[U-Boot] [PATCH v2 05/11] ufs: Add Initial Support for UFS subsystem
Faiz Abbas
faiz_abbas at ti.com
Tue Oct 15 12:54:36 UTC 2019
Add Support for UFS Host Controller Interface (UFSHCI) for communicating
with Universal Flash Storage (UFS) devices. The steps to initialize the
host controller interface are the following:
- Initiate the Host Controller Initialization process by writing to the
Host controller enable register.
- Configure the Host Controller base address registers by allocating a
host memory space and related data structures.
- Unipro link startup procedure
- Check for connected device
- Configure UFS host controller to process requests
Also register this host controller as a SCSI host controller.
Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to
U-boot.
Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
---
MAINTAINERS | 5 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/ufs/Kconfig | 9 +
drivers/ufs/Makefile | 6 +
drivers/ufs/ufs-uclass.c | 16 +
drivers/ufs/ufs.c | 1968 ++++++++++++++++++++++++++++++++++++++
drivers/ufs/ufs.h | 918 ++++++++++++++++++
drivers/ufs/unipro.h | 270 ++++++
include/dm/uclass-id.h | 1 +
include/ufs.h | 29 +
11 files changed, 3225 insertions(+)
create mode 100644 drivers/ufs/Kconfig
create mode 100644 drivers/ufs/Makefile
create mode 100644 drivers/ufs/ufs-uclass.c
create mode 100644 drivers/ufs/ufs.c
create mode 100644 drivers/ufs/ufs.h
create mode 100644 drivers/ufs/unipro.h
create mode 100644 include/ufs.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 2ef2976855..2d32c49d79 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -839,6 +839,11 @@ S: Maintained
T: git https://gitlab.denx.de/u-boot/custodians/u-boot-ubi.git
F: drivers/mtd/ubi/
+UFS
+M: Faiz Abbas <faiz_abbas at ti.com>
+S: Maintained
+F: drivers/ufs/
+
USB
M: Marek Vasut <marex at denx.de>
S: Maintained
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 350acf81f3..9d99ce0226 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -118,6 +118,8 @@ source "drivers/tpm/Kconfig"
source "drivers/usb/Kconfig"
+source "drivers/ufs/Kconfig"
+
source "drivers/video/Kconfig"
source "drivers/virtio/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index a4bb5e4975..0befeddfcb 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -111,6 +111,7 @@ obj-y += soc/
obj-y += thermal/
obj-$(CONFIG_TEE) += tee/
obj-y += axi/
+obj-y += ufs/
obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig
new file mode 100644
index 0000000000..b0981062d8
--- /dev/null
+++ b/drivers/ufs/Kconfig
@@ -0,0 +1,9 @@
+menu "UFS Host Controller Support"
+
+config UFS
+ bool "Support UFS controllers"
+ depends on DM_SCSI
+ help
+ This selects support for Universal Flash Subsystem (UFS).
+ Say Y here if you want UFS Support.
+endmenu
diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile
new file mode 100644
index 0000000000..b8df759f66
--- /dev/null
+++ b/drivers/ufs/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+#
+
+obj-$(CONFIG_UFS) += ufs.o ufs-uclass.o
diff --git a/drivers/ufs/ufs-uclass.c b/drivers/ufs/ufs-uclass.c
new file mode 100644
index 0000000000..920bfa64e1
--- /dev/null
+++ b/drivers/ufs/ufs-uclass.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * ufs-uclass.c - Universal Flash Subsystem (UFS) Uclass driver
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#include <common.h>
+#include "ufs.h"
+#include <dm.h>
+
+UCLASS_DRIVER(ufs) = {
+ .id = UCLASS_UFS,
+ .name = "ufs",
+ .per_device_auto_alloc_size = sizeof(struct ufs_hba),
+};
diff --git a/drivers/ufs/ufs.c b/drivers/ufs/ufs.c
new file mode 100644
index 0000000000..23306863d5
--- /dev/null
+++ b/drivers/ufs/ufs.c
@@ -0,0 +1,1968 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ * ufs.c - Universal Flash Subsystem (UFS) driver
+ *
+ * Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported
+ * to u-boot.
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#include <charset.h>
+#include <common.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <dm/device-internal.h>
+#include <malloc.h>
+#include <hexdump.h>
+#include <scsi.h>
+
+#include <asm/dma-mapping.h>
+
+#include "ufs.h"
+
+#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\
+ UTP_TASK_REQ_COMPL |\
+ UFSHCD_ERROR_MASK)
+/* maximum number of link-startup retries */
+#define DME_LINKSTARTUP_RETRIES 3
+
+/* maximum number of retries for a general UIC command */
+#define UFS_UIC_COMMAND_RETRIES 3
+
+/* Query request retries */
+#define QUERY_REQ_RETRIES 3
+/* Query request timeout */
+#define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */
+
+/* maximum timeout in ms for a general UIC command */
+#define UFS_UIC_CMD_TIMEOUT 1000
+/* NOP OUT retries waiting for NOP IN response */
+#define NOP_OUT_RETRIES 10
+/* Timeout after 30 msecs if NOP OUT hangs without response */
+#define NOP_OUT_TIMEOUT 30 /* msecs */
+
+/* Only use one Task Tag for all requests */
+#define TASK_TAG 0
+
+/* Expose the flag value from utp_upiu_query.value */
+#define MASK_QUERY_UPIU_FLAG_LOC 0xFF
+
+#define MAX_PRDT_ENTRY 262144
+
+/* maximum bytes per request */
+#define UFS_MAX_BYTES (128 * 256 * 1024)
+
+static inline bool ufshcd_is_hba_active(struct ufs_hba *hba);
+static inline void ufshcd_hba_stop(struct ufs_hba *hba);
+static int ufshcd_hba_enable(struct ufs_hba *hba);
+
+/*
+ * ufshcd_wait_for_register - wait for register value to change
+ */
+static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
+ u32 val, unsigned long timeout_ms)
+{
+ int err = 0;
+ unsigned long start = get_timer(0);
+
+ /* ignore bits that we don't intend to wait on */
+ val = val & mask;
+
+ while ((ufshcd_readl(hba, reg) & mask) != val) {
+ if (get_timer(start) > timeout_ms) {
+ if ((ufshcd_readl(hba, reg) & mask) != val)
+ err = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * ufshcd_init_pwr_info - setting the POR (power on reset)
+ * values in hba power info
+ */
+static void ufshcd_init_pwr_info(struct ufs_hba *hba)
+{
+ hba->pwr_info.gear_rx = UFS_PWM_G1;
+ hba->pwr_info.gear_tx = UFS_PWM_G1;
+ hba->pwr_info.lane_rx = 1;
+ hba->pwr_info.lane_tx = 1;
+ hba->pwr_info.pwr_rx = SLOWAUTO_MODE;
+ hba->pwr_info.pwr_tx = SLOWAUTO_MODE;
+ hba->pwr_info.hs_rate = 0;
+}
+
+/**
+ * ufshcd_print_pwr_info - print power params as saved in hba
+ * power info
+ */
+static void ufshcd_print_pwr_info(struct ufs_hba *hba)
+{
+ static const char * const names[] = {
+ "INVALID MODE",
+ "FAST MODE",
+ "SLOW_MODE",
+ "INVALID MODE",
+ "FASTAUTO_MODE",
+ "SLOWAUTO_MODE",
+ "INVALID MODE",
+ };
+
+ dev_err(hba->dev, "[RX, TX]: gear=[%d, %d], lane[%d, %d], pwr[%s, %s], rate = %d\n",
+ hba->pwr_info.gear_rx, hba->pwr_info.gear_tx,
+ hba->pwr_info.lane_rx, hba->pwr_info.lane_tx,
+ names[hba->pwr_info.pwr_rx],
+ names[hba->pwr_info.pwr_tx],
+ hba->pwr_info.hs_rate);
+}
+
+/**
+ * ufshcd_ready_for_uic_cmd - Check if controller is ready
+ * to accept UIC commands
+ */
+static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba)
+{
+ if (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY)
+ return true;
+ else
+ return false;
+}
+
+/**
+ * ufshcd_get_uic_cmd_result - Get the UIC command result
+ */
+static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba)
+{
+ return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2) &
+ MASK_UIC_COMMAND_RESULT;
+}
+
+/**
+ * ufshcd_get_dme_attr_val - Get the value of attribute returned by UIC command
+ */
+static inline u32 ufshcd_get_dme_attr_val(struct ufs_hba *hba)
+{
+ return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3);
+}
+
+/**
+ * ufshcd_is_device_present - Check if any device connected to
+ * the host controller
+ */
+static inline bool ufshcd_is_device_present(struct ufs_hba *hba)
+{
+ return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) &
+ DEVICE_PRESENT) ? true : false;
+}
+
+/**
+ * ufshcd_send_uic_cmd - UFS Interconnect layer command API
+ *
+ */
+static int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
+{
+ unsigned long start = 0;
+ u32 intr_status;
+ u32 enabled_intr_status;
+
+ if (!ufshcd_ready_for_uic_cmd(hba)) {
+ dev_err(hba->dev,
+ "Controller not ready to accept UIC commands\n");
+ return -EIO;
+ }
+
+ debug("sending uic command:%d\n", uic_cmd->command);
+
+ /* Write Args */
+ ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1);
+ ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2);
+ ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3);
+
+ /* Write UIC Cmd */
+ ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK,
+ REG_UIC_COMMAND);
+
+ start = get_timer(0);
+ do {
+ intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
+ enabled_intr_status = intr_status & hba->intr_mask;
+ ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS);
+
+ if (get_timer(start) > UFS_UIC_CMD_TIMEOUT) {
+ dev_err(hba->dev,
+ "Timedout waiting for UIC response\n");
+
+ return -ETIMEDOUT;
+ }
+
+ if (enabled_intr_status & UFSHCD_ERROR_MASK) {
+ dev_err(hba->dev, "Error in status:%08x\n",
+ enabled_intr_status);
+
+ return -1;
+ }
+ } while (!(enabled_intr_status & UFSHCD_UIC_MASK));
+
+ uic_cmd->argument2 = ufshcd_get_uic_cmd_result(hba);
+ uic_cmd->argument3 = ufshcd_get_dme_attr_val(hba);
+
+ debug("Sent successfully\n");
+
+ return 0;
+}
+
+/**
+ * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET
+ *
+ */
+int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, u8 attr_set,
+ u32 mib_val, u8 peer)
+{
+ struct uic_command uic_cmd = {0};
+ static const char *const action[] = {
+ "dme-set",
+ "dme-peer-set"
+ };
+ const char *set = action[!!peer];
+ int ret;
+ int retries = UFS_UIC_COMMAND_RETRIES;
+
+ uic_cmd.command = peer ?
+ UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET;
+ uic_cmd.argument1 = attr_sel;
+ uic_cmd.argument2 = UIC_ARG_ATTR_TYPE(attr_set);
+ uic_cmd.argument3 = mib_val;
+
+ do {
+ /* for peer attributes we retry upon failure */
+ ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret)
+ dev_dbg(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n",
+ set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret);
+ } while (ret && peer && --retries);
+
+ if (ret)
+ dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x failed %d retries\n",
+ set, UIC_GET_ATTR_ID(attr_sel), mib_val,
+ UFS_UIC_COMMAND_RETRIES - retries);
+
+ return ret;
+}
+
+/**
+ * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET
+ *
+ */
+int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+ u32 *mib_val, u8 peer)
+{
+ struct uic_command uic_cmd = {0};
+ static const char *const action[] = {
+ "dme-get",
+ "dme-peer-get"
+ };
+ const char *get = action[!!peer];
+ int ret;
+ int retries = UFS_UIC_COMMAND_RETRIES;
+
+ uic_cmd.command = peer ?
+ UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET;
+ uic_cmd.argument1 = attr_sel;
+
+ do {
+ /* for peer attributes we retry upon failure */
+ ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret)
+ dev_dbg(hba->dev, "%s: attr-id 0x%x error code %d\n",
+ get, UIC_GET_ATTR_ID(attr_sel), ret);
+ } while (ret && peer && --retries);
+
+ if (ret)
+ dev_err(hba->dev, "%s: attr-id 0x%x failed %d retries\n",
+ get, UIC_GET_ATTR_ID(attr_sel),
+ UFS_UIC_COMMAND_RETRIES - retries);
+
+ if (mib_val && !ret)
+ *mib_val = uic_cmd.argument3;
+
+ return ret;
+}
+
+static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer)
+{
+ u32 tx_lanes, i, err = 0;
+
+ if (!peer)
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
+ &tx_lanes);
+ else
+ ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
+ &tx_lanes);
+ for (i = 0; i < tx_lanes; i++) {
+ if (!peer)
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB_SEL(TX_LCC_ENABLE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)),
+ 0);
+ else
+ err = ufshcd_dme_peer_set(hba,
+ UIC_ARG_MIB_SEL(TX_LCC_ENABLE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)),
+ 0);
+ if (err) {
+ dev_err(hba->dev, "%s: TX LCC Disable failed, peer = %d, lane = %d, err = %d",
+ __func__, peer, i, err);
+ break;
+ }
+ }
+
+ return err;
+}
+
+static inline int ufshcd_disable_device_tx_lcc(struct ufs_hba *hba)
+{
+ return ufshcd_disable_tx_lcc(hba, true);
+}
+
+/**
+ * ufshcd_dme_link_startup - Notify Unipro to perform link startup
+ *
+ */
+static int ufshcd_dme_link_startup(struct ufs_hba *hba)
+{
+ struct uic_command uic_cmd = {0};
+ int ret;
+
+ uic_cmd.command = UIC_CMD_DME_LINK_STARTUP;
+
+ ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret)
+ dev_dbg(hba->dev,
+ "dme-link-startup: error code %d\n", ret);
+ return ret;
+}
+
+/**
+ * ufshcd_disable_intr_aggr - Disables interrupt aggregation.
