[U-Boot] [PATCH v3 05/15] dfu: allow to manage DFU on several devices
Patrick Delaunay
patrick.delaunay at st.com
Mon Oct 14 07:28:02 UTC 2019
Add support of DFU for several interface/device
with one command.
The format for "dfu_alt_info" in this case is :
- <interface> <dev>'='alternate list (';' separated)
- each interface is separated by '&'
The previous behavior is always supported.
One example for NOR (bootloaders) + NAND (rootfs in UBI):
U-Boot> env set dfu_alt_info \
"sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \
u-boot-env part 0 3&nand 0=UBI partubi 0,3"
U-Boot> dfu 0 list
DFU alt settings list:
dev: SF alt: 0 name: spl layout: RAW_ADDR
dev: SF alt: 1 name: ssbl layout: RAW_ADDR
dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR
dev: NAND alt: 3 name: UBI layout: RAW_ADDR
U-Boot> dfu 0
$> dfu-util -l
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
intf=0, alt=3, name="UBI", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
intf=0, alt=1, name="u-boot", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
intf=0, alt=0, name="spl", serial="002700333338511934383330"
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
Changes in v3: None
Changes in v2:
- Add dfu documentation for several device
cmd/dfu.c | 21 ++++++++++-------
doc/README.dfu | 58 ++++++++++++++++++++++++++++++++++++++++++---
drivers/dfu/dfu.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 127 insertions(+), 12 deletions(-)
diff --git a/cmd/dfu.c b/cmd/dfu.c
index 91a750a4fc..33491d0bc9 100644
--- a/cmd/dfu.c
+++ b/cmd/dfu.c
@@ -21,23 +21,28 @@
static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- if (argc < 4)
+ if (argc < 2)
return CMD_RET_USAGE;
#ifdef CONFIG_DFU_OVER_USB
char *usb_controller = argv[1];
#endif
#if defined(CONFIG_DFU_OVER_USB) || defined(CONFIG_DFU_OVER_TFTP)
- char *interface = argv[2];
- char *devstring = argv[3];
+ char *interface = NULL;
+ char *devstring = NULL;
+
+ if (argc >= 4) {
+ interface = argv[2];
+ devstring = argv[3];
+ }
#endif
int ret = 0;
#ifdef CONFIG_DFU_OVER_TFTP
unsigned long addr = 0;
if (!strcmp(argv[1], "tftp")) {
- if (argc == 5)
- addr = simple_strtoul(argv[4], NULL, 0);
+ if (argc == 5 || argc == 3)
+ addr = simple_strtoul(argv[argc - 1], NULL, 0);
return update_tftp(addr, interface, devstring);
}
@@ -48,7 +53,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
goto done;
ret = CMD_RET_SUCCESS;
- if (argc > 4 && strcmp(argv[4], "list") == 0) {
+ if (strcmp(argv[argc - 1], "list") == 0) {
dfu_show_entities();
goto done;
}
@@ -67,7 +72,7 @@ U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
"Device Firmware Upgrade",
""
#ifdef CONFIG_DFU_OVER_USB
- "<USB_controller> <interface> <dev> [list]\n"
+ "<USB_controller> [<interface> <dev>] [list]\n"
" - device firmware upgrade via <USB_controller>\n"
" on device <dev>, attached to interface\n"
" <interface>\n"
@@ -77,7 +82,7 @@ U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
#ifdef CONFIG_DFU_OVER_USB
"dfu "
#endif
- "tftp <interface> <dev> [<addr>]\n"
+ "tftp [<interface> <dev>] [<addr>]\n"
" - device firmware upgrade via TFTP\n"
" on device <dev>, attached to interface\n"
" <interface>\n"
diff --git a/doc/README.dfu b/doc/README.dfu
index 7a2b5f1d4b..d1ef7e4064 100644
--- a/doc/README.dfu
+++ b/doc/README.dfu
@@ -42,16 +42,25 @@ Environment variables:
separated string of information on each alternate:
dfu_alt_info="<alt1>;<alt2>;....;<altN>"
+ when only several device are used, the format is:
+ - <interface> <dev>'='alternate list (';' separated)
+ - each interface is separated by '&'
+ dfu_alt_info=\
+ "<interface1> <dev1>=<alt1>;....;<altN>&"\
+ "<interface2> <dev2>=<altN+1>;....;<altM>&"\
+ ...\
+ "<interfaceI> <devI>=<altY+1>;....;<altZ>&"
+
"dfu_bufsiz" : size of the DFU buffer, when absent, use
CONFIG_SYS_DFU_DATA_BUF_SIZE (8MiB by default)
"dfu_hash_algo" : name of the hash algorithm to use
Commands:
- dfu <USB_controller> <interface> <dev> list
+ dfu <USB_controller> [<interface> <dev>] list
list the alternate device defined in "dfu_alt_info"
- dfu <USB_controller> <interface> <dev>
+ dfu <USB_controller> [<interface> <dev>]
start the dfu stack on the USB instance with the selected medium
backend and use the "dfu_alt_info" variable to configure the
alternate setting and link each one with the medium
@@ -95,6 +104,18 @@ Commands:
with <partid> is the MTD partition index
+ <interface> and <dev> are absent:
+ the dfu command to use multiple devices
+ cmd: dfu 0 list
+ cmd: dfu 0
+ "dfu_alt_info" variable provides the list of <interface> <dev> with
+ alternate list separated by '&' with the same format for each <alt>
+ mmc <dev>=<alt1>;....;<altN>
+ nand <dev>=<alt1>;....;<altN>
+ ram <dev>=<alt1>;....;<altN>
+ sf <dev>=<alt1>;....;<altN>
+
+
Host tools:
When U-Boot runs the dfu stack, the DFU host tools can be used
to send/receive firmwares on each configurated alternate.
