[U-Boot] [PATCH 1/2] imx8: Jump from alias to OCRAM address at SPL init

[sbabic at denx.de]

> When running SPL on iMX8, the A core starts at address 0
> which is a alias to OCRAM 0x100000.
> The alias only map first 96KB of OCRAM, so this require the
> SPL size can't beyond 96KB. But when using SPL DM, the size increase
> significantly and may exceed 96KB.
> So to fix the problem, we will change SPL linker address to OCRAM
> address 0x100000. And then jump to the absolute address not the PC relative
> address for entering OCRAM.
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================