+ *
+ */
+static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba)
+{
+ ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
+}
+
+/**
+ * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY
+ */
+static inline int ufshcd_get_lists_status(u32 reg)
+{
+ return !((reg & UFSHCD_STATUS_READY) == UFSHCD_STATUS_READY);
+}
+
+/**
+ * ufshcd_enable_run_stop_reg - Enable run-stop registers,
+ * When run-stop registers are set to 1, it indicates the
+ * host controller that it can process the requests
+ */
+static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
+{
+ ufshcd_writel(hba, UTP_TASK_REQ_LIST_RUN_STOP_BIT,
+ REG_UTP_TASK_REQ_LIST_RUN_STOP);
+ ufshcd_writel(hba, UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT,
+ REG_UTP_TRANSFER_REQ_LIST_RUN_STOP);
+}
+
+/**
+ * ufshcd_enable_intr - enable interrupts
+ */
+static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs)
+{
+ u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
+ u32 rw;
+
+ if (hba->version == UFSHCI_VERSION_10) {
+ rw = set & INTERRUPT_MASK_RW_VER_10;
+ set = rw | ((set ^ intrs) & intrs);
+ } else {
+ set |= intrs;
+ }
+
+ ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE);
+
+ hba->intr_mask = set;
+}
+
+/**
+ * ufshcd_make_hba_operational - Make UFS controller operational
+ *
+ * To bring UFS host controller to operational state,
+ * 1. Enable required interrupts
+ * 2. Configure interrupt aggregation
+ * 3. Program UTRL and UTMRL base address
+ * 4. Configure run-stop-registers
+ *
+ */
+static int ufshcd_make_hba_operational(struct ufs_hba *hba)
+{
+ int err = 0;
+ u32 reg;
+
+ /* Enable required interrupts */
+ ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
+
+ /* Disable interrupt aggregation */
+ ufshcd_disable_intr_aggr(hba);
+
+ /* Configure UTRL and UTMRL base address registers */
+ ufshcd_writel(hba, lower_32_bits((dma_addr_t)hba->utrdl),
+ REG_UTP_TRANSFER_REQ_LIST_BASE_L);
+ ufshcd_writel(hba, upper_32_bits((dma_addr_t)hba->utrdl),
+ REG_UTP_TRANSFER_REQ_LIST_BASE_H);
+ ufshcd_writel(hba, lower_32_bits((dma_addr_t)hba->utmrdl),
+ REG_UTP_TASK_REQ_LIST_BASE_L);
+ ufshcd_writel(hba, upper_32_bits((dma_addr_t)hba->utmrdl),
+ REG_UTP_TASK_REQ_LIST_BASE_H);
+
+ /*
+ * UCRDY, UTMRLDY and UTRLRDY bits must be 1
+ */
+ reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS);
+ if (!(ufshcd_get_lists_status(reg))) {
+ ufshcd_enable_run_stop_reg(hba);
+ } else {
+ dev_err(hba->dev,
+ "Host controller not ready to process requests");
+ err = -EIO;
+ goto out;
+ }
+
+out:
+ return err;
+}
+
+/**
+ * ufshcd_link_startup - Initialize unipro link startup
+ */
+static int ufshcd_link_startup(struct ufs_hba *hba)
+{
+ int ret;
+ int retries = DME_LINKSTARTUP_RETRIES;
+ bool link_startup_again = true;
+
+link_startup:
+ do {
+ ufshcd_ops_link_startup_notify(hba, PRE_CHANGE);
+
+ ret = ufshcd_dme_link_startup(hba);
+
+ /* check if device is detected by inter-connect layer */
+ if (!ret && !ufshcd_is_device_present(hba)) {
+ dev_err(hba->dev, "%s: Device not present\n", __func__);
+ ret = -ENXIO;
+ goto out;
+ }
+
+ /*
+ * DME link lost indication is only received when link is up,
+ * but we can't be sure if the link is up until link startup
+ * succeeds. So reset the local Uni-Pro and try again.
+ */
+ if (ret && ufshcd_hba_enable(hba))
+ goto out;
+ } while (ret && retries--);
+
+ if (ret)
+ /* failed to get the link up... retire */
+ goto out;
+
+ if (link_startup_again) {
+ link_startup_again = false;
+ retries = DME_LINKSTARTUP_RETRIES;
+ goto link_startup;
+ }
+
+ /* Mark that link is up in PWM-G1, 1-lane, SLOW-AUTO mode */
+ ufshcd_init_pwr_info(hba);
+
+ if (hba->quirks & UFSHCD_QUIRK_BROKEN_LCC) {
+ ret = ufshcd_disable_device_tx_lcc(hba);
+ if (ret)
+ goto out;
+ }
+
+ /* Include any host controller configuration via UIC commands */
+ ret = ufshcd_ops_link_startup_notify(hba, POST_CHANGE);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_make_hba_operational(hba);
+out:
+ if (ret)
+ dev_err(hba->dev, "link startup failed %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * ufshcd_hba_stop - Send controller to reset state
+ */
+static inline void ufshcd_hba_stop(struct ufs_hba *hba)
+{
+ int err;
+
+ ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE);
+ err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE,
+ CONTROLLER_ENABLE, CONTROLLER_DISABLE,
+ 10);
+ if (err)
+ dev_err(hba->dev, "%s: Controller disable failed\n", __func__);
+}
+
+/**
+ * ufshcd_is_hba_active - Get controller state
+ */
+static inline bool ufshcd_is_hba_active(struct ufs_hba *hba)
+{
+ return (ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & CONTROLLER_ENABLE)
+ ? false : true;
+}
+
+/**
+ * ufshcd_hba_start - Start controller initialization sequence
+ */
+static inline void ufshcd_hba_start(struct ufs_hba *hba)
+{
+ ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE);
+}
+
+/**
+ * ufshcd_hba_enable - initialize the controller
+ */
+static int ufshcd_hba_enable(struct ufs_hba *hba)
+{
+ int retry;
+
+ if (!ufshcd_is_hba_active(hba))
+ /* change controller state to "reset state" */
+ ufshcd_hba_stop(hba);
+
+ ufshcd_ops_hce_enable_notify(hba, PRE_CHANGE);
+
+ /* start controller initialization sequence */
+ ufshcd_hba_start(hba);
+
+ /*
+ * To initialize a UFS host controller HCE bit must be set to 1.
+ * During initialization the HCE bit value changes from 1->0->1.
+ * When the host controller completes initialization sequence
+ * it sets the value of HCE bit to 1. The same HCE bit is read back
+ * to check if the controller has completed initialization sequence.
+ * So without this delay the value HCE = 1, set in the previous
+ * instruction might be read back.
+ * This delay can be changed based on the controller.
+ */
+ mdelay(1);
+
+ /* wait for the host controller to complete initialization */
+ retry = 10;
+ while (ufshcd_is_hba_active(hba)) {
+ if (retry) {
+ retry--;
+ } else {
+ dev_err(hba->dev, "Controller enable failed\n");
+ return -EIO;
+ }
+ mdelay(5);
+ }
+
+ /* enable UIC related interrupts */
+ ufshcd_enable_intr(hba, UFSHCD_UIC_MASK);
+
+ ufshcd_ops_hce_enable_notify(hba, POST_CHANGE);
+
+ return 0;
+}
+
+/**
+ * ufshcd_host_memory_configure - configure local reference block with
+ * memory offsets
+ */
+static void ufshcd_host_memory_configure(struct ufs_hba *hba)
+{
+ struct utp_transfer_req_desc *utrdlp;
+ dma_addr_t cmd_desc_dma_addr;
+ u16 response_offset;
+ u16 prdt_offset;
+
+ utrdlp = hba->utrdl;
+ cmd_desc_dma_addr = (dma_addr_t)hba->ucdl;
+
+ utrdlp->command_desc_base_addr_lo =
+ cpu_to_le32(lower_32_bits(cmd_desc_dma_addr));
+ utrdlp->command_desc_base_addr_hi =
+ cpu_to_le32(upper_32_bits(cmd_desc_dma_addr));
+
+ response_offset = offsetof(struct utp_transfer_cmd_desc, response_upiu);
+ prdt_offset = offsetof(struct utp_transfer_cmd_desc, prd_table);
+
+ utrdlp->response_upiu_offset = cpu_to_le16(response_offset >> 2);
+ utrdlp->prd_table_offset = cpu_to_le16(prdt_offset >> 2);
+ utrdlp->response_upiu_length = cpu_to_le16(ALIGNED_UPIU_SIZE >> 2);
+
+ hba->ucd_req_ptr = (struct utp_upiu_req *)hba->ucdl;
+ hba->ucd_rsp_ptr =
+ (struct utp_upiu_rsp *)&hba->ucdl->response_upiu;
+ hba->ucd_prdt_ptr =
+ (struct ufshcd_sg_entry *)&hba->ucdl->prd_table;
+}
+
+/**
+ * ufshcd_memory_alloc - allocate memory for host memory space data structures
+ */
+static int ufshcd_memory_alloc(struct ufs_hba *hba)
+{
+ /* Allocate one Transfer Request Descriptor
+ * Should be aligned to 1k boundary.
+ */
+ hba->utrdl = memalign(1024, sizeof(struct utp_transfer_req_desc));
+ if (!hba->utrdl) {
+ dev_err(hba->dev, "Transfer Descriptor memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate one Command Descriptor
+ * Should be aligned to 1k boundary.
+ */
+ hba->ucdl = memalign(1024, sizeof(struct utp_transfer_cmd_desc));
+ if (!hba->ucdl) {
+ dev_err(hba->dev, "Command descriptor memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * ufshcd_get_intr_mask - Get the interrupt bit mask
+ */
+static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba)
+{
+ u32 intr_mask = 0;
+
+ switch (hba->version) {
+ case UFSHCI_VERSION_10:
+ intr_mask = INTERRUPT_MASK_ALL_VER_10;
+ break;
+ case UFSHCI_VERSION_11:
+ case UFSHCI_VERSION_20:
+ intr_mask = INTERRUPT_MASK_ALL_VER_11;
+ break;
+ case UFSHCI_VERSION_21:
+ default:
+ intr_mask = INTERRUPT_MASK_ALL_VER_21;
+ break;
+ }
+
+ return intr_mask;
+}
+
+/**
+ * ufshcd_get_ufs_version - Get the UFS version supported by the HBA
+ */
+static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba)
+{
+ return ufshcd_readl(hba, REG_UFS_VERSION);
+}
+
+/**
+ * ufshcd_get_upmcrs - Get the power mode change request status
+ */
+static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
+{
+ return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7;
+}
+
+/**
+ * ufshcd_prepare_req_desc_hdr() - Fills the requests header
+ * descriptor according to request
+ */
+static void ufshcd_prepare_req_desc_hdr(struct utp_transfer_req_desc *req_desc,
+ u32 *upiu_flags,
+ enum dma_data_direction cmd_dir)
+{
+ u32 data_direction;
+ u32 dword_0;
+
+ if (cmd_dir == DMA_FROM_DEVICE) {
+ data_direction = UTP_DEVICE_TO_HOST;
+ *upiu_flags = UPIU_CMD_FLAGS_READ;
+ } else if (cmd_dir == DMA_TO_DEVICE) {
+ data_direction = UTP_HOST_TO_DEVICE;
+ *upiu_flags = UPIU_CMD_FLAGS_WRITE;
+ } else {
+ data_direction = UTP_NO_DATA_TRANSFER;
+ *upiu_flags = UPIU_CMD_FLAGS_NONE;
+ }
+
+ dword_0 = data_direction | (0x1 << UPIU_COMMAND_TYPE_OFFSET);
+
+ /* Enable Interrupt for command */
+ dword_0 |= UTP_REQ_DESC_INT_CMD;
+
+ /* Transfer request descriptor header fields */
+ req_desc->header.dword_0 = cpu_to_le32(dword_0);
+ /* dword_1 is reserved, hence it is set to 0 */
+ req_desc->header.dword_1 = 0;
+ /*
+ * assigning invalid value for command status. Controller
+ * updates OCS on command completion, with the command
+ * status
+ */
+ req_desc->header.dword_2 =
+ cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
+ /* dword_3 is reserved, hence it is set to 0 */
+ req_desc->header.dword_3 = 0;
+
+ req_desc->prd_table_length = 0;
+}
+
+static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba,
+ u32 upiu_flags)
+{
+ struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr;
+ struct ufs_query *query = &hba->dev_cmd.query;
+ u16 len = be16_to_cpu(query->request.upiu_req.length);
+
+ /* Query request header */
+ ucd_req_ptr->header.dword_0 =
+ UPIU_HEADER_DWORD(UPIU_TRANSACTION_QUERY_REQ,
+ upiu_flags, 0, TASK_TAG);
+ ucd_req_ptr->header.dword_1 =
+ UPIU_HEADER_DWORD(0, query->request.query_func,
+ 0, 0);
+
+ /* Data segment length only need for WRITE_DESC */
+ if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC)
+ ucd_req_ptr->header.dword_2 =
+ UPIU_HEADER_DWORD(0, 0, (len >> 8), (u8)len);
+ else
+ ucd_req_ptr->header.dword_2 = 0;
+
+ /* Copy the Query Request buffer as is */
+ memcpy(&ucd_req_ptr->qr, &query->request.upiu_req, QUERY_OSF_SIZE);
+
+ /* Copy the Descriptor */
+ if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC)
+ memcpy(ucd_req_ptr + 1, query->descriptor, len);
+
+ memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp));
+}
+
+static inline void ufshcd_prepare_utp_nop_upiu(struct ufs_hba *hba)
+{
+ struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr;
+
+ memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req));
+
+ /* command descriptor fields */
+ ucd_req_ptr->header.dword_0 =
+ UPIU_HEADER_DWORD(UPIU_TRANSACTION_NOP_OUT, 0, 0, 0x1f);
+ /* clear rest of the fields of basic header */
+ ucd_req_ptr->header.dword_1 = 0;
+ ucd_req_ptr->header.dword_2 = 0;
+
+ memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp));
+}
+
+/**
+ * ufshcd_comp_devman_upiu - UFS Protocol Information Unit(UPIU)
+ * for Device Management Purposes
+ */
+static int ufshcd_comp_devman_upiu(struct ufs_hba *hba,
+ enum dev_cmd_type cmd_type)
+{
+ u32 upiu_flags;
+ int ret = 0;
+ struct utp_transfer_req_desc *req_desc = hba->utrdl;
+
+ hba->dev_cmd.type = cmd_type;
+
+ ufshcd_prepare_req_desc_hdr(req_desc, &upiu_flags, DMA_NONE);
