[U-Boot] [PATCH 1/3] cmd: fru: Add support for FRU commands
Michal Simek
michal.simek at xilinx.com
Mon Oct 14 13:29:12 UTC 2019
From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
This patch adds support for fru commands "fru capture" and "fru display".
The fru capture parses the FRU table present at an address and stores in a
structure for later use. The fru display prints the content of captured
structured in a readable format.
As of now, it supports only common header and board area of FRU. Also, it
supports only English language code and ASCII8 format.
fru_data variable is placed to data section because fru parser can be
called very early before bss is initialized. And also information needs to
be shared that's why it is exported via header.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
MAINTAINERS | 3 +
cmd/Kconfig | 8 ++
cmd/Makefile | 1 +
cmd/fru.c | 68 +++++++++++++
common/Makefile | 1 +
common/fru_ops.c | 247 +++++++++++++++++++++++++++++++++++++++++++++++
include/fru.h | 64 ++++++++++++
7 files changed, 392 insertions(+)
create mode 100644 cmd/fru.c
create mode 100644 common/fru_ops.c
create mode 100644 include/fru.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 2ef29768555c..420ce26cd0aa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -404,6 +404,9 @@ M: Michal Simek <michal.simek at xilinx.com>
S: Maintained
T: git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git
F: arch/arm/mach-versal/
+F: cmd/fru.c
+F: common/fru_ops.c
+F: include/fru.h
N: (?<!uni)versal
ARM VERSATILE EXPRESS DRIVERS
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 07060c63a7e6..68815e42641e 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1688,6 +1688,14 @@ config CMD_UUID
The two commands are very similar except for the endianness of the
output.
+config CMD_FRU
+ bool "FRU information for product"
+ help
+ This option enables FRU commands to capture and display FRU
+ information present in the device. The FRU Information is used
+ to primarily to provide "inventory" information about the boards
+ that the FRU Information Device is located on.
+
endmenu
source "cmd/ti/Kconfig"
diff --git a/cmd/Makefile b/cmd/Makefile
index ac843b4b16ad..f790217dd628 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_DATAFLASH_MMC_SELECT) += dataflash_mmc_mux.o
obj-$(CONFIG_CMD_DATE) += date.o
obj-$(CONFIG_CMD_DEMO) += demo.o
obj-$(CONFIG_CMD_DM) += dm.o
+obj-$(CONFIG_CMD_FRU) += fru.o
obj-$(CONFIG_CMD_SOUND) += sound.o
ifdef CONFIG_POST
obj-$(CONFIG_CMD_DIAG) += diag.o
diff --git a/cmd/fru.c b/cmd/fru.c
new file mode 100644
index 000000000000..d5e96cfe8984
--- /dev/null
+++ b/cmd/fru.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2019 Xilinx, Inc.
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <fru.h>
+
+static int do_fru_capture(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ unsigned long addr;
+ char *endp;
+
+ if (argc < cmdtp->maxargs)
+ return CMD_RET_USAGE;
+
+ addr = simple_strtoul(argv[2], &endp, 16);
+ if (*argv[1] == 0 || *endp != 0)
+ return -1;
+
+ return fru_capture(addr);
+}
+
+static int do_fru_display(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ fru_display();
+ return CMD_RET_SUCCESS;
+}
+
+static cmd_tbl_t cmd_fru_sub[] = {
+ U_BOOT_CMD_MKENT(capture, 3, 0, do_fru_capture, "", ""),
+ U_BOOT_CMD_MKENT(display, 2, 0, do_fru_display, "", ""),
+};
+
+static int do_fru(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ cmd_tbl_t *c;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ c = find_cmd_tbl(argv[1], &cmd_fru_sub[0],
+ ARRAY_SIZE(cmd_fru_sub));
+ if (c)
+ return c->cmd(c, flag, argc, argv);
+
+ return CMD_RET_USAGE;
+}
+
+/***************************************************/
+#ifdef CONFIG_SYS_LONGHELP
+static char fru_help_text[] =
+ "capture <addr> - Parse and capture FRU table present at address.\n"
+ "fru display - Displays content of FRU table that was captured using\n"
+ " fru capture command\n"
+ ;
+#endif
+
+U_BOOT_CMD(
+ fru, 3, 1, do_fru,
+ "FRU table info",
+ fru_help_text
+)
diff --git a/common/Makefile b/common/Makefile
index 302d8beaf356..10cbe9a15ea1 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_UPDATE_TFTP) += update.o
obj-$(CONFIG_DFU_TFTP) += update.o
obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
obj-$(CONFIG_CMDLINE) += cli_readline.o cli_simple.o
+obj-$(CONFIG_CMD_FRU) += fru_ops.o
endif # !CONFIG_SPL_BUILD
diff --git a/common/fru_ops.c b/common/fru_ops.c
new file mode 100644
index 000000000000..dd54bd9c0214
--- /dev/null
+++ b/common/fru_ops.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2019 Xilinx, Inc.