@@ -103,7 +124,7 @@ Host tools:
specifications(http://dfu-util.sourceforge.net/) which works with U-Boot.
Usage:
- Example for firmware located in eMMC or SD card, with:
+ Example 1: firmware located in eMMC or SD card, with:
- alternate 1 (alt=1) for SPL partition (GPT partition 1)
- alternate 2 (alt=2) for U-Boot partition (GPT partition 2)
@@ -147,3 +168,34 @@ Usage:
To request a DFU detach and reset the USB connection:
$> dfu-util -a 0 -e -R
+
+
+ Example 2: firmware located in NOR (sf) and NAND, with:
+ - alternate 1 (alt=1) for SPL partition (NOR GPT partition 1)
+ - alternate 2 (alt=2) for U-Boot partition (NOR GPT partition 2)
+ - alternate 3 (alt=3) for U-Boot-env partition (NOR GPT partition 3)
+ - alternate 4 (alt=4) for UBI partition (NAND GPT partition 1)
+
+ U-Boot> env set dfu_alt_info \
+ "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \
+ u-boot-env part 0 3&nand 0=UBI partubi 0,1"
+
+ U-Boot> dfu 0 list
+
+ DFU alt settings list:
+ dev: SF alt: 0 name: spl layout: RAW_ADDR
+ dev: SF alt: 1 name: ssbl layout: RAW_ADDR
+ dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR
+ dev: NAND alt: 3 name: UBI layout: RAW_ADDR
+
+ U-Boot> dfu 0
+
+ $> dfu-util -l
+ Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
+ intf=0, alt=3, name="UBI", serial="002700333338511934383330"
+ Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
+ intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330"
+ Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
+ intf=0, alt=1, name="u-boot", serial="002700333338511934383330"
+ Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
+ intf=0, alt=0, name="spl", serial="002700333338511934383330"
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 900a844d15..8bd5216017 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -53,6 +53,54 @@ static int dfu_find_alt_num(const char *s)
return ++i;
}
+/*
+ * treat dfu_alt_info with several interface information
+ * to allow DFU on several device with one command,
+ * the string format is
+ * interface devstring'='alternate list (';' separated)
+ * and each interface separated by '&'
+ */
+int dfu_config_interfaces(char *env)
+{
+ struct dfu_entity *dfu;
+ char *s, *i, *d, *a, *part;
+ int ret = -EINVAL;
+ int n = 1;
+
+ s = env;
+ for (; *s; s++) {
+ if (*s == ';')
+ n++;
+ if (*s == '&')
+ n++;
+ }
+ ret = dfu_alt_init(n, &dfu);
+ if (ret)
+ return ret;
+
+ s = env;
+ while (s) {
+ ret = -EINVAL;
+ i = strsep(&s, " ");
+ if (!i)
+ break;
+ d = strsep(&s, "=");
+ if (!d)
+ break;
+ a = strsep(&s, "&");
+ if (!a)
+ a = s;
+ do {
+ part = strsep(&a, ";");
+ ret = dfu_alt_add(dfu, i, d, part);
+ if (ret)
+ return ret;
+ } while (a);
+ }
+
+ return ret;
+}
+
int dfu_init_env_entities(char *interface, char *devstr)
{
const char *str_env;
@@ -69,7 +117,11 @@ int dfu_init_env_entities(char *interface, char *devstr)
}
env_bkp = strdup(str_env);
- ret = dfu_config_entities(env_bkp, interface, devstr);
+ if (!interface && !devstr)
+ ret = dfu_config_interfaces(env_bkp);
+ else
+ ret = dfu_config_entities(env_bkp, interface, devstr);
+
if (ret) {
pr_err("DFU entities configuration failed!\n");
pr_err("(partition table does not match dfu_alt_info?)\n");
@@ -83,6 +135,7 @@ done:
static unsigned char *dfu_buf;
static unsigned long dfu_buf_size;
+static enum dfu_device_type dfu_buf_device_type;
unsigned char *dfu_free_buf(void)
{
@@ -100,6 +153,10 @@ unsigned char *dfu_get_buf(struct dfu_entity *dfu)
{
char *s;
+ /* manage several entity with several contraint */
+ if (dfu_buf && dfu->dev_type != dfu_buf_device_type)
+ dfu_free_buf();
+
if (dfu_buf != NULL)
return dfu_buf;
@@ -118,6 +175,7 @@ unsigned char *dfu_get_buf(struct dfu_entity *dfu)
printf("%s: Could not memalign 0x%lx bytes\n",
__func__, dfu_buf_size);
+ dfu_buf_device_type = dfu->dev_type;
return dfu_buf;
}
--
2.17.1
More information about the U-Boot
mailing list