+ switch (cmd_type) {
+ case DEV_CMD_TYPE_QUERY:
+ ufshcd_prepare_utp_query_req_upiu(hba, upiu_flags);
+ break;
+ case DEV_CMD_TYPE_NOP:
+ ufshcd_prepare_utp_nop_upiu(hba);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
+{
+ unsigned long start;
+ u32 intr_status;
+ u32 enabled_intr_status;
+
+ ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL);
+
+ start = get_timer(0);
+ do {
+ intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
+ enabled_intr_status = intr_status & hba->intr_mask;
+ ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS);
+
+ if (get_timer(start) > QUERY_REQ_TIMEOUT) {
+ dev_err(hba->dev,
+ "Timedout waiting for UTP response\n");
+
+ return -ETIMEDOUT;
+ }
+
+ if (enabled_intr_status & UFSHCD_ERROR_MASK) {
+ dev_err(hba->dev, "Error in status:%08x\n",
+ enabled_intr_status);
+
+ return -1;
+ }
+ } while (!(enabled_intr_status & UTP_TRANSFER_REQ_COMPL));
+
+ return 0;
+}
+
+/**
+ * ufshcd_get_req_rsp - returns the TR response transaction type
+ */
+static inline int ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr)
+{
+ return be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24;
+}
+
+/**
+ * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status
+ *
+ */
+static inline int ufshcd_get_tr_ocs(struct ufs_hba *hba)
+{
+ return le32_to_cpu(hba->utrdl->header.dword_2) & MASK_OCS;
+}
+
+static inline int ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr)
+{
+ return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT;
+}
+
+static int ufshcd_check_query_response(struct ufs_hba *hba)
+{
+ struct ufs_query_res *query_res = &hba->dev_cmd.query.response;
+
+ /* Get the UPIU response */
+ query_res->response = ufshcd_get_rsp_upiu_result(hba->ucd_rsp_ptr) >>
+ UPIU_RSP_CODE_OFFSET;
+ return query_res->response;
+}
+
+/**
+ * ufshcd_copy_query_response() - Copy the Query Response and the data
+ * descriptor
+ */
+static int ufshcd_copy_query_response(struct ufs_hba *hba)
+{
+ struct ufs_query_res *query_res = &hba->dev_cmd.query.response;
+
+ memcpy(&query_res->upiu_res, &hba->ucd_rsp_ptr->qr, QUERY_OSF_SIZE);
+
+ /* Get the descriptor */
+ if (hba->dev_cmd.query.descriptor &&
+ hba->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) {
+ u8 *descp = (u8 *)hba->ucd_rsp_ptr +
+ GENERAL_UPIU_REQUEST_SIZE;
+ u16 resp_len;
+ u16 buf_len;
+
+ /* data segment length */
+ resp_len = be32_to_cpu(hba->ucd_rsp_ptr->header.dword_2) &
+ MASK_QUERY_DATA_SEG_LEN;
+ buf_len =
+ be16_to_cpu(hba->dev_cmd.query.request.upiu_req.length);
+ if (likely(buf_len >= resp_len)) {
+ memcpy(hba->dev_cmd.query.descriptor, descp, resp_len);
+ } else {
+ dev_warn(hba->dev,
+ "%s: Response size is bigger than buffer",
+ __func__);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ufshcd_exec_dev_cmd - API for sending device management requests
+ */
+static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, enum dev_cmd_type cmd_type,
+ int timeout)
+{
+ int err;
+ int resp;
+
+ err = ufshcd_comp_devman_upiu(hba, cmd_type);
+ if (err)
+ return err;
+
+ err = ufshcd_send_command(hba, TASK_TAG);
+ if (err)
+ return err;
+
+ err = ufshcd_get_tr_ocs(hba);
+ if (err) {
+ dev_err(hba->dev, "Error in OCS:%d\n", err);
+ return -EINVAL;
+ }
+
+ resp = ufshcd_get_req_rsp(hba->ucd_rsp_ptr);
+ switch (resp) {
+ case UPIU_TRANSACTION_NOP_IN:
+ break;
+ case UPIU_TRANSACTION_QUERY_RSP:
+ err = ufshcd_check_query_response(hba);
+ if (!err)
+ err = ufshcd_copy_query_response(hba);
+ break;
+ case UPIU_TRANSACTION_REJECT_UPIU:
+ /* TODO: handle Reject UPIU Response */
+ err = -EPERM;
+ dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n",
+ __func__);
+ break;
+ default:
+ err = -EINVAL;
+ dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n",
+ __func__, resp);
+ }
+
+ return err;
+}
+
+/**
+ * ufshcd_init_query() - init the query response and request parameters
+ */
+static inline void ufshcd_init_query(struct ufs_hba *hba,
+ struct ufs_query_req **request,
+ struct ufs_query_res **response,
+ enum query_opcode opcode,
+ u8 idn, u8 index, u8 selector)
+{
+ *request = &hba->dev_cmd.query.request;
+ *response = &hba->dev_cmd.query.response;
+ memset(*request, 0, sizeof(struct ufs_query_req));
+ memset(*response, 0, sizeof(struct ufs_query_res));
+ (*request)->upiu_req.opcode = opcode;
+ (*request)->upiu_req.idn = idn;
+ (*request)->upiu_req.index = index;
+ (*request)->upiu_req.selector = selector;
+}
+
+/**
+ * ufshcd_query_flag() - API function for sending flag query requests
+ */
+int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
+ enum flag_idn idn, bool *flag_res)
+{
+ struct ufs_query_req *request = NULL;
+ struct ufs_query_res *response = NULL;
+ int err, index = 0, selector = 0;
+ int timeout = QUERY_REQ_TIMEOUT;
+
+ ufshcd_init_query(hba, &request, &response, opcode, idn, index,
+ selector);
+
+ switch (opcode) {
+ case UPIU_QUERY_OPCODE_SET_FLAG:
+ case UPIU_QUERY_OPCODE_CLEAR_FLAG:
+ case UPIU_QUERY_OPCODE_TOGGLE_FLAG:
+ request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST;
+ break;
+ case UPIU_QUERY_OPCODE_READ_FLAG:
+ request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST;
+ if (!flag_res) {
+ /* No dummy reads */
+ dev_err(hba->dev, "%s: Invalid argument for read request\n",
+ __func__);
+ err = -EINVAL;
+ goto out;
+ }
+ break;
+ default:
+ dev_err(hba->dev,
+ "%s: Expected query flag opcode but got = %d\n",
+ __func__, opcode);
+ err = -EINVAL;
+ goto out;
+ }
+
+ err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, timeout);
+
+ if (err) {
+ dev_err(hba->dev,
+ "%s: Sending flag query for idn %d failed, err = %d\n",
+ __func__, idn, err);
+ goto out;
+ }
+
+ if (flag_res)
+ *flag_res = (be32_to_cpu(response->upiu_res.value) &
+ MASK_QUERY_UPIU_FLAG_LOC) & 0x1;
+
+out:
+ return err;
+}
+
+static int ufshcd_query_flag_retry(struct ufs_hba *hba,
+ enum query_opcode opcode,
+ enum flag_idn idn, bool *flag_res)
+{
+ int ret;
+ int retries;
+
+ for (retries = 0; retries < QUERY_REQ_RETRIES; retries++) {
+ ret = ufshcd_query_flag(hba, opcode, idn, flag_res);
+ if (ret)
+ dev_dbg(hba->dev,
+ "%s: failed with error %d, retries %d\n",
+ __func__, ret, retries);
+ else
+ break;
+ }
+
+ if (ret)
+ dev_err(hba->dev,
+ "%s: query attribute, opcode %d, idn %d, failed with error %d after %d retires\n",
+ __func__, opcode, idn, ret, retries);
+ return ret;
+}
+
+static int __ufshcd_query_descriptor(struct ufs_hba *hba,
+ enum query_opcode opcode,
+ enum desc_idn idn, u8 index, u8 selector,
+ u8 *desc_buf, int *buf_len)
+{
+ struct ufs_query_req *request = NULL;
+ struct ufs_query_res *response = NULL;
+ int err;
+
+ if (!desc_buf) {
+ dev_err(hba->dev, "%s: descriptor buffer required for opcode 0x%x\n",
+ __func__, opcode);
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (*buf_len < QUERY_DESC_MIN_SIZE || *buf_len > QUERY_DESC_MAX_SIZE) {
+ dev_err(hba->dev, "%s: descriptor buffer size (%d) is out of range\n",
+ __func__, *buf_len);
+ err = -EINVAL;
+ goto out;
+ }
+
+ ufshcd_init_query(hba, &request, &response, opcode, idn, index,
+ selector);
+ hba->dev_cmd.query.descriptor = desc_buf;
+ request->upiu_req.length = cpu_to_be16(*buf_len);
+
+ switch (opcode) {
+ case UPIU_QUERY_OPCODE_WRITE_DESC:
+ request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST;
+ break;
+ case UPIU_QUERY_OPCODE_READ_DESC:
+ request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST;
+ break;
+ default:
+ dev_err(hba->dev, "%s: Expected query descriptor opcode but got = 0x%.2x\n",
+ __func__, opcode);
+ err = -EINVAL;
+ goto out;
+ }
+
+ err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT);
+
+ if (err) {
+ dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n",
+ __func__, opcode, idn, index, err);
+ goto out;
+ }
+
+ hba->dev_cmd.query.descriptor = NULL;
+ *buf_len = be16_to_cpu(response->upiu_res.length);
+
+out:
+ return err;
+}
+
+/**
+ * ufshcd_query_descriptor_retry - API function for sending descriptor requests
+ */
+int ufshcd_query_descriptor_retry(struct ufs_hba *hba, enum query_opcode opcode,
+ enum desc_idn idn, u8 index, u8 selector,
+ u8 *desc_buf, int *buf_len)
+{
+ int err;
+ int retries;
+
+ for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) {
+ err = __ufshcd_query_descriptor(hba, opcode, idn, index,
+ selector, desc_buf, buf_len);
+ if (!err || err == -EINVAL)
+ break;
+ }
+
+ return err;
+}
+
+/**
+ * ufshcd_read_desc_length - read the specified descriptor length from header
+ */
+static int ufshcd_read_desc_length(struct ufs_hba *hba, enum desc_idn desc_id,
+ int desc_index, int *desc_length)
+{
+ int ret;
+ u8 header[QUERY_DESC_HDR_SIZE];
+ int header_len = QUERY_DESC_HDR_SIZE;
+
+ if (desc_id >= QUERY_DESC_IDN_MAX)
+ return -EINVAL;
+
+ ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC,
+ desc_id, desc_index, 0, header,
+ &header_len);
+
+ if (ret) {
+ dev_err(hba->dev, "%s: Failed to get descriptor header id %d",
+ __func__, desc_id);
+ return ret;
+ } else if (desc_id != header[QUERY_DESC_DESC_TYPE_OFFSET]) {
+ dev_warn(hba->dev, "%s: descriptor header id %d and desc_id %d mismatch",
+ __func__, header[QUERY_DESC_DESC_TYPE_OFFSET],
+ desc_id);
+ ret = -EINVAL;
+ }
+
+ *desc_length = header[QUERY_DESC_LENGTH_OFFSET];
+
+ return ret;
+}
+
+static void ufshcd_init_desc_sizes(struct ufs_hba *hba)
+{
+ int err;
+
+ err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_DEVICE, 0,
+ &hba->desc_size.dev_desc);
+ if (err)
+ hba->desc_size.dev_desc = QUERY_DESC_DEVICE_DEF_SIZE;
+
+ err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_POWER, 0,
+ &hba->desc_size.pwr_desc);
+ if (err)
+ hba->desc_size.pwr_desc = QUERY_DESC_POWER_DEF_SIZE;
+
+ err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_INTERCONNECT, 0,
+ &hba->desc_size.interc_desc);
+ if (err)
+ hba->desc_size.interc_desc = QUERY_DESC_INTERCONNECT_DEF_SIZE;
+
+ err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_CONFIGURATION, 0,
+ &hba->desc_size.conf_desc);
+ if (err)
+ hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE;
+
+ err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_UNIT, 0,
+ &hba->desc_size.unit_desc);
+ if (err)
+ hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE;
+
+ err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_GEOMETRY, 0,
+ &hba->desc_size.geom_desc);
+ if (err)
+ hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE;
+
+ err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_HEALTH, 0,
+ &hba->desc_size.hlth_desc);
+ if (err)
+ hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE;
+}
+
+/**
+ * ufshcd_map_desc_id_to_length - map descriptor IDN to its length
+ *
+ */
+int ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
+ int *desc_len)
+{
+ switch (desc_id) {
+ case QUERY_DESC_IDN_DEVICE:
+ *desc_len = hba->desc_size.dev_desc;
+ break;
+ case QUERY_DESC_IDN_POWER:
+ *desc_len = hba->desc_size.pwr_desc;
+ break;
+ case QUERY_DESC_IDN_GEOMETRY:
+ *desc_len = hba->desc_size.geom_desc;
+ break;
+ case QUERY_DESC_IDN_CONFIGURATION:
+ *desc_len = hba->desc_size.conf_desc;
+ break;
+ case QUERY_DESC_IDN_UNIT:
+ *desc_len = hba->desc_size.unit_desc;
+ break;
+ case QUERY_DESC_IDN_INTERCONNECT:
+ *desc_len = hba->desc_size.interc_desc;
+ break;
+ case QUERY_DESC_IDN_STRING:
+ *desc_len = QUERY_DESC_MAX_SIZE;
+ break;
+ case QUERY_DESC_IDN_HEALTH:
+ *desc_len = hba->desc_size.hlth_desc;
+ break;
+ case QUERY_DESC_IDN_RFU_0:
+ case QUERY_DESC_IDN_RFU_1:
+ *desc_len = 0;
+ break;
+ default:
+ *desc_len = 0;
+ return -EINVAL;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(ufshcd_map_desc_id_to_length);
+
+/**
+ * ufshcd_read_desc_param - read the specified descriptor parameter
+ *
+ */
+int ufshcd_read_desc_param(struct ufs_hba *hba, enum desc_idn desc_id,
+ int desc_index, u8 param_offset, u8 *param_read_buf,
+ u8 param_size)
+{
+ int ret;
+ u8 *desc_buf;
+ int buff_len;
+ bool is_kmalloc = true;
+
+ /* Safety check */
+ if (desc_id >= QUERY_DESC_IDN_MAX || !param_size)
+ return -EINVAL;
+
+ /* Get the max length of descriptor from structure filled up at probe
+ * time.