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <fru.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+struct fru_table fru_data __attribute__((section(".data")));
+
+static u16 fru_cal_area_len(u8 len)
+{
+ return len * FRU_COMMON_HDR_LEN_MULTIPLIER;
+}
+
+static u8 fru_version(u8 ver)
+{
+ return ver & FRU_COMMON_HDR_VER_MASK;
+}
+
+static int fru_check_language(u8 code)
+{
+ if (code != FRU_LANG_CODE_ENGLISH && code != FRU_LANG_CODE_ENGLISH_1) {
+ printf("FRU_ERROR: Only English Language is supported\n");
+ return -EINVAL;
+ }
+
+ return code;
+}
+
+static u8 fru_checksum(u8 *addr, u8 len)
+{
+ u8 checksum = 0;
+
+ while (len--) {
+ checksum += *addr;
+ addr++;
+ }
+
+ return checksum;
+}
+
+static int fru_check_type_len(u8 type_len, u8 language, u8 *type)
+{
+ int len;
+
+ if (type_len == FRU_TYPELEN_EOF)
+ return -EINVAL;
+
+ *type = (type_len & FRU_TYPELEN_CODE_MASK) >> FRU_TYPELEN_TYPE_SHIFT;
+
+ len = type_len & FRU_TYPELEN_LEN_MASK;
+
+ return len;
+}
+
+static int fru_parse_board(unsigned long addr)
+{
+ u8 i, type;
+ int len;
+ u8 *data, *term;
+
+ memcpy(&fru_data.brd.ver, (void *)addr, 6);
+ addr += 6;
+ data = (u8 *)&fru_data.brd.manufacturer_type_len;
+
+ for (i = 0; ; i++, data += FRU_BOARD_MAX_LEN) {
+ *data++ = *(u8 *)addr;
+ len = fru_check_type_len(*(u8 *)addr, fru_data.brd.lang_code,
+ &type);
+ /*
+ * Stop cature if it end of fields
+ */
+ if (len == -EINVAL)
+ break;
+
+ /*
+ * Dont capture data if type is not ASCII8
+ */
+ if (type != FRU_TYPELEN_TYPE_ASCII8)
+ return 0;
+
+ addr += 1;
+ if (!len)
+ continue;
+ memcpy(data, (u8 *)addr, len);
+ term = data + (u8)len;
+ *term = 0;
+ addr += len;
+ }
+
+ if (i < FRU_BOARD_AREA_TOTAL_FIELDS) {
+ printf("Board area require minimum %d fields\n",
+ FRU_BOARD_AREA_TOTAL_FIELDS);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int fru_capture(unsigned long addr)
+{
+ struct fru_common_hdr *hdr;
+ u8 checksum = 0;
+
+ checksum = fru_checksum((u8 *)addr, sizeof(struct fru_common_hdr));
+ if (checksum) {
+ printf("%s Common header CRC error\n", __func__);
+ return -EINVAL;
+ }
+
+ hdr = (struct fru_common_hdr *)addr;
+
+ memcpy((void *)&fru_data.hdr, (void *)hdr,
+ sizeof(struct fru_common_hdr));
+
+ fru_data.captured = true;
+
+ if (hdr->off_board) {
+ addr += fru_cal_area_len(hdr->off_board);
+ fru_parse_board(addr);
+ }
+
+ env_set_hex("fru_addr", addr);
+
+ return 0;
+}
+
+static int fru_display_board(void)
+{
+ u32 time = 0;
+ u8 type;
+ int len;
+ u8 *data;
+ const char *typecode[] = {
+ "Binary/Unspecified",
+ "BCD plus",
+ "6-bit ASCII",
+ "8-bit ASCII",
+ "2-byte UNICODE"
+ };
+ const char *boardinfo[] = {
+ "Manufacturer Name",
+ "Product Name",
+ "Serial No",
+ "Part Number",
+ "File ID"
+ };
+
+ printf("*****BOARD INFO*****\n");
+ printf("Version:%d\n", fru_version(fru_data.brd.ver));
+ printf("Board Area Length:%d\n", fru_cal_area_len(fru_data.brd.len));
+
+ if (fru_check_language(fru_data.brd.lang_code))
+ return 0;
+
+ time = fru_data.brd.time[2] << 16 | fru_data.brd.time[1] << 8 |
+ fru_data.brd.time[0];
+ printf("Time in Minutes from 0:00hrs 1/1/96 %d\n", time);
+
+ data = (u8 *)&fru_data.brd.manufacturer_type_len;
+
+ for (u8 i = 0; ; i++) {
+ len = fru_check_type_len(*data++, fru_data.brd.lang_code,
+ &type);
+ if (len == -EINVAL) {
+ printf("**** EOF for Board Area ****\n");
