[U-Boot] [PATCH 02/27] arm64: zynqmp: Use ethernet-phy as node name for ethernet phys

Michal Simek michal.simek at xilinx.com
Mon Oct 14 10:16:05 UTC 2019


Ethernet phys based on devicetree specification should be using
ethernet-phy@ node name instead of pure phy at .

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynqmp-g-a2197-00-revA.dts  | 2 +-
 arch/arm/dts/zynqmp-m-a2197-01-revA.dts  | 2 +-
 arch/arm/dts/zynqmp-p-a2197-00-revA.dts  | 2 +-
 arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 2 +-
 arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 2 +-
 arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 2 +-
 arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 2 +-
 arch/arm/dts/zynqmp-zcu102-revA.dts      | 2 +-
 arch/arm/dts/zynqmp-zcu102-revB.dts      | 2 +-
 arch/arm/dts/zynqmp-zcu104-revA.dts      | 2 +-
 arch/arm/dts/zynqmp-zcu104-revC.dts      | 2 +-
 arch/arm/dts/zynqmp-zcu106-revA.dts      | 2 +-
 arch/arm/dts/zynqmp-zcu111-revA.dts      | 2 +-
 13 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
index ae834bc2a692..6e5a0d2c5be6 100644
--- a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
@@ -58,7 +58,7 @@
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	is-internal-pcspma;
-	phy0: phy at 0 { /* marwell m88e1512 */
+	phy0: ethernet-phy at 0 { /* marwell m88e1512 */
 		reg = <0>;
 		reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
 /*		xlnx,phy-type = <PHY_TYPE_SGMII>; */
diff --git a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
index 65eeea1b26b6..889491456aa4 100644
--- a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
@@ -89,7 +89,7 @@
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii"; /* DTG generates this properly  1512 */
 	phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
-	phy0: phy at 0 { /* marwell m88e1512 - SGMII */
+	phy0: ethernet-phy at 0 { /* marwell m88e1512 - SGMII */
 		reg = <0>;
 /*		xlnx,phy-type = <PHY_TYPE_SGMII>; */
 	};
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
index f49da8162a01..04d5fc9f933f 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
@@ -76,7 +76,7 @@
 	phy-mode = "sgmii"; /* DTG generates this properly  1512 */
 	is-internal-pcspma;
 	/* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
-	phy0: phy at 0 {
+	phy0: ethernet-phy at 0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index 8824f5cc0272..bb6a94eefb8f 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -75,7 +75,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at 0 {
+	phy0: ethernet-phy at 0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index afa90a8a5b09..b8cc5ed22e61 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -85,7 +85,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at 5 {
+	phy0: ethernet-phy at 5 {
 		reg = <5>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
index d6a010355bb8..2ead8dd24d57 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -76,7 +76,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at 0 { /* VSC8211 */
+	phy0: ethernet-phy at 0 { /* VSC8211 */
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
index 0632b18ccf00..12c0173c5599 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -73,7 +73,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at 0 {
+	phy0: ethernet-phy at 0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 6e2287171313..e2a49a61cd15 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -110,7 +110,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at 21 {
+	phy0: ethernet-phy at 21 {
 		reg = <21>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index af4d86882a5c..08a4887401cf 100644
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -16,7 +16,7 @@
 
 &gem3 {
 	phy-handle = <&phyc>;
-	phyc: phy at c {
+	phyc: ethernet-phy at c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index c7a3cdcf61df..3e63765c6b47 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -54,7 +54,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at c {
+	phy0: ethernet-phy at c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 7df16b047ceb..8d8cabfcb280 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -55,7 +55,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at c {
+	phy0: ethernet-phy at c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 9fd3953fb44b..74d501df38ba 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -110,7 +110,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at c {
+	phy0: ethernet-phy at c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 2e28a3934fd3..d23e4ea156e5 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -106,7 +106,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy at c {
+	phy0: ethernet-phy at c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
-- 
2.17.1



More information about the U-Boot mailing list