+ */
+ ret = ufshcd_map_desc_id_to_length(hba, desc_id, &buff_len);
+
+ /* Sanity checks */
+ if (ret || !buff_len) {
+ dev_err(hba->dev, "%s: Failed to get full descriptor length",
+ __func__);
+ return ret;
+ }
+
+ /* Check whether we need temp memory */
+ if (param_offset != 0 || param_size < buff_len) {
+ desc_buf = kmalloc(buff_len, GFP_KERNEL);
+ if (!desc_buf)
+ return -ENOMEM;
+ } else {
+ desc_buf = param_read_buf;
+ is_kmalloc = false;
+ }
+
+ /* Request for full descriptor */
+ ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC,
+ desc_id, desc_index, 0, desc_buf,
+ &buff_len);
+
+ if (ret) {
+ dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d",
+ __func__, desc_id, desc_index, param_offset, ret);
+ goto out;
+ }
+
+ /* Sanity check */
+ if (desc_buf[QUERY_DESC_DESC_TYPE_OFFSET] != desc_id) {
+ dev_err(hba->dev, "%s: invalid desc_id %d in descriptor header",
+ __func__, desc_buf[QUERY_DESC_DESC_TYPE_OFFSET]);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Check wherher we will not copy more data, than available */
+ if (is_kmalloc && param_size > buff_len)
+ param_size = buff_len;
+
+ if (is_kmalloc)
+ memcpy(param_read_buf, &desc_buf[param_offset], param_size);
+out:
+ if (is_kmalloc)
+ kfree(desc_buf);
+ return ret;
+}
+
+/* replace non-printable or non-ASCII characters with spaces */
+static inline void ufshcd_remove_non_printable(uint8_t *val)
+{
+ if (!val)
+ return;
+
+ if (*val < 0x20 || *val > 0x7e)
+ *val = ' ';
+}
+
+/**
+ * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power
+ * state) and waits for it to take effect.
+ *
+ */
+static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)
+{
+ unsigned long start = 0;
+ u8 status;
+ int ret;
+
+ ret = ufshcd_send_uic_cmd(hba, cmd);
+ if (ret) {
+ dev_err(hba->dev,
+ "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n",
+ cmd->command, cmd->argument3, ret);
+
+ return ret;
+ }
+
+ start = get_timer(0);
+ do {
+ status = ufshcd_get_upmcrs(hba);
+ if (get_timer(start) > UFS_UIC_CMD_TIMEOUT) {
+ dev_err(hba->dev,
+ "pwr ctrl cmd 0x%x failed, host upmcrs:0x%x\n",
+ cmd->command, status);
+ ret = (status != PWR_OK) ? status : -1;
+ break;
+ }
+ } while (status != PWR_LOCAL);
+
+ return ret;
+}
+
+/**
+ * ufshcd_uic_change_pwr_mode - Perform the UIC power mode change
+ * using DME_SET primitives.
+ */
+static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
+{
+ struct uic_command uic_cmd = {0};
+ int ret;
+
+ uic_cmd.command = UIC_CMD_DME_SET;
+ uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE);
+ uic_cmd.argument3 = mode;
+ ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd);
+
+ return ret;
+}
+
+static
+void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufs_hba *hba,
+ struct scsi_cmd *pccb, u32 upiu_flags)
+{
+ struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr;
+ unsigned int cdb_len;
+
+ /* command descriptor fields */
+ ucd_req_ptr->header.dword_0 =
+ UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND, upiu_flags,
+ pccb->lun, TASK_TAG);
+ ucd_req_ptr->header.dword_1 =
+ UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0);
+
+ /* Total EHS length and Data segment length will be zero */
+ ucd_req_ptr->header.dword_2 = 0;
+
+ ucd_req_ptr->sc.exp_data_transfer_len = cpu_to_be32(pccb->datalen);
+
+ cdb_len = min_t(unsigned short, pccb->cmdlen, UFS_CDB_SIZE);
+ memset(ucd_req_ptr->sc.cdb, 0, UFS_CDB_SIZE);
+ memcpy(ucd_req_ptr->sc.cdb, pccb->cmd, cdb_len);
+
+ memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp));
+}
+
+static inline void prepare_prdt_desc(struct ufshcd_sg_entry *entry,
+ unsigned char *buf, ulong len)
+{
+ entry->size = cpu_to_le32(len) | GENMASK(1, 0);
+ entry->base_addr = cpu_to_le32(lower_32_bits((unsigned long)buf));
+ entry->upper_addr = cpu_to_le32(upper_32_bits((unsigned long)buf));
+}
+
+static void prepare_prdt_table(struct ufs_hba *hba, struct scsi_cmd *pccb)
+{
+ struct utp_transfer_req_desc *req_desc = hba->utrdl;
+ struct ufshcd_sg_entry *prd_table = hba->ucd_prdt_ptr;
+ ulong datalen = pccb->datalen;
+ int table_length;
+ u8 *buf;
+ int i;
+
+ if (!datalen) {
+ req_desc->prd_table_length = 0;
+ return;
+ }
+
+ table_length = DIV_ROUND_UP(pccb->datalen, MAX_PRDT_ENTRY);
+ buf = pccb->pdata;
+ i = table_length;
+ while (--i) {
+ prepare_prdt_desc(&prd_table[table_length - i - 1], buf,
+ MAX_PRDT_ENTRY - 1);
+ buf += MAX_PRDT_ENTRY;
+ datalen -= MAX_PRDT_ENTRY;
+ }
+
+ prepare_prdt_desc(&prd_table[table_length - i - 1], buf, datalen - 1);
+
+ req_desc->prd_table_length = table_length;
+}
+
+static int ufs_scsi_exec(struct udevice *scsi_dev, struct scsi_cmd *pccb)
+{
+ struct ufs_hba *hba = dev_get_uclass_priv(scsi_dev->parent);
+ struct utp_transfer_req_desc *req_desc = hba->utrdl;
+ u32 upiu_flags;
+ int ocs, result = 0;
+ u8 scsi_status;
+
+ ufshcd_prepare_req_desc_hdr(req_desc, &upiu_flags, pccb->dma_dir);
+ ufshcd_prepare_utp_scsi_cmd_upiu(hba, pccb, upiu_flags);
+ prepare_prdt_table(hba, pccb);
+
+ ufshcd_send_command(hba, TASK_TAG);
+
+ ocs = ufshcd_get_tr_ocs(hba);
+ switch (ocs) {
+ case OCS_SUCCESS:
+ result = ufshcd_get_req_rsp(hba->ucd_rsp_ptr);
+ switch (result) {
+ case UPIU_TRANSACTION_RESPONSE:
+ result = ufshcd_get_rsp_upiu_result(hba->ucd_rsp_ptr);
+
+ scsi_status = result & MASK_SCSI_STATUS;
+ if (scsi_status)
+ return -EINVAL;
+
+ break;
+ case UPIU_TRANSACTION_REJECT_UPIU:
+ /* TODO: handle Reject UPIU Response */
+ dev_err(hba->dev,
+ "Reject UPIU not fully implemented\n");
+ return -EINVAL;
+ default:
+ dev_err(hba->dev,
+ "Unexpected request response code = %x\n",
+ result);
+ return -EINVAL;
+ }
+ break;
+ default:
+ dev_err(hba->dev, "OCS error from controller = %x\n", ocs);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int ufshcd_read_desc(struct ufs_hba *hba, enum desc_idn desc_id,
+ int desc_index, u8 *buf, u32 size)
+{
+ return ufshcd_read_desc_param(hba, desc_id, desc_index, 0, buf, size);
+}
+
+static int ufshcd_read_device_desc(struct ufs_hba *hba, u8 *buf, u32 size)
+{
+ return ufshcd_read_desc(hba, QUERY_DESC_IDN_DEVICE, 0, buf, size);
+}
+
+/**
+ * ufshcd_read_string_desc - read string descriptor
+ *
+ */
+int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
+ u8 *buf, u32 size, bool ascii)
+{
+ int err = 0;
+
+ err = ufshcd_read_desc(hba, QUERY_DESC_IDN_STRING, desc_index, buf,
+ size);
+
+ if (err) {
+ dev_err(hba->dev, "%s: reading String Desc failed after %d retries. err = %d\n",
+ __func__, QUERY_REQ_RETRIES, err);
+ goto out;
+ }
+
+ if (ascii) {
+ int desc_len;
+ int ascii_len;
+ int i;
+ u8 *buff_ascii;
+
+ desc_len = buf[0];
+ /* remove header and divide by 2 to move from UTF16 to UTF8 */
+ ascii_len = (desc_len - QUERY_DESC_HDR_SIZE) / 2 + 1;
+ if (size < ascii_len + QUERY_DESC_HDR_SIZE) {
+ dev_err(hba->dev, "%s: buffer allocated size is too small\n",
+ __func__);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ buff_ascii = kmalloc(ascii_len, GFP_KERNEL);
+ if (!buff_ascii) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * the descriptor contains string in UTF16 format
+ * we need to convert to utf-8 so it can be displayed
+ */
+ utf16_to_utf8(buff_ascii,
+ (uint16_t *)&buf[QUERY_DESC_HDR_SIZE], ascii_len);
+
+ /* replace non-printable or non-ASCII characters with spaces */
+ for (i = 0; i < ascii_len; i++)
+ ufshcd_remove_non_printable(&buff_ascii[i]);
+
+ memset(buf + QUERY_DESC_HDR_SIZE, 0,
+ size - QUERY_DESC_HDR_SIZE);
+ memcpy(buf + QUERY_DESC_HDR_SIZE, buff_ascii, ascii_len);
+ buf[QUERY_DESC_LENGTH_OFFSET] = ascii_len + QUERY_DESC_HDR_SIZE;
+ kfree(buff_ascii);
+ }
+out:
+ return err;
+}
+
+static int ufs_get_device_desc(struct ufs_hba *hba,
+ struct ufs_dev_desc *dev_desc)
+{
+ int err;
+ size_t buff_len;
+ u8 model_index;
+ u8 *desc_buf;
+
+ buff_len = max_t(size_t, hba->desc_size.dev_desc,
+ QUERY_DESC_MAX_SIZE + 1);
+ desc_buf = kmalloc(buff_len, GFP_KERNEL);
+ if (!desc_buf) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = ufshcd_read_device_desc(hba, desc_buf, hba->desc_size.dev_desc);
+ if (err) {
+ dev_err(hba->dev, "%s: Failed reading Device Desc. err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ /*
+ * getting vendor (manufacturerID) and Bank Index in big endian
+ * format
+ */
+ dev_desc->wmanufacturerid = desc_buf[DEVICE_DESC_PARAM_MANF_ID] << 8 |
+ desc_buf[DEVICE_DESC_PARAM_MANF_ID + 1];
+
+ model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];
+
+ /* Zero-pad entire buffer for string termination. */
+ memset(desc_buf, 0, buff_len);
+
+ err = ufshcd_read_string_desc(hba, model_index, desc_buf,
+ QUERY_DESC_MAX_SIZE, true/*ASCII*/);
+ if (err) {
+ dev_err(hba->dev, "%s: Failed reading Product Name. err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ desc_buf[QUERY_DESC_MAX_SIZE] = '\0';
+ strlcpy(dev_desc->model, (char *)(desc_buf + QUERY_DESC_HDR_SIZE),
+ min_t(u8, desc_buf[QUERY_DESC_LENGTH_OFFSET],
+ MAX_MODEL_LEN));
+
+ /* Null terminate the model string */
+ dev_desc->model[MAX_MODEL_LEN] = '\0';
+
+out:
+ kfree(desc_buf);
+ return err;
+}
+
+/**
+ * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device
+ */
+static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba)
+{
+ struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info;
+
+ if (hba->max_pwr_info.is_valid)
+ return 0;
+
+ pwr_info->pwr_tx = FAST_MODE;
+ pwr_info->pwr_rx = FAST_MODE;
+ pwr_info->hs_rate = PA_HS_MODE_B;
+
+ /* Get the connected lane count */
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
+ &pwr_info->lane_rx);
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
+ &pwr_info->lane_tx);
+
+ if (!pwr_info->lane_rx || !pwr_info->lane_tx) {
+ dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n",
+ __func__, pwr_info->lane_rx, pwr_info->lane_tx);
+ return -EINVAL;
+ }
+
+ /*
+ * First, get the maximum gears of HS speed.
+ * If a zero value, it means there is no HSGEAR capability.
+ * Then, get the maximum gears of PWM speed.
