[U-Boot] [NXP-IMX] please pull imx-master-10-14
Stefano Babic
sbabic at denx.de
Mon Oct 14 10:01:03 UTC 2019
Hi Peng,
On 14/10/19 11:48, Peng Fan wrote:
> Hi Stefano,
>
> Please pull imx-master-10-14. This pull request was based on imx/master.
>
I have 40 patches already applied in my -next, anyway without MX8MN. I
will first send a PR for these, and then I will pull your - a couple of
patches in your list are already applied by me. I will check this afterward.
Regards,
Stefano
> CI is based the branch: https://travis-ci.org/MrVan/u-boot/builds/597430352
> There are build failure in arm/arm64/bcm/rockchip, but not introduced by this
> pull-request per my understanding.
>
> There are conflicts when I apply patches from patchwork, I resolved the conflicts
> and applied on imx/master.
>
> --------------------------------------------------------
> i.MX8MN SoC support
> i.MX8QM/QXP secure boot script.
> board_mmc_get_env_dev for i.MX8MM EVK.
> Enlarge MU timeout and minor update for i.MX8QM/QXP.
> --------------------------------------------------------
>
> Thanks,
> Peng.
>
> The following changes since commit 9189d6f1e9c4ae40a14558636ed7b59b53c4c885:
>
> Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 (2019-10-12 10:52:48 -0400)
>
> are available in the Git repository at:
>
> https://github.com/MrVan/u-boot.git imx-master-10-14
>
> for you to fetch changes up to 2959d05c04516e0dddfb0d14a6f2190e43ad8c41:
>
> imx8qxp: mek: add secure boot script (2019-10-14 10:12:00 +0800)
>
> ----------------------------------------------------------------
> Peng Fan (27):
> imx: imx8mm_evk: add board_mmc_get_env_dev
> imx8qm: mek: enable dm-spl for pm
> arm: dts: imx8qxp-mek: add u-boot, dm-spl for lpuart0
> arm: dts: imx8qm-mek: add u-boot, dm-spl for lpuart0
> misc: imx8: scu: simplify code to make it extendable
> power: domain: make imx8-power-domain.c legacy
> power: domain: add i.MX8 scu power domain driver
> imx: add i.MX8MN kconfig entry
> imx8mn: support get_cpu_rev
> imx8m: add clk support for i.MX8MN
> imx8mn: set BYPASS ID SWAP to avoid AXI bus errors
> imx: add i.MX8MN PE property
> imx8mn: add pin header
> imx: spl: use spl_board_boot_device for i.MX8MN
> imx: add rom api support
> imx: cpu: restrict get_boot_device
> imx8mn: add get_boot_device
> tools: imx8mimage: add ROM VERSION
> pinctrl: imx8m: support i.MX8MN
> tools: imx8m_image: support ddr4 firmware
> clk: imx: add i.MX8MN ccf driver
> imx8m: add i.MX8MN ddr4 image cfg file
> imx: add dtsi for i.MX8MN
> imx: add i.MX8MN DDR4 board support
> imx8: Add AHAB secure boot support
> imx8qm: mek: add secure boot script
> imx8qxp: mek: add secure boot script
>
> Ye Li (1):
> misc: scu: Increase the timeout for MU communication
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 13 ++
> arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 8 +
> arch/arm/dts/imx8mm-evk.dts | 6 +-
> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 92 ++++++++++
> arch/arm/dts/imx8mn-ddr4-evk.dts | 221 +++++++++++++++++++++++
> arch/arm/dts/imx8mn-pinfunc.h | 646 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/dts/imx8mn.dtsi | 712 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-imx/cpu.h | 1 +
> arch/arm/include/asm/arch-imx8m/clock.h | 2 +-
> arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 78 ++++++++
> arch/arm/include/asm/arch-imx8m/imx8mn_pins.h | 763 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/mach-imx/iomux-v3.h | 2 +-
> arch/arm/include/asm/mach-imx/sys_proto.h | 35 ++++
> arch/arm/mach-imx/Kconfig | 4 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/cpu.c | 4 +-
> arch/arm/mach-imx/imx8/Kconfig | 5 +
> arch/arm/mach-imx/imx8/ahab.c | 347 +++++++++++++++++++++++++++++++++++
> arch/arm/mach-imx/imx8/parse-container.c | 95 +++++++++-
> arch/arm/mach-imx/imx8m/Kconfig | 11 ++
> arch/arm/mach-imx/imx8m/Makefile | 2 +-
> arch/arm/mach-imx/imx8m/clock_slice.c | 4 +-
> arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg | 17 ++
> arch/arm/mach-imx/imx8m/soc.c | 54 +++++-
> arch/arm/mach-imx/spl.c | 2 +-
> arch/arm/mach-imx/spl_imx_romapi.c | 292 ++++++++++++++++++++++++++++++
> board/freescale/imx8mm_evk/imx8mm_evk.c | 5 +
> board/freescale/imx8mn_evk/Kconfig | 14 ++
> board/freescale/imx8mn_evk/MAINTAINERS | 6 +
> board/freescale/imx8mn_evk/Makefile | 12 ++
> board/freescale/imx8mn_evk/ddr4_timing.c | 1214 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/imx8mn_evk.c | 29 +++
> board/freescale/imx8mn_evk/spl.c | 123 +++++++++++++
> board/freescale/imx8qm_mek/spl.c | 16 --
> configs/imx8mn_ddr4_evk_defconfig | 78 ++++++++
> configs/imx8qm_mek_defconfig | 2 +-
> drivers/clk/imx/Kconfig | 16 ++
> drivers/clk/imx/Makefile | 2 +
> drivers/clk/imx/clk-imx8mn.c | 415 ++++++++++++++++++++++++++++++++++++++++++
> drivers/misc/imx8/scu.c | 48 +----
> drivers/pinctrl/nxp/pinctrl-imx8m.c | 1 +
> drivers/power/domain/Makefile | 2 +-
> drivers/power/domain/imx8-power-domain-legacy.c | 315 ++++++++++++++++++++++++++++++++
> drivers/power/domain/imx8-power-domain.c | 270 +++-------------------------
> include/configs/imx8mn_evk.h | 156 ++++++++++++++++
> include/configs/imx8qm_mek.h | 64 +++++--
> include/configs/imx8qxp_mek.h | 64 +++++--
> include/dt-bindings/clock/imx8mn-clock.h | 215 ++++++++++++++++++++++
> include/imximage.h | 1 +
> tools/imx8m_image.sh | 10 ++
> tools/imx8mimage.c | 24 ++-
> 52 files changed, 6168 insertions(+), 355 deletions(-)
> create mode 100644 arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx8mn-ddr4-evk.dts
> create mode 100644 arch/arm/dts/imx8mn-pinfunc.h
> create mode 100644 arch/arm/dts/imx8mn.dtsi
> create mode 100644 arch/arm/include/asm/arch-imx8m/imx8mn_pins.h
> create mode 100644 arch/arm/mach-imx/imx8/ahab.c
> create mode 100644 arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg
> create mode 100644 arch/arm/mach-imx/spl_imx_romapi.c
> create mode 100644 board/freescale/imx8mn_evk/Kconfig
> create mode 100644 board/freescale/imx8mn_evk/MAINTAINERS
> create mode 100644 board/freescale/imx8mn_evk/Makefile
> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing.c
> create mode 100644 board/freescale/imx8mn_evk/imx8mn_evk.c
> create mode 100644 board/freescale/imx8mn_evk/spl.c
> create mode 100644 configs/imx8mn_ddr4_evk_defconfig
> create mode 100644 drivers/clk/imx/clk-imx8mn.c
> create mode 100644 drivers/power/domain/imx8-power-domain-legacy.c
> create mode 100644 include/configs/imx8mn_evk.h
> create mode 100644 include/dt-bindings/clock/imx8mn-clock.h
>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list