[U-Boot] [PATCH 23/27] arm64: zynqmp: dt: Add optional gpio phy reset properties

[Michal Simek]

From: Harini Katakam <harini.katakam at xilinx.com>

Add gpio phy reset via I2C expander TCA6416 on board ZCU102.
A warning call trace is observer in probe when this reset is called
from context that can sleep. Keep this commented until that is
resolved in phylib.

Signed-off-by: Harini Katakam <harini.katakam at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynqmp-zcu102-revA.dts | 1 +
 arch/arm/dts/zynqmp-zcu102-revB.dts | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 0a6bd8542a66..3efb2b95e323 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -116,6 +116,7 @@
 		ti,tx-internal-delay = <0xa>;
 		ti,fifo-depth = <0x1>;
 		ti,dp83867-rxctrl-strap-quirk;
+		/* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
 	};
 };
 
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index 05df542c0bf7..2132024a253d 100644
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -22,6 +22,7 @@
 		ti,tx-internal-delay = <0xa>;
 		ti,fifo-depth = <0x1>;
 		ti,dp83867-rxctrl-strap-quirk;
+		/* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
 	};
 	/* Cleanup from RevA */
 	/delete-node/ phy at 21;
-- 
2.17.1