+ */
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx);
+ if (!pwr_info->gear_rx) {
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR),
+ &pwr_info->gear_rx);
+ if (!pwr_info->gear_rx) {
+ dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n",
+ __func__, pwr_info->gear_rx);
+ return -EINVAL;
+ }
+ pwr_info->pwr_rx = SLOW_MODE;
+ }
+
+ ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR),
+ &pwr_info->gear_tx);
+ if (!pwr_info->gear_tx) {
+ ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR),
+ &pwr_info->gear_tx);
+ if (!pwr_info->gear_tx) {
+ dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n",
+ __func__, pwr_info->gear_tx);
+ return -EINVAL;
+ }
+ pwr_info->pwr_tx = SLOW_MODE;
+ }
+
+ hba->max_pwr_info.is_valid = true;
+ return 0;
+}
+
+static int ufshcd_change_power_mode(struct ufs_hba *hba,
+ struct ufs_pa_layer_attr *pwr_mode)
+{
+ int ret;
+
+ /* if already configured to the requested pwr_mode */
+ if (pwr_mode->gear_rx == hba->pwr_info.gear_rx &&
+ pwr_mode->gear_tx == hba->pwr_info.gear_tx &&
+ pwr_mode->lane_rx == hba->pwr_info.lane_rx &&
+ pwr_mode->lane_tx == hba->pwr_info.lane_tx &&
+ pwr_mode->pwr_rx == hba->pwr_info.pwr_rx &&
+ pwr_mode->pwr_tx == hba->pwr_info.pwr_tx &&
+ pwr_mode->hs_rate == hba->pwr_info.hs_rate) {
+ dev_dbg(hba->dev, "%s: power already configured\n", __func__);
+ return 0;
+ }
+
+ /*
+ * Configure attributes for power mode change with below.
+ * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION,
+ * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION,
+ * - PA_HSSERIES
+ */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES),
+ pwr_mode->lane_rx);
+ if (pwr_mode->pwr_rx == FASTAUTO_MODE || pwr_mode->pwr_rx == FAST_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE);
+ else
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), FALSE);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES),
+ pwr_mode->lane_tx);
+ if (pwr_mode->pwr_tx == FASTAUTO_MODE || pwr_mode->pwr_tx == FAST_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE);
+ else
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), FALSE);
+
+ if (pwr_mode->pwr_rx == FASTAUTO_MODE ||
+ pwr_mode->pwr_tx == FASTAUTO_MODE ||
+ pwr_mode->pwr_rx == FAST_MODE ||
+ pwr_mode->pwr_tx == FAST_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES),
+ pwr_mode->hs_rate);
+
+ ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4 |
+ pwr_mode->pwr_tx);
+
+ if (ret) {
+ dev_err(hba->dev,
+ "%s: power mode change failed %d\n", __func__, ret);
+
+ return ret;
+ }
+
+ /* Copy new Power Mode to power info */
+ memcpy(&hba->pwr_info, pwr_mode, sizeof(struct ufs_pa_layer_attr));
+
+ return ret;
+}
+
+/**
+ * ufshcd_verify_dev_init() - Verify device initialization
+ *
+ */
+static int ufshcd_verify_dev_init(struct ufs_hba *hba)
+{
+ int retries;
+ int err;
+
+ for (retries = NOP_OUT_RETRIES; retries > 0; retries--) {
+ err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP,
+ NOP_OUT_TIMEOUT);
+ if (!err || err == -ETIMEDOUT)
+ break;
+
+ dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err);
+ }
+
+ if (err)
+ dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err);
+
+ return err;
+}
+
+/**
+ * ufshcd_complete_dev_init() - checks device readiness
+ */
+static int ufshcd_complete_dev_init(struct ufs_hba *hba)
+{
+ int i;
+ int err;
+ bool flag_res = 1;
+
+ err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
+ QUERY_FLAG_IDN_FDEVICEINIT, NULL);
+ if (err) {
+ dev_err(hba->dev,
+ "%s setting fDeviceInit flag failed with error %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ /* poll for max. 1000 iterations for fDeviceInit flag to clear */
+ for (i = 0; i < 1000 && !err && flag_res; i++)
+ err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG,
+ QUERY_FLAG_IDN_FDEVICEINIT,
+ &flag_res);
+
+ if (err)
+ dev_err(hba->dev,
+ "%s reading fDeviceInit flag failed with error %d\n",
+ __func__, err);
+ else if (flag_res)
+ dev_err(hba->dev,
+ "%s fDeviceInit was not cleared by the device\n",
+ __func__);
+
+out:
+ return err;
+}
+
+static void ufshcd_def_desc_sizes(struct ufs_hba *hba)
+{
+ hba->desc_size.dev_desc = QUERY_DESC_DEVICE_DEF_SIZE;
+ hba->desc_size.pwr_desc = QUERY_DESC_POWER_DEF_SIZE;
+ hba->desc_size.interc_desc = QUERY_DESC_INTERCONNECT_DEF_SIZE;
+ hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE;
+ hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE;
+ hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE;
+ hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE;
+}
+
+int ufs_start(struct ufs_hba *hba)
+{
+ struct ufs_dev_desc card = {0};
+ int ret;
+
+ ret = ufshcd_link_startup(hba);
+ if (ret)
+ return ret;
+
+ ret = ufshcd_verify_dev_init(hba);
+ if (ret)
+ return ret;
+
+ ret = ufshcd_complete_dev_init(hba);
+ if (ret)
+ return ret;
+
+ /* Init check for device descriptor sizes */
+ ufshcd_init_desc_sizes(hba);
+
+ ret = ufs_get_device_desc(hba, &card);
+ if (ret) {
+ dev_err(hba->dev, "%s: Failed getting device info. err = %d\n",
+ __func__, ret);
+
+ return ret;
+ }
+
+ if (ufshcd_get_max_pwr_mode(hba)) {
+ dev_err(hba->dev,
+ "%s: Failed getting max supported power mode\n",
+ __func__);
+ } else {
+ ret = ufshcd_change_power_mode(hba, &hba->max_pwr_info.info);
+ if (ret) {
+ dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n",
+ __func__, ret);
+
+ return ret;
+ }
+
+ printf("Device at %s up at:", hba->dev->name);
+ ufshcd_print_pwr_info(hba);
+ }
+
+ return 0;
+}
+
+int ufshcd_probe(struct udevice *ufs_dev, struct ufs_hba_ops *hba_ops)
+{
+ struct ufs_hba *hba = dev_get_uclass_priv(ufs_dev);
+ struct scsi_platdata *scsi_plat;
+ struct udevice *scsi_dev;
+ int err;
+
+ device_find_first_child(ufs_dev, &scsi_dev);
+ if (!scsi_dev)
+ return -ENODEV;
+
+ scsi_plat = dev_get_uclass_platdata(scsi_dev);
+ scsi_plat->max_id = UFSHCD_MAX_ID;
+ scsi_plat->max_lun = UFS_MAX_LUNS;
+ scsi_plat->max_bytes_per_req = UFS_MAX_BYTES;
+
+ hba->dev = ufs_dev;
+ hba->ops = hba_ops;
+ hba->mmio_base = (void *)dev_read_addr(ufs_dev);
+
+ /* Set descriptor lengths to specification defaults */
+ ufshcd_def_desc_sizes(hba);
+
+ ufshcd_ops_init(hba);
+
+ /* Read capabilties registers */
+ hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES);
+
+ /* Get UFS version supported by the controller */
+ hba->version = ufshcd_get_ufs_version(hba);
+ if (hba->version != UFSHCI_VERSION_10 &&
+ hba->version != UFSHCI_VERSION_11 &&
+ hba->version != UFSHCI_VERSION_20 &&
+ hba->version != UFSHCI_VERSION_21)
+ dev_err(hba->dev, "invalid UFS version 0x%x\n",
+ hba->version);
+
+ /* Get Interrupt bit mask per version */
+ hba->intr_mask = ufshcd_get_intr_mask(hba);
+
+ /* Allocate memory for host memory space */
+ err = ufshcd_memory_alloc(hba);
+ if (err) {
+ dev_err(hba->dev, "Memory allocation failed\n");
+ return err;
+ }
+
+ /* Configure Local data structures */
+ ufshcd_host_memory_configure(hba);
+
+ /*
+ * In order to avoid any spurious interrupt immediately after
+ * registering UFS controller interrupt handler, clear any pending UFS
+ * interrupt status and disable all the UFS interrupts.
+ */
+ ufshcd_writel(hba, ufshcd_readl(hba, REG_INTERRUPT_STATUS),
+ REG_INTERRUPT_STATUS);
+ ufshcd_writel(hba, 0, REG_INTERRUPT_ENABLE);
+
+ err = ufshcd_hba_enable(hba);
+ if (err) {
+ dev_err(hba->dev, "Host controller enable failed\n");
+ return err;
+ }
+
+ err = ufs_start(hba);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+int ufs_scsi_bind(struct udevice *ufs_dev, struct udevice **scsi_devp)
+{
+ int ret = device_bind_driver(ufs_dev, "ufs_scsi", "ufs_scsi",
+ scsi_devp);
+
+ return ret;
+}
+
+static struct scsi_ops ufs_ops = {
+ .exec = ufs_scsi_exec,
+};
+
+int ufs_probe_dev(int index)
+{
+ struct udevice *dev;
+
+ return uclass_get_device(UCLASS_UFS, index, &dev);
+}
+
+int ufs_probe(void)
+{
+ struct udevice *dev;
+ int ret, i;
+
+ for (i = 0;; i++) {
+ ret = uclass_get_device(UCLASS_UFS, i, &dev);
+ if (ret == -ENODEV)
+ break;
+ }
+
+ return 0;
+}
+
+U_BOOT_DRIVER(ufs_scsi) = {
+ .id = UCLASS_SCSI,
+ .name = "ufs_scsi",
+ .ops = &ufs_ops,
+};
diff --git a/drivers/ufs/ufs.h b/drivers/ufs/ufs.h
new file mode 100644
index 0000000000..e0bde93776
--- /dev/null
+++ b/drivers/ufs/ufs.h
@@ -0,0 +1,918 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef __UFS_H
+#define __UFS_H
+
+#include <asm/io.h>
+#include <dm.h>
+
+#include "unipro.h"
+
+#define UFS_CDB_SIZE 16
+#define UPIU_TRANSACTION_UIC_CMD 0x1F
+#define UIC_CMD_SIZE (sizeof(u32) * 4)
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH 18
+#define UFS_MAX_LUNS 0x7F
+
+enum {
+ TASK_REQ_UPIU_SIZE_DWORDS = 8,
+ TASK_RSP_UPIU_SIZE_DWORDS = 8,
+ ALIGNED_UPIU_SIZE = 512,
+};
+
+/* UFS device power modes */
+enum ufs_dev_pwr_mode {
+ UFS_ACTIVE_PWR_MODE = 1,
+ UFS_SLEEP_PWR_MODE = 2,
+ UFS_POWERDOWN_PWR_MODE = 3,
+};
+
+enum ufs_notify_change_status {
+ PRE_CHANGE,
+ POST_CHANGE,
+};
+
+struct ufs_pa_layer_attr {
+ u32 gear_rx;
+ u32 gear_tx;
+ u32 lane_rx;
+ u32 lane_tx;
+ u32 pwr_rx;
+ u32 pwr_tx;
+ u32 hs_rate;
+};
+
+struct ufs_pwr_mode_info {
+ bool is_valid;
+ struct ufs_pa_layer_attr info;
+};
+
+enum ufs_desc_def_size {
+ QUERY_DESC_DEVICE_DEF_SIZE = 0x40,
+ QUERY_DESC_CONFIGURATION_DEF_SIZE = 0x90,
+ QUERY_DESC_UNIT_DEF_SIZE = 0x23,
+ QUERY_DESC_INTERCONNECT_DEF_SIZE = 0x06,
+ QUERY_DESC_GEOMETRY_DEF_SIZE = 0x48,
+ QUERY_DESC_POWER_DEF_SIZE = 0x62,
+ QUERY_DESC_HEALTH_DEF_SIZE = 0x25,
+};
+
+struct ufs_desc_size {
+ int dev_desc;
+ int pwr_desc;
+ int geom_desc;
+ int interc_desc;
+ int unit_desc;
+ int conf_desc;