+ break;
+ }
+
+ if (type <= FRU_TYPELEN_TYPE_ASCII8 &&
+ (fru_data.brd.lang_code == FRU_LANG_CODE_ENGLISH ||
+ fru_data.brd.lang_code == FRU_LANG_CODE_ENGLISH_1))
+ printf("Type code: %s\n", typecode[type]);
+ else
+ printf("Type code: %s\n", typecode[type + 1]);
+
+ if (type != FRU_TYPELEN_TYPE_ASCII8) {
+ printf("FRU_ERROR: Only ASCII8 type is supported\n");
+ return 0;
+ }
+ if (!len) {
+ printf("%s not found\n", boardinfo[i]);
+ continue;
+ }
+
+ printf("Length: %d\n", len);
+ printf("%s: %s\n", boardinfo[i], data);
+ data += FRU_BOARD_MAX_LEN;
+ }
+
+ return 0;
+}
+
+static void fru_display_common_hdr(void)
+{
+ struct fru_common_hdr *hdr = &fru_data.hdr;
+
+ printf("*****COMMON HEADER*****\n");
+ printf("Version:%d\n", fru_version(hdr->version));
+ if (hdr->off_internal)
+ printf("Internal Use Area Offset:%d\n",
+ fru_cal_area_len(hdr->off_internal));
+ else
+ printf("*** No Internal Area ***\n");
+
+ if (hdr->off_chassis)
+ printf("Chassis Info Area Offset:%d\n",
+ fru_cal_area_len(hdr->off_chassis));
+ else
+ printf("*** No Chassis Info Area ***\n");
+
+ if (hdr->off_board)
+ printf("Board Area Offset:%d\n",
+ fru_cal_area_len(hdr->off_board));
+ else
+ printf("*** No Board Area ***\n");
+
+ if (hdr->off_product)
+ printf("Product Info Area Offset:%d\n",
+ fru_cal_area_len(hdr->off_product));
+ else
+ printf("*** No Product Info Area ***\n");
+
+ if (hdr->off_multirec)
+ printf("MultiRecord Area Offset:%d\n",
+ fru_cal_area_len(hdr->off_multirec));
+ else
+ printf("*** No MultiRecord Area ***\n");
+}
+
+int fru_display(void)
+{
+ if (!fru_data.captured) {
+ printf("FRU data not available please run fru parse\n");
+ return -EINVAL;
+ }
+
+ fru_display_common_hdr();
+ fru_display_board();
+
+ return 0;
+}
diff --git a/include/fru.h b/include/fru.h
new file mode 100644
index 000000000000..38fdfad409c4
--- /dev/null
+++ b/include/fru.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Xilinx, Inc.
+ * Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
+ */
+
+#ifndef __FRU_H
+#define __FRU_H
+
+struct fru_common_hdr {
+ u8 version;
+ u8 off_internal;
+ u8 off_chassis;
+ u8 off_board;
+ u8 off_product;
+ u8 off_multirec;
+ u8 pad;
+ u8 crc;
+};
+
+#define FRU_BOARD_MAX_LEN 32
+
+struct fru_board_data {
+ u8 ver;
+ u8 len;
+ u8 lang_code;
+ u8 time[3];
+ u8 manufacturer_type_len;
+ u8 manufacturer_name[FRU_BOARD_MAX_LEN];
+ u8 product_name_type_len;
+ u8 product_name[FRU_BOARD_MAX_LEN];
+ u8 serial_number_type_len;
+ u8 serial_number[FRU_BOARD_MAX_LEN];
+ u8 part_number_type_len;
+ u8 part_number[FRU_BOARD_MAX_LEN];
+ u8 file_id_type_len;
+ u8 file_id[FRU_BOARD_MAX_LEN];
+};
+
+struct fru_table {
+ bool captured;
+ struct fru_common_hdr hdr;
+ struct fru_board_data brd;
+};
+
+#define FRU_TYPELEN_CODE_MASK 0xC0
+#define FRU_TYPELEN_LEN_MASK 0x3F
+#define FRU_COMMON_HDR_VER_MASK 0xF
+#define FRU_COMMON_HDR_LEN_MULTIPLIER 8
+#define FRU_LANG_CODE_ENGLISH 0
+#define FRU_LANG_CODE_ENGLISH_1 25
+#define FRU_TYPELEN_EOF 0xC1
+
+/* This should be minimum of fields */
+#define FRU_BOARD_AREA_TOTAL_FIELDS 5
+#define FRU_TYPELEN_TYPE_SHIFT 6
+#define FRU_TYPELEN_TYPE_ASCII8 3
+
+int fru_display(void);
+int fru_capture(unsigned long addr);
+
+extern struct fru_table fru_data;
+
+#endif /* FRU_H */
--
2.17.1
More information about the U-Boot
mailing list