[U-Boot] [PATCH] imx: require CCM driver only on i.MX8MM
Peng Fan
peng.fan at nxp.com
Tue Oct 15 06:16:15 UTC 2019
> Subject: [PATCH] imx: require CCM driver only on i.MX8MM
>
> Since there is no clock driver like that for i.MX8MQ, we cannot require it on
> that platform, so make sure it is only built for i.MX8MM. This makes
> i.MX8MQ platforms work again.
I would add this:
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index c46031dd12..3e73ca3cca 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -236,12 +236,14 @@ int arch_cpu_init_dm(void)
struct udevice *dev;
int ret;
- ret = uclass_get_device_by_name(UCLASS_CLK,
- "clock-controller at 30380000",
- &dev);
- if (ret < 0) {
- printf("Failed to find clock node. Check device tree\n");
- return ret;
+ if (CONFIG_IS_ENABLED(CLK)) {
+ ret = uclass_get_device_by_name(UCLASS_CLK,
+ "clock-controller at 30380000",
+ &dev);
+ if (ret < 0) {
+ printf("Failed to find clock node. Check device tree\n");
+ return ret;
+ }
}
return 0;
Thanks,
Peng.
>
> Signed-off-by: Patrick Wildt <patrick at blueri.se>
> ---
> arch/arm/mach-imx/imx8m/soc.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/mach-imx/imx8m/soc.c
> b/arch/arm/mach-imx/imx8m/soc.c index aeca82cdbf..11ca8c86b3 100644
> --- a/arch/arm/mach-imx/imx8m/soc.c
> +++ b/arch/arm/mach-imx/imx8m/soc.c
> @@ -229,6 +229,7 @@ static void imx_set_wdog_powerdown(bool enable)
> writew(enable, &wdog3->wmcr);
> }
>
> +#ifdef CONFIG_ARCH_IMX8MM
> int arch_cpu_init_dm(void)
> {
> struct udevice *dev;
> @@ -244,6 +245,7 @@ int arch_cpu_init_dm(void)
>
> return 0;
> }
> +#endif
>
> int arch_cpu_init(void)
> {
> --
> 2.23.0
More information about the U-Boot
mailing list