+ int hlth_desc;
+};
+
+/*
+ * Request Descriptor Definitions
+ */
+
+/* Transfer request command type */
+enum {
+ UTP_CMD_TYPE_SCSI = 0x0,
+ UTP_CMD_TYPE_UFS = 0x1,
+ UTP_CMD_TYPE_DEV_MANAGE = 0x2,
+};
+
+/* UTP Transfer Request Command Offset */
+#define UPIU_COMMAND_TYPE_OFFSET 28
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET 8
+
+/* To accommodate UFS2.0 required Command type */
+enum {
+ UTP_CMD_TYPE_UFS_STORAGE = 0x1,
+};
+
+enum {
+ UTP_SCSI_COMMAND = 0x00000000,
+ UTP_NATIVE_UFS_COMMAND = 0x10000000,
+ UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
+ UTP_REQ_DESC_INT_CMD = 0x01000000,
+};
+
+/* UTP Transfer Request Data Direction (DD) */
+enum {
+ UTP_NO_DATA_TRANSFER = 0x00000000,
+ UTP_HOST_TO_DEVICE = 0x02000000,
+ UTP_DEVICE_TO_HOST = 0x04000000,
+};
+
+/* Overall command status values */
+enum {
+ OCS_SUCCESS = 0x0,
+ OCS_INVALID_CMD_TABLE_ATTR = 0x1,
+ OCS_INVALID_PRDT_ATTR = 0x2,
+ OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
+ OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
+ OCS_PEER_COMM_FAILURE = 0x5,
+ OCS_ABORTED = 0x6,
+ OCS_FATAL_ERROR = 0x7,
+ OCS_INVALID_COMMAND_STATUS = 0x0F,
+ MASK_OCS = 0x0F,
+};
+
+/* The maximum length of the data byte count field in the PRDT is 256KB */
+#define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024)
+/* The granularity of the data byte count field in the PRDT is 32-bit */
+#define PRDT_DATA_BYTE_COUNT_PAD 4
+
+#define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req))
+#define QUERY_DESC_MAX_SIZE 255
+#define QUERY_DESC_MIN_SIZE 2
+#define QUERY_DESC_HDR_SIZE 2
+#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \
+ (sizeof(struct utp_upiu_header)))
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH 18
+#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
+ cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
+ (byte1 << 8) | (byte0))
+/*
+ * UFS Protocol Information Unit related definitions
+ */
+
+/* Task management functions */
+enum {
+ UFS_ABORT_TASK = 0x01,
+ UFS_ABORT_TASK_SET = 0x02,
+ UFS_CLEAR_TASK_SET = 0x04,
+ UFS_LOGICAL_RESET = 0x08,
+ UFS_QUERY_TASK = 0x80,
+ UFS_QUERY_TASK_SET = 0x81,
+};
+
+/* UTP UPIU Transaction Codes Initiator to Target */
+enum {
+ UPIU_TRANSACTION_NOP_OUT = 0x00,
+ UPIU_TRANSACTION_COMMAND = 0x01,
+ UPIU_TRANSACTION_DATA_OUT = 0x02,
+ UPIU_TRANSACTION_TASK_REQ = 0x04,
+ UPIU_TRANSACTION_QUERY_REQ = 0x16,
+};
+
+/* UTP UPIU Transaction Codes Target to Initiator */
+enum {
+ UPIU_TRANSACTION_NOP_IN = 0x20,
+ UPIU_TRANSACTION_RESPONSE = 0x21,
+ UPIU_TRANSACTION_DATA_IN = 0x22,
+ UPIU_TRANSACTION_TASK_RSP = 0x24,
+ UPIU_TRANSACTION_READY_XFER = 0x31,
+ UPIU_TRANSACTION_QUERY_RSP = 0x36,
+ UPIU_TRANSACTION_REJECT_UPIU = 0x3F,
+};
+
+/* UPIU Read/Write flags */
+enum {
+ UPIU_CMD_FLAGS_NONE = 0x00,
+ UPIU_CMD_FLAGS_WRITE = 0x20,
+ UPIU_CMD_FLAGS_READ = 0x40,
+};
+
+/* UPIU Task Attributes */
+enum {
+ UPIU_TASK_ATTR_SIMPLE = 0x00,
+ UPIU_TASK_ATTR_ORDERED = 0x01,
+ UPIU_TASK_ATTR_HEADQ = 0x02,
+ UPIU_TASK_ATTR_ACA = 0x03,
+};
+
+/* UPIU Query request function */
+enum {
+ UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01,
+ UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81,
+};
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET 8
+
+enum {
+ MASK_SCSI_STATUS = 0xFF,
+ MASK_TASK_RESPONSE = 0xFF00,
+ MASK_RSP_UPIU_RESULT = 0xFFFF,
+ MASK_QUERY_DATA_SEG_LEN = 0xFFFF,
+ MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF,
+ MASK_RSP_EXCEPTION_EVENT = 0x10000,
+ MASK_TM_SERVICE_RESP = 0xFF,
+ MASK_TM_FUNC = 0xFF,
+};
+
+/* UTP QUERY Transaction Specific Fields OpCode */
+enum query_opcode {
+ UPIU_QUERY_OPCODE_NOP = 0x0,
+ UPIU_QUERY_OPCODE_READ_DESC = 0x1,
+ UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
+ UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
+ UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
+ UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
+ UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
+ UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
+ UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
+};
+
+/* Query response result code */
+enum {
+ QUERY_RESULT_SUCCESS = 0x00,
+ QUERY_RESULT_NOT_READABLE = 0xF6,
+ QUERY_RESULT_NOT_WRITEABLE = 0xF7,
+ QUERY_RESULT_ALREADY_WRITTEN = 0xF8,
+ QUERY_RESULT_INVALID_LENGTH = 0xF9,
+ QUERY_RESULT_INVALID_VALUE = 0xFA,
+ QUERY_RESULT_INVALID_SELECTOR = 0xFB,
+ QUERY_RESULT_INVALID_INDEX = 0xFC,
+ QUERY_RESULT_INVALID_IDN = 0xFD,
+ QUERY_RESULT_INVALID_OPCODE = 0xFE,
+ QUERY_RESULT_GENERAL_FAILURE = 0xFF,
+};
+
+enum {
+ UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
+ UPIU_COMMAND_SET_TYPE_UFS = 0x1,
+ UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
+};
+
+/* Flag idn for Query Requests*/
+enum flag_idn {
+ QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
+ QUERY_FLAG_IDN_PERMANENT_WPE = 0x02,
+ QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
+ QUERY_FLAG_IDN_BKOPS_EN = 0x04,
+ QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE = 0x05,
+ QUERY_FLAG_IDN_PURGE_ENABLE = 0x06,
+ QUERY_FLAG_IDN_RESERVED2 = 0x07,
+ QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL = 0x08,
+ QUERY_FLAG_IDN_BUSY_RTC = 0x09,
+ QUERY_FLAG_IDN_RESERVED3 = 0x0A,
+ QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B,
+};
+
+/* Attribute idn for Query requests */
+enum attr_idn {
+ QUERY_ATTR_IDN_BOOT_LU_EN = 0x00,
+ QUERY_ATTR_IDN_RESERVED = 0x01,
+ QUERY_ATTR_IDN_POWER_MODE = 0x02,
+ QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
+ QUERY_ATTR_IDN_OOO_DATA_EN = 0x04,
+ QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
+ QUERY_ATTR_IDN_PURGE_STATUS = 0x06,
+ QUERY_ATTR_IDN_MAX_DATA_IN = 0x07,
+ QUERY_ATTR_IDN_MAX_DATA_OUT = 0x08,
+ QUERY_ATTR_IDN_DYN_CAP_NEEDED = 0x09,
+ QUERY_ATTR_IDN_REF_CLK_FREQ = 0x0A,
+ QUERY_ATTR_IDN_CONF_DESC_LOCK = 0x0B,
+ QUERY_ATTR_IDN_MAX_NUM_OF_RTT = 0x0C,
+ QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
+ QUERY_ATTR_IDN_EE_STATUS = 0x0E,
+ QUERY_ATTR_IDN_SECONDS_PASSED = 0x0F,
+ QUERY_ATTR_IDN_CNTX_CONF = 0x10,
+ QUERY_ATTR_IDN_CORR_PRG_BLK_NUM = 0x11,
+ QUERY_ATTR_IDN_RESERVED2 = 0x12,
+ QUERY_ATTR_IDN_RESERVED3 = 0x13,
+ QUERY_ATTR_IDN_FFU_STATUS = 0x14,
+ QUERY_ATTR_IDN_PSA_STATE = 0x15,
+ QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16,
+};
+
+/* Descriptor idn for Query requests */
+enum desc_idn {
+ QUERY_DESC_IDN_DEVICE = 0x0,
+ QUERY_DESC_IDN_CONFIGURATION = 0x1,
+ QUERY_DESC_IDN_UNIT = 0x2,
+ QUERY_DESC_IDN_RFU_0 = 0x3,
+ QUERY_DESC_IDN_INTERCONNECT = 0x4,
+ QUERY_DESC_IDN_STRING = 0x5,
+ QUERY_DESC_IDN_RFU_1 = 0x6,
+ QUERY_DESC_IDN_GEOMETRY = 0x7,
+ QUERY_DESC_IDN_POWER = 0x8,
+ QUERY_DESC_IDN_HEALTH = 0x9,
+ QUERY_DESC_IDN_MAX,
+};
+
+enum desc_header_offset {
+ QUERY_DESC_LENGTH_OFFSET = 0x00,
+ QUERY_DESC_DESC_TYPE_OFFSET = 0x01,
+};
+
+struct ufshcd_sg_entry {
+ __le32 base_addr;
+ __le32 upper_addr;
+ __le32 reserved;
+ __le32 size;
+};
+
+#define MAX_BUFF 128
+/**
+ * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
+ * @command_upiu: Command UPIU Frame address
+ * @response_upiu: Response UPIU Frame address
+ * @prd_table: Physical Region Descriptor
+ */
+struct utp_transfer_cmd_desc {
+ u8 command_upiu[ALIGNED_UPIU_SIZE];
+ u8 response_upiu[ALIGNED_UPIU_SIZE];
+ struct ufshcd_sg_entry prd_table[MAX_BUFF];
+};
+
+/**
+ * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
+ * @dword0: Descriptor Header DW0
+ * @dword1: Descriptor Header DW1
+ * @dword2: Descriptor Header DW2
+ * @dword3: Descriptor Header DW3
+ */
+struct request_desc_header {
+ __le32 dword_0;
+ __le32 dword_1;
+ __le32 dword_2;
+ __le32 dword_3;
+};
+
+/**
+ * struct utp_transfer_req_desc - UTRD structure
+ * @header: UTRD header DW-0 to DW-3
+ * @command_desc_base_addr_lo: UCD base address low DW-4
+ * @command_desc_base_addr_hi: UCD base address high DW-5
+ * @response_upiu_length: response UPIU length DW-6
+ * @response_upiu_offset: response UPIU offset DW-6
+ * @prd_table_length: Physical region descriptor length DW-7
+ * @prd_table_offset: Physical region descriptor offset DW-7
+ */
+struct utp_transfer_req_desc {
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-5*/
+ __le32 command_desc_base_addr_lo;
+ __le32 command_desc_base_addr_hi;
+
+ /* DW 6 */
+ __le16 response_upiu_length;
+ __le16 response_upiu_offset;
+
+ /* DW 7 */
+ __le16 prd_table_length;
+ __le16 prd_table_offset;
+};
+
+/**
+ * struct utp_upiu_header - UPIU header structure
+ * @dword_0: UPIU header DW-0
+ * @dword_1: UPIU header DW-1
+ * @dword_2: UPIU header DW-2
+ */
+struct utp_upiu_header {
+ __be32 dword_0;
+ __be32 dword_1;
+ __be32 dword_2;
+};
+
+/**
+ * struct utp_upiu_query - upiu request buffer structure for
+ * query request.
+ * @opcode: command to perform B-0
+ * @idn: a value that indicates the particular type of data B-1
+ * @index: Index to further identify data B-2
+ * @selector: Index to further identify data B-3
+ * @reserved_osf: spec reserved field B-4,5
+ * @length: number of descriptor bytes to read/write B-6,7
+ * @value: Attribute value to be written DW-5
+ * @reserved: spec reserved DW-6,7
+ */
+struct utp_upiu_query {
+ __u8 opcode;
+ __u8 idn;
+ __u8 index;
+ __u8 selector;
+ __be16 reserved_osf;
+ __be16 length;
+ __be32 value;
+ __be32 reserved[2];
+};
+
+/**
+ * struct utp_upiu_cmd - Command UPIU structure
+ * @data_transfer_len: Data Transfer Length DW-3
+ * @cdb: Command Descriptor Block CDB DW-4 to DW-7
+ */
+struct utp_upiu_cmd {
+ __be32 exp_data_transfer_len;
+ u8 cdb[UFS_CDB_SIZE];
+};
+
+/*
+ * UTMRD structure.
