[U-Boot] [PATCH 2/3] ARM: imx6q_logic: Enable Pin muxing in SPL

sbabic at denx.de sbabic at denx.de
Mon Oct 14 12:40:39 UTC 2019


> With the 256KB of OCRAM available to SPL now, there should be
> enough room to enable the pinmuxing in SPL from the device tree.
> This patch enables SPL_PINCTRL et al and adds the serial and
> usdhc pin mux references to the -u-boot.dtsi file so the pins can be
> configured from the device tree.
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> Reviewed-by: Peng Fan <peng.fan at nxp.com>
> diff --git a/arch/arm/dts/imx6q-logicpd-u-boot.dtsi b/arch/arm/dts/imx6q-logicpd-u-boot.dtsi
> index 625bed8f7d..ee44ed91fe 100644
> --- a/arch/arm/dts/imx6q-logicpd-u-boot.dtsi
> +++ b/arch/arm/dts/imx6q-logicpd-u-boot.dtsi
> @@ -16,3 +16,15 @@
>  &usdhc2 {
>  	u-boot,dm-spl;
>  };
> +
> +&pinctrl_uart1 {
> +	u-boot,dm-spl;
> +};
> +
> +&pinctrl_usdhc1 {
> +	u-boot,dm-spl;
> +};
> +
> +&pinctrl_usdhc2 {
> +	u-boot,dm-spl;
> +};
> diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
> index a9e8cbea94..c120cb2f54 100644
> --- a/configs/imx6q_logic_defconfig
> +++ b/configs/imx6q_logic_defconfig
> @@ -78,6 +78,7 @@ CONFIG_PHY_ATHEROS=y
>  CONFIG_FEC_MXC=y
>  CONFIG_MII=y
>  CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
>  CONFIG_PINCTRL_IMX6=y
>  CONFIG_DM_PMIC_PFUZE100=y
>  CONFIG_DM_REGULATOR=y

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================



More information about the U-Boot mailing list