <300>;
> +	i2c-scl-falling-time-ns = <15>;
> +	status = "okay";
> +};
> +
> +&i2c3 {
> +	i2c-scl-rising-time-ns = <450>;
> +	i2c-scl-falling-time-ns = <15>;
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	i2c-scl-rising-time-ns = <600>;
> +	i2c-scl-falling-time-ns = <20>;
> +	status = "okay";
> +
> +	fusb1: usb-typec at 22 {
> +		compatible = "fcs,fusb302";
> +		reg = <0x22>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&fusb1_int>;
> +		vbus-supply = <&vcc_vbus_typec1>;
> +		status = "okay";
> +	};
> +};
> +
> +&i2c7 {
> +	i2c-scl-rising-time-ns = <600>;
> +	i2c-scl-falling-time-ns = <20>;
> +	status = "okay";
> +
> +	fusb0: usb-typec at 22 {
> +		compatible = "fcs,fusb302";
> +		reg = <0x22>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&fusb0_int>;
> +		vbus-supply = <&vcc_vbus_typec0>;
> +		status = "okay";
> +	};
> +};
> +
> +&i2s0 {
> +	rockchip,playback-channels = <8>;
> +	rockchip,capture-channels = <8>;
> +	status = "okay";
> +};
> +
> +&i2s1 {
> +	rockchip,playback-channels = <2>;
> +	rockchip,capture-channels = <2>;
> +	status = "okay";
> +};
> +
> +&i2s2 {
> +	status = "okay";
> +};
> +
> +&io_domains {
> +	audio-supply = <&vcca1v8_codec>;
> +	bt656-supply = <&vcc_3v0>;
> +	gpio1830-supply = <&vcc_3v0>;
> +	sdmmc-supply = <&vcc_sdio>;
> +	status = "okay";
> +};
> +
> +&pmu_io_domains {
> +	pmu1830-supply = <&vcc_3v0>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	lcd-panel {
> +		lcd_panel_reset: lcd-panel-reset {
> +			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
> +	pmic {
> +		vsel1_gpio: vsel1-gpio {
> +			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +
> +		vsel2_gpio: vsel2-gpio {
> +			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	sdio-pwrseq {
> +		wifi_enable_h: wifi-enable-h {
> +			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pmic {
> +		pmic_int_l: pmic-int-l {
> +			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
> +	usb2 {
> +		vcc5v0_host_en: vcc5v0-host-en {
> +			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		hub_rst: hub-rst {
> +			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
> +		};
> +	};
> +
> +	usb-typec {
> +		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
> +			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	fusb30x {
> +		fusb0_int: fusb0-int {
> +			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +
> +		fusb1_int: fusb1-int {
> +			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +};
> +
> +&pwm0 {
> +	status = "okay";
> +};
> +
> +&pwm2 {
> +	status = "okay";
> +};
> +
> +&saradc {
> +	vref-supply = <&vcca1v8_s3>;
> +	status = "okay";
> +};
> +
> +&sdmmc {
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	max-frequency = <150000000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&tcphy0 {
> +	status = "okay";
> +};
> +
> +&tcphy1 {
> +	status = "okay";
> +};
> +
> +&tsadc {
> +	/* tshut mode 0:CRU 1:GPIO */
> +	rockchip,hw-tshut-mode = <1>;
> +	/* tshut polarity 0:LOW 1:HIGH */
> +	rockchip,hw-tshut-polarity = <1>;
> +	status = "okay";
> +};
> +
> +&u2phy0 {
> +	status = "okay";
> +
> +	u2phy0_otg: otg-port {
> +		phy-supply = <&vcc_vbus_typec0>;
> +		status = "okay";
> +	};
> +
> +	u2phy0_host: host-port {
> +		phy-supply = <&vcc5v0_host>;
> +		status = "okay";
> +	};
> +};
> +
> +&u2phy1 {
> +	status = "okay";
> +
> +	u2phy1_otg: otg-port {
> +		phy-supply = <&vcc_vbus_typec1>;
> +		status = "okay";
> +	};
> +
> +	u2phy1_host: host-port {
> +		phy-supply = <&vcc5v0_host>;
> +		status = "okay";
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_xfer &uart0_cts>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> +
> +&usbdrd3_0 {
> +	status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> +	status = "okay";
> +};
> +
> +&usbdrd3_1 {
> +	status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +&vopb {
> +	status = "okay";
> +};
> +
> +&vopb_mmu {
> +	status = "okay";
> +};
> +
> +&vopl {
> +	status = "okay";
> +};
> +
> +&vopl_mmu {
> +	status = "okay";
> +};
> diff --git a/arch/arm/dts/rk3399-roc-pc.dts b/arch/arm/dts/rk3399-roc-pc.dts
> index 19f7732d72..c53f3d5716 100644
> --- a/arch/arm/dts/rk3399-roc-pc.dts
> +++ b/arch/arm/dts/rk3399-roc-pc.dts
> @@ -548,6 +548,8 @@
>   };
>   
>   &pwm2 {
> +	pinctrl-names = "active";
> +	pinctrl-0 = <&pwm2_pin_pull_down>;
>   	status = "okay";
>   };
>   
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index f8299d9460..16ed0d3e3d 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -24,6 +24,12 @@ S:	Maintained
>   F:	configs/khadas-edge-v-rk3399_defconfig
>   F:	arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi
>   
> +LIBRETECH ROC-RK3399-PC
> +M:	Jagan Teki <jagan at amarulasolutions.com>
> +S:	Maintained
> +F:	configs/libretech-rock-rk3399-pc_defconfig
> +F:	arch/arm/dts/rk3399-libretech-roc-rk3399-pc-u-boot.dtsi
> +
>   NANOPC-T4
>   M:	Jagan Teki <jagan at amarulasolutions.com>
>   S:	Maintained
> diff --git a/configs/libretech-rock-rk3399-pc_defconfig b/configs/libretech-rock-rk3399-pc_defconfig
> new file mode 100644
> index 0000000000..78a1209bee
> --- /dev/null
> +++ b/configs/libretech-rock-rk3399-pc_defconfig
> @@ -0,0 +1,45 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-libretech-roc-rk3399-pc.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
> +CONFIG_TPL=y
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-libretech-roc-rk3399-pc"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM_RK3399_LPDDR4=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y




More information about the U-Boot mailing list