+ */
+struct utp_task_req_desc {
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-11 - Task request UPIU structure */
+ struct utp_upiu_header req_header;
+ __be32 input_param1;
+ __be32 input_param2;
+ __be32 input_param3;
+ __be32 __reserved1[2];
+
+ /* DW 12-19 - Task Management Response UPIU structure */
+ struct utp_upiu_header rsp_header;
+ __be32 output_param1;
+ __be32 output_param2;
+ __be32 __reserved2[3];
+};
+
+/**
+ * struct utp_upiu_req - general upiu request structure
+ * @header:UPIU header structure DW-0 to DW-2
+ * @sc: fields structure for scsi command DW-3 to DW-7
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_req {
+ struct utp_upiu_header header;
+ union {
+ struct utp_upiu_cmd sc;
+ struct utp_upiu_query qr;
+ struct utp_upiu_query tr;
+ /* use utp_upiu_query to host the 4 dwords of uic command */
+ struct utp_upiu_query uc;
+ };
+};
+
+/**
+ * struct utp_cmd_rsp - Response UPIU structure
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @sense_data: Sense data field DW-8 to DW-12
+ */
+struct utp_cmd_rsp {
+ __be32 residual_transfer_count;
+ __be32 reserved[4];
+ __be16 sense_data_len;
+ u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH];
+};
+
+/**
+ * struct utp_upiu_rsp - general upiu response structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @sr: fields structure for scsi command DW-3 to DW-12
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_rsp {
+ struct utp_upiu_header header;
+ union {
+ struct utp_cmd_rsp sr;
+ struct utp_upiu_query qr;
+ };
+};
+
+#define MAX_MODEL_LEN 16
+/**
+ * ufs_dev_desc - ufs device details from the device descriptor
+ *
+ * @wmanufacturerid: card details
+ * @model: card model
+ */
+struct ufs_dev_desc {
+ u16 wmanufacturerid;
+ char model[MAX_MODEL_LEN + 1];
+};
+
+/* Device descriptor parameters offsets in bytes*/
+enum device_desc_param {
+ DEVICE_DESC_PARAM_LEN = 0x0,
+ DEVICE_DESC_PARAM_TYPE = 0x1,
+ DEVICE_DESC_PARAM_DEVICE_TYPE = 0x2,
+ DEVICE_DESC_PARAM_DEVICE_CLASS = 0x3,
+ DEVICE_DESC_PARAM_DEVICE_SUB_CLASS = 0x4,
+ DEVICE_DESC_PARAM_PRTCL = 0x5,
+ DEVICE_DESC_PARAM_NUM_LU = 0x6,
+ DEVICE_DESC_PARAM_NUM_WLU = 0x7,
+ DEVICE_DESC_PARAM_BOOT_ENBL = 0x8,
+ DEVICE_DESC_PARAM_DESC_ACCSS_ENBL = 0x9,
+ DEVICE_DESC_PARAM_INIT_PWR_MODE = 0xA,
+ DEVICE_DESC_PARAM_HIGH_PR_LUN = 0xB,
+ DEVICE_DESC_PARAM_SEC_RMV_TYPE = 0xC,
+ DEVICE_DESC_PARAM_SEC_LU = 0xD,
+ DEVICE_DESC_PARAM_BKOP_TERM_LT = 0xE,
+ DEVICE_DESC_PARAM_ACTVE_ICC_LVL = 0xF,
+ DEVICE_DESC_PARAM_SPEC_VER = 0x10,
+ DEVICE_DESC_PARAM_MANF_DATE = 0x12,
+ DEVICE_DESC_PARAM_MANF_NAME = 0x14,
+ DEVICE_DESC_PARAM_PRDCT_NAME = 0x15,
+ DEVICE_DESC_PARAM_SN = 0x16,
+ DEVICE_DESC_PARAM_OEM_ID = 0x17,
+ DEVICE_DESC_PARAM_MANF_ID = 0x18,
+ DEVICE_DESC_PARAM_UD_OFFSET = 0x1A,
+ DEVICE_DESC_PARAM_UD_LEN = 0x1B,
+ DEVICE_DESC_PARAM_RTT_CAP = 0x1C,
+ DEVICE_DESC_PARAM_FRQ_RTC = 0x1D,
+ DEVICE_DESC_PARAM_UFS_FEAT = 0x1F,
+ DEVICE_DESC_PARAM_FFU_TMT = 0x20,
+ DEVICE_DESC_PARAM_Q_DPTH = 0x21,
+ DEVICE_DESC_PARAM_DEV_VER = 0x22,
+ DEVICE_DESC_PARAM_NUM_SEC_WPA = 0x24,
+ DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25,
+ DEVICE_DESC_PARAM_PSA_TMT = 0x29,
+ DEVICE_DESC_PARAM_PRDCT_REV = 0x2A,
+};
+
+struct ufs_hba;
+
+enum {
+ UFSHCD_MAX_CHANNEL = 0,
+ UFSHCD_MAX_ID = 1,
+};
+
+enum dev_cmd_type {
+ DEV_CMD_TYPE_NOP = 0x0,
+ DEV_CMD_TYPE_QUERY = 0x1,
+};
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @result: UIC command result
+ * @done: UIC command completion
+ */
+struct uic_command {
+ u32 command;
+ u32 argument1;
+ u32 argument2;
+ u32 argument3;
+ int cmd_active;
+ int result;
+};
+
+/* GenSelectorIndex calculation macros for M-PHY attributes */
+#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
+#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
+
+#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
+ ((sel) & 0xFFFF))
+#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0)
+#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16)
+#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
+
+/* Link Status*/
+enum link_status {
+ UFSHCD_LINK_IS_DOWN = 1,
+ UFSHCD_LINK_IS_UP = 2,
+};
+
+#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
+ ((sel) & 0xFFFF))
+#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0)
+#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16)
+#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
+
+/* UIC Commands */
+enum uic_cmd_dme {
+ UIC_CMD_DME_GET = 0x01,
+ UIC_CMD_DME_SET = 0x02,
+ UIC_CMD_DME_PEER_GET = 0x03,
+ UIC_CMD_DME_PEER_SET = 0x04,
+ UIC_CMD_DME_POWERON = 0x10,
+ UIC_CMD_DME_POWEROFF = 0x11,
+ UIC_CMD_DME_ENABLE = 0x12,
+ UIC_CMD_DME_RESET = 0x14,
+ UIC_CMD_DME_END_PT_RST = 0x15,
+ UIC_CMD_DME_LINK_STARTUP = 0x16,
+ UIC_CMD_DME_HIBER_ENTER = 0x17,
+ UIC_CMD_DME_HIBER_EXIT = 0x18,
+ UIC_CMD_DME_TEST_MODE = 0x1A,
+};
+
+/* UIC Config result code / Generic error code */
+enum {
+ UIC_CMD_RESULT_SUCCESS = 0x00,
+ UIC_CMD_RESULT_INVALID_ATTR = 0x01,
+ UIC_CMD_RESULT_FAILURE = 0x01,
+ UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
+ UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
+ UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
+ UIC_CMD_RESULT_BAD_INDEX = 0x05,
+ UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
+ UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
+ UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
+ UIC_CMD_RESULT_BUSY = 0x09,
+ UIC_CMD_RESULT_DME_FAILURE = 0x0A,
+};
+
+#define MASK_UIC_COMMAND_RESULT 0xFF
+
+/* Host <-> Device UniPro Link state */
+enum uic_link_state {
+ UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */
+ UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */
+ UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */
+};
+
+/* UIC command interfaces for DME primitives */
+#define DME_LOCAL 0
+#define DME_PEER 1
+#define ATTR_SET_NOR 0 /* NORMAL */
+#define ATTR_SET_ST 1 /* STATIC */
+
+int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
+ u8 attr_set, u32 mib_val, u8 peer);
+int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+ u32 *mib_val, u8 peer);
+
+static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+ mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_get(struct ufs_hba *hba,
+ u32 attr_sel, u32 *mib_val)
+{
+ return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
+ u32 attr_sel, u32 *mib_val)
+{
+ return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+ mib_val, DME_PEER);
+}
+
+/**
+ * struct ufs_query_req - parameters for building a query request
+ * @query_func: UPIU header query function
+ * @upiu_req: the query request data
+ */
+struct ufs_query_req {
+ u8 query_func;
+ struct utp_upiu_query upiu_req;
+};
+
+/**
+ * struct ufs_query_resp - UPIU QUERY
+ * @response: device response code
+ * @upiu_res: query response data
+ */
+struct ufs_query_res {
+ u8 response;
+ struct utp_upiu_query upiu_res;
+};
+
+/**
+ * struct ufs_query - holds relevant data structures for query request
+ * @request: request upiu and function
+ * @descriptor: buffer for sending/receiving descriptor
+ * @response: response upiu and response
+ */
+struct ufs_query {
+ struct ufs_query_req request;
+ u8 *descriptor;
+ struct ufs_query_res response;
+};
+
+/**
+ * struct ufs_dev_cmd - all assosiated fields with device management commands
+ * @type: device management command type - Query, NOP OUT
+ * @tag_wq: wait queue until free command slot is available
+ */
+struct ufs_dev_cmd {
+ enum dev_cmd_type type;
+ struct ufs_query query;
+};
+
+struct ufs_hba_ops {
+ int (*init)(struct ufs_hba *hba);
+ int (*hce_enable_notify)(struct ufs_hba *hba,
+ enum ufs_notify_change_status);
+ int (*link_startup_notify)(struct ufs_hba *hba,
+ enum ufs_notify_change_status);
+ int (*phy_initialization)(struct ufs_hba *hba);
+};
+
+struct ufs_hba {
+ struct udevice *dev;
+ void __iomem *mmio_base;
+ struct ufs_hba_ops *ops;
+ struct ufs_desc_size desc_size;
+ u32 capabilities;
+ u32 version;
+ u32 intr_mask;
+ u32 quirks;
+/*
+ * If UFS host controller is having issue in processing LCC (Line
+ * Control Command) coming from device then enable this quirk.
+ * When this quirk is enabled, host controller driver should disable
+ * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
+ * attribute of device to 0).
+ */
+#define UFSHCD_QUIRK_BROKEN_LCC 0x1
+
+ /* Virtual memory reference */
+ struct utp_transfer_cmd_desc *ucdl;
+ struct utp_transfer_req_desc *utrdl;
+ /* TODO: Add Task Manegement Support */
+ struct utp_task_req_desc *utmrdl;
+
+ struct utp_upiu_req *ucd_req_ptr;
+ struct utp_upiu_rsp *ucd_rsp_ptr;
+ struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+ /* Power Mode information */
+ enum ufs_dev_pwr_mode curr_dev_pwr_mode;
+ struct ufs_pa_layer_attr pwr_info;
+ struct ufs_pwr_mode_info max_pwr_info;
+
+ struct ufs_dev_cmd dev_cmd;
+};
+
+static inline int ufshcd_ops_init(struct ufs_hba *hba)
+{
+ if (hba->ops && hba->ops->init)
+ return hba->ops->init(hba);
+
+ return 0;
+}
+
+static inline int ufshcd_ops_hce_enable_notify(struct ufs_hba *hba,
+ bool status)
+{
+ if (hba->ops && hba->ops->hce_enable_notify)
+ return hba->ops->hce_enable_notify(hba, status);
+
+ return 0;
+}
+
+static inline int ufshcd_ops_link_startup_notify(struct ufs_hba *hba,
+ bool status)
+{
+ if (hba->ops && hba->ops->link_startup_notify)
+ return hba->ops->link_startup_notify(hba, status);
+
+ return 0;
+}
+
+/* Controller UFSHCI version */
+enum {
+ UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */
+ UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
+ UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
+ UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
+};
+
+/* Interrupt disable masks */
+enum {
+ /* Interrupt disable mask for UFSHCI v1.0 */
+ INTERRUPT_MASK_ALL_VER_10 = 0x30FFF,
+ INTERRUPT_MASK_RW_VER_10 = 0x30000,
+
+ /* Interrupt disable mask for UFSHCI v1.1 */
+ INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
+
+ /* Interrupt disable mask for UFSHCI v2.1 */
+ INTERRUPT_MASK_ALL_VER_21 = 0x71FFF,
+};
+
+/* UFSHCI Registers */
+enum {
+ REG_CONTROLLER_CAPABILITIES = 0x00,
+ REG_UFS_VERSION = 0x08,
+ REG_CONTROLLER_DEV_ID = 0x10,
+ REG_CONTROLLER_PROD_ID = 0x14,
+ REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18,
+ REG_INTERRUPT_STATUS = 0x20,
+ REG_INTERRUPT_ENABLE = 0x24,
+ REG_CONTROLLER_STATUS = 0x30,
+ REG_CONTROLLER_ENABLE = 0x34,
+ REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
+ REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
+ REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
+ REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
+ REG_UIC_ERROR_CODE_DME = 0x48,
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
+ REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
+ REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
+ REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
+ REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
+ REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
+ REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
+ REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
+ REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
+ REG_UIC_COMMAND = 0x90,
+ REG_UIC_COMMAND_ARG_1 = 0x94,
+ REG_UIC_COMMAND_ARG_2 = 0x98,
+ REG_UIC_COMMAND_ARG_3 = 0x9C,
+
+ UFSHCI_REG_SPACE_SIZE = 0xA0,
+
+ REG_UFS_CCAP = 0x100,
+ REG_UFS_CRYPTOCAP = 0x104,
+
+ UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400,
+};
+
+/* Controller capability masks */
+enum {
+ MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
+ MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
+ MASK_AUTO_HIBERN8_SUPPORT = 0x00800000,
+ MASK_64_ADDRESSING_SUPPORT = 0x01000000,
+ MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
+ MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
+};
+
+/* Interrupt Status 20h */
+#define UTP_TRANSFER_REQ_COMPL 0x1
+#define UIC_DME_END_PT_RESET 0x2
+#define UIC_ERROR 0x4
+#define UIC_TEST_MODE 0x8
+#define UIC_POWER_MODE 0x10
+#define UIC_HIBERNATE_EXIT 0x20
+#define UIC_HIBERNATE_ENTER 0x40
+#define UIC_LINK_LOST 0x80
+#define UIC_LINK_STARTUP 0x100
+#define UTP_TASK_REQ_COMPL 0x200
+#define UIC_COMMAND_COMPL 0x400
+#define DEVICE_FATAL_ERROR 0x800
+#define CONTROLLER_FATAL_ERROR 0x10000
+#define SYSTEM_BUS_FATAL_ERROR 0x20000
+
+#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\
+ UIC_HIBERNATE_EXIT |\
+ UIC_POWER_MODE)
+
+#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UIC_POWER_MODE)
+
+#define UFSHCD_ERROR_MASK (UIC_ERROR |\
+ DEVICE_FATAL_ERROR |\
+ CONTROLLER_FATAL_ERROR |\
+ SYSTEM_BUS_FATAL_ERROR)
+
+#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
+ CONTROLLER_FATAL_ERROR |\
+ SYSTEM_BUS_FATAL_ERROR)
+
+/* Host Controller Enable 0x34h */
+#define CONTROLLER_ENABLE 0x1
+#define CONTROLLER_DISABLE 0x0
+/* HCS - Host Controller Status 30h */
+#define DEVICE_PRESENT 0x1
+#define UTP_TRANSFER_REQ_LIST_READY 0x2
+#define UTP_TASK_REQ_LIST_READY 0x4
+#define UIC_COMMAND_READY 0x8
+#define HOST_ERROR_INDICATOR 0x10
+#define DEVICE_ERROR_INDICATOR 0x20
+#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
+
+#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\
+ UTP_TASK_REQ_LIST_READY |\
+ UIC_COMMAND_READY)
+
+enum {
+ PWR_OK = 0x0,
+ PWR_LOCAL = 0x01,
+ PWR_REMOTE = 0x02,
+ PWR_BUSY = 0x03,
+ PWR_ERROR_CAP = 0x04,
+ PWR_FATAL_ERROR = 0x05,
+};
+
+/* UICCMD - UIC Command */
+#define COMMAND_OPCODE_MASK 0xFF
+#define GEN_SELECTOR_INDEX_MASK 0xFFFF
+
+#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
+#define RESET_LEVEL 0xFF
+
+#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
+#define CONFIG_RESULT_CODE_MASK 0xFF
+#define GENERIC_ERROR_CODE_MASK 0xFF
+
+#define ufshcd_writel(hba, val, reg) \
+ writel((val), (hba)->mmio_base + (reg))
+#define ufshcd_readl(hba, reg) \
+ readl((hba)->mmio_base + (reg))
+
+/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1
+
+/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1
+
+int ufshcd_probe(struct udevice *dev, struct ufs_hba_ops *hba_ops);
+
+#endif
diff --git a/drivers/ufs/unipro.h b/drivers/ufs/unipro.h
new file mode 100644
index 0000000000..b30b17fa5a
--- /dev/null
+++ b/drivers/ufs/unipro.h
@@ -0,0 +1,270 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef _UNIPRO_H_
+#define _UNIPRO_H_
+
+/*
+ * M-TX Configuration Attributes
+ */
+#define TX_HIBERN8TIME_CAPABILITY 0x000F
+#define TX_MODE 0x0021
+#define TX_HSRATE_SERIES 0x0022
+#define TX_HSGEAR 0x0023
+#define TX_PWMGEAR 0x0024
+#define TX_AMPLITUDE 0x0025
+#define TX_HS_SLEWRATE 0x0026
+#define TX_SYNC_SOURCE 0x0027
+#define TX_HS_SYNC_LENGTH 0x0028
+#define TX_HS_PREPARE_LENGTH 0x0029
+#define TX_LS_PREPARE_LENGTH 0x002A
+#define TX_HIBERN8_CONTROL 0x002B
+#define TX_LCC_ENABLE 0x002C
+#define TX_PWM_BURST_CLOSURE_EXTENSION 0x002D
+#define TX_BYPASS_8B10B_ENABLE 0x002E
+#define TX_DRIVER_POLARITY 0x002F
+#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE 0x0030
+#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE 0x0031
+#define TX_LCC_SEQUENCER 0x0032
+#define TX_MIN_ACTIVATETIME 0x0033
+#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034
+#define TX_REFCLKFREQ 0x00EB
+#define TX_CFGCLKFREQVAL 0x00EC
+#define CFGEXTRATTR 0x00F0
+#define DITHERCTRL2 0x00F1
+
+/*
+ * M-RX Configuration Attributes
+ */
+#define RX_MODE 0x00A1
+#define RX_HSRATE_SERIES 0x00A2
+#define RX_HSGEAR 0x00A3
+#define RX_PWMGEAR 0x00A4
+#define RX_LS_TERMINATED_ENABLE 0x00A5
+#define RX_HS_UNTERMINATED_ENABLE 0x00A6
+#define RX_ENTER_HIBERN8 0x00A7
+#define RX_BYPASS_8B10B_ENABLE 0x00A8
+#define RX_TERMINATION_FORCE_ENABLE 0x0089
+#define RX_MIN_ACTIVATETIME_CAPABILITY 0x008F
+#define RX_HIBERN8TIME_CAPABILITY 0x0092
+#define RX_REFCLKFREQ 0x00EB
+#define RX_CFGCLKFREQVAL 0x00EC
+#define CFGWIDEINLN 0x00F0
+#define CFGRXCDR8 0x00BA
+#define ENARXDIRECTCFG4 0x00F2
+#define CFGRXOVR8 0x00BD
+#define RXDIRECTCTRL2 0x00C7
+#define ENARXDIRECTCFG3 0x00F3
+#define RXCALCTRL 0x00B4
+#define ENARXDIRECTCFG2 0x00F4
+#define CFGRXOVR4 0x00E9
+#define RXSQCTRL 0x00B5
+#define CFGRXOVR6 0x00BF
+
+#define is_mphy_tx_attr(attr) (attr < RX_MODE)
+#define RX_MIN_ACTIVATETIME_UNIT_US 100
+#define HIBERN8TIME_UNIT_US 100
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19 UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10 UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6 UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5 UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2 UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x) (0x8000 | x)
+
+/*
+ * PHY Adpater attributes
+ */
+#define PA_ACTIVETXDATALANES 0x1560
+#define PA_ACTIVERXDATALANES 0x1580
+#define PA_TXTRAILINGCLOCKS 0x1564
+#define PA_PHY_TYPE 0x1500
+#define PA_AVAILTXDATALANES 0x1520
+#define PA_AVAILRXDATALANES 0x1540
+#define PA_MINRXTRAILINGCLOCKS 0x1543
+#define PA_TXPWRSTATUS 0x1567
+#define PA_RXPWRSTATUS 0x1582
+#define PA_TXFORCECLOCK 0x1562
+#define PA_TXPWRMODE 0x1563
+#define PA_LEGACYDPHYESCDL 0x1570
+#define PA_MAXTXSPEEDFAST 0x1521
+#define PA_MAXTXSPEEDSLOW 0x1522
+#define PA_MAXRXSPEEDFAST 0x1541
+#define PA_MAXRXSPEEDSLOW 0x1542
+#define PA_TXLINKSTARTUPHS 0x1544
+#define PA_LOCAL_TX_LCC_ENABLE 0x155E
+#define PA_TXSPEEDFAST 0x1565
+#define PA_TXSPEEDSLOW 0x1566
+#define PA_REMOTEVERINFO 0x15A0
+#define PA_TXGEAR 0x1568
+#define PA_TXTERMINATION 0x1569
+#define PA_HSSERIES 0x156A
+#define PA_PWRMODE 0x1571
+#define PA_RXGEAR 0x1583
+#define PA_RXTERMINATION 0x1584
+#define PA_MAXRXPWMGEAR 0x1586
+#define PA_MAXRXHSGEAR 0x1587
+#define PA_RXHSUNTERMCAP 0x15A5
+#define PA_RXLSTERMCAP 0x15A6
+#define PA_GRANULARITY 0x15AA
+#define PA_PACPREQTIMEOUT 0x1590
+#define PA_PACPREQEOBTIMEOUT 0x1591
+#define PA_HIBERN8TIME 0x15A7
+#define PA_LOCALVERINFO 0x15A9
+#define PA_TACTIVATE 0x15A8
+#define PA_PACPFRAMECOUNT 0x15C0
+#define PA_PACPERRORCOUNT 0x15C1
+#define PA_PHYTESTCONTROL 0x15C2
+#define PA_PWRMODEUSERDATA0 0x15B0
+#define PA_PWRMODEUSERDATA1 0x15B1
+#define PA_PWRMODEUSERDATA2 0x15B2
+#define PA_PWRMODEUSERDATA3 0x15B3
+#define PA_PWRMODEUSERDATA4 0x15B4
+#define PA_PWRMODEUSERDATA5 0x15B5
+#define PA_PWRMODEUSERDATA6 0x15B6
+#define PA_PWRMODEUSERDATA7 0x15B7
+#define PA_PWRMODEUSERDATA8 0x15B8
+#define PA_PWRMODEUSERDATA9 0x15B9
+#define PA_PWRMODEUSERDATA10 0x15BA
+#define PA_PWRMODEUSERDATA11 0x15BB
+#define PA_CONNECTEDTXDATALANES 0x1561
+#define PA_CONNECTEDRXDATALANES 0x1581
+#define PA_LOGICALLANEMAP 0x15A1
+#define PA_SLEEPNOCONFIGTIME 0x15A2
+#define PA_STALLNOCONFIGTIME 0x15A3
+#define PA_SAVECONFIGTIME 0x15A4
+
+#define PA_TACTIVATE_TIME_UNIT_US 10
+#define PA_HIBERN8_TIME_UNIT_US 100
+
+/*Other attributes*/
+#define VS_MPHYCFGUPDT 0xD085
+#define VS_DEBUGOMC 0xD09E
+#define VS_POWERSTATE 0xD083
+
+#define PA_GRANULARITY_MIN_VAL 1
+#define PA_GRANULARITY_MAX_VAL 6
+
+/* PHY Adapter Protocol Constants */
+#define PA_MAXDATALANES 4
+
+/* PA power modes */
+enum {
+ FAST_MODE = 1,
+ SLOW_MODE = 2,
+ FASTAUTO_MODE = 4,
+ SLOWAUTO_MODE = 5,
+ UNCHANGED = 7,
+};
+
+/* PA TX/RX Frequency Series */
+enum {
+ PA_HS_MODE_A = 1,
+ PA_HS_MODE_B = 2,
+};
+
+enum ufs_pwm_gear_tag {
+ UFS_PWM_DONT_CHANGE, /* Don't change Gear */
+ UFS_PWM_G1, /* PWM Gear 1 (default for reset) */
+ UFS_PWM_G2, /* PWM Gear 2 */
+ UFS_PWM_G3, /* PWM Gear 3 */
+ UFS_PWM_G4, /* PWM Gear 4 */
+ UFS_PWM_G5, /* PWM Gear 5 */
+ UFS_PWM_G6, /* PWM Gear 6 */
+ UFS_PWM_G7, /* PWM Gear 7 */
+};
+
+enum ufs_hs_gear_tag {
+ UFS_HS_DONT_CHANGE, /* Don't change Gear */
+ UFS_HS_G1, /* HS Gear 1 (default for reset) */
+ UFS_HS_G2, /* HS Gear 2 */
+ UFS_HS_G3, /* HS Gear 3 */
+};
+
+enum ufs_unipro_ver {
+ UFS_UNIPRO_VER_RESERVED = 0,
+ UFS_UNIPRO_VER_1_40 = 1, /* UniPro version 1.40 */
+ UFS_UNIPRO_VER_1_41 = 2, /* UniPro version 1.41 */
+ UFS_UNIPRO_VER_1_6 = 3, /* UniPro version 1.6 */
+ UFS_UNIPRO_VER_MAX = 4, /* UniPro unsupported version */
+ /* UniPro version field mask in PA_LOCALVERINFO */
+ UFS_UNIPRO_VER_MASK = 0xF,
+};
+
+/*
+ * Data Link Layer Attributes
+ */
+#define DL_TC0TXFCTHRESHOLD 0x2040
+#define DL_FC0PROTTIMEOUTVAL 0x2041
+#define DL_TC0REPLAYTIMEOUTVAL 0x2042
+#define DL_AFC0REQTIMEOUTVAL 0x2043
+#define DL_AFC0CREDITTHRESHOLD 0x2044
+#define DL_TC0OUTACKTHRESHOLD 0x2045
+#define DL_TC1TXFCTHRESHOLD 0x2060
+#define DL_FC1PROTTIMEOUTVAL 0x2061
+#define DL_TC1REPLAYTIMEOUTVAL 0x2062
+#define DL_AFC1REQTIMEOUTVAL 0x2063
+#define DL_AFC1CREDITTHRESHOLD 0x2064
+#define DL_TC1OUTACKTHRESHOLD 0x2065
+#define DL_TXPREEMPTIONCAP 0x2000
+#define DL_TC0TXMAXSDUSIZE 0x2001
+#define DL_TC0RXINITCREDITVAL 0x2002
+#define DL_TC0TXBUFFERSIZE 0x2005
+#define DL_PEERTC0PRESENT 0x2046
+#define DL_PEERTC0RXINITCREVAL 0x2047
+#define DL_TC1TXMAXSDUSIZE 0x2003
+#define DL_TC1RXINITCREDITVAL 0x2004
+#define DL_TC1TXBUFFERSIZE 0x2006
+#define DL_PEERTC1PRESENT 0x2066
+#define DL_PEERTC1RXINITCREVAL 0x2067
+
+/*
+ * Network Layer Attributes
+ */
+#define N_DEVICEID 0x3000
+#define N_DEVICEID_VALID 0x3001
+#define N_TC0TXMAXSDUSIZE 0x3020
+#define N_TC1TXMAXSDUSIZE 0x3021
+
+/*
+ * Transport Layer Attributes
+ */
+#define T_NUMCPORTS 0x4000
+#define T_NUMTESTFEATURES 0x4001
+#define T_CONNECTIONSTATE 0x4020
+#define T_PEERDEVICEID 0x4021
+#define T_PEERCPORTID 0x4022
+#define T_TRAFFICCLASS 0x4023
+#define T_PROTOCOLID 0x4024
+#define T_CPORTFLAGS 0x4025
+#define T_TXTOKENVALUE 0x4026
+#define T_RXTOKENVALUE 0x4027
+#define T_LOCALBUFFERSPACE 0x4028
+#define T_PEERBUFFERSPACE 0x4029
+#define T_CREDITSTOSEND 0x402A
+#define T_CPORTMODE 0x402B
+#define T_TC0TXMAXSDUSIZE 0x4060
+#define T_TC1TXMAXSDUSIZE 0x4061
+
+#ifdef FALSE
+#undef FALSE
+#endif
+
+#ifdef TRUE
+#undef TRUE
+#endif
+
+/* Boolean attribute values */
+enum {
+ FALSE = 0,
+ TRUE,
+};
+
+#endif /* _UNIPRO_H_ */
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index f7f323752c..0c563d898b 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -102,6 +102,7 @@ enum uclass_id {
UCLASS_THERMAL, /* Thermal sensor */
UCLASS_TIMER, /* Timer device */
UCLASS_TPM, /* Trusted Platform Module TIS interface */
+ UCLASS_UFS, /* Universal Flash Storage */
UCLASS_USB, /* USB bus */
UCLASS_USB_DEV_GENERIC, /* USB generic device */
UCLASS_USB_HUB, /* USB hub */
diff --git a/include/ufs.h b/include/ufs.h
new file mode 100644
index 0000000000..0592a763dd
--- /dev/null
+++ b/include/ufs.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef _UFS_H
+#define _UFS_H
+/**
+ * ufs_probe() - initialize all devices in the UFS uclass
+ *
+ * @return 0 if Ok, -ve on error
+ */
+int ufs_probe(void);
+
+/**
+ * ufs_probe_dev() - initialize a particular device in the UFS uclass
+ *
+ * @index: index in the uclass sequence
+ *
+ * @return 0 if successfully probed, -ve on error
+ */
+int ufs_probe_dev(int index);
+
+/*
+ * ufs_scsi_bind() - Create a new scsi device as a child of the UFS device and
+ * bind it to the ufs_scsi driver
+ * @ufs_dev: UFS device
+ * @scsi_devp: Pointer to scsi device
+ *
+ * @return 0 if Ok, -ve on error
+ */
+int ufs_scsi_bind(struct udevice *ufs_dev, struct udevice **scsi_devp);
+#endif
--
2.19.2
More information about the U-Boot
mailing list