[U-Boot] [PATCH v2 6/9] mpc85xx, socrates: disable VIDEO
Heiko Schocher
hs at denx.de
Wed Oct 16 03:55:51 UTC 2019
disable video, as not really needed longer.
Signed-off-by: Heiko Schocher <hs at denx.de>
---
Changes in v2: None
board/socrates/socrates.c | 180 +------------------------------------
configs/socrates_defconfig | 3 -
include/configs/socrates.h | 15 ----
3 files changed, 2 insertions(+), 196 deletions(-)
diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index 8f9583360b..f51b0203f7 100644
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -231,6 +231,7 @@ int ft_board_setup(void *blob, bd_t *bd)
val[i++] = gd->bd->bi_flashstart;
val[i++] = gd->bd->bi_flashsize;
+#if defined(CONFIG_VIDEO_MB862xx)
if (mb862xx.frameAdrs == CONFIG_SYS_LIME_BASE) {
/* Fixup LIME mapping */
val[i++] = 2; /* chip select number */
@@ -238,6 +239,7 @@ int ft_board_setup(void *blob, bd_t *bd)
val[i++] = CONFIG_SYS_LIME_BASE;
val[i++] = CONFIG_SYS_LIME_SIZE;
}
+#endif
/* Fixup FPGA mapping */
val[i++] = 3; /* chip select number */
@@ -255,184 +257,6 @@ int ft_board_setup(void *blob, bd_t *bd)
}
#endif /* CONFIG_OF_BOARD_SETUP */
-#define DEFAULT_BRIGHTNESS 25
-#define BACKLIGHT_ENABLE (1 << 31)
-
-static const gdc_regs init_regs [] =
-{
- {0x0100, 0x00010f00},
- {0x0020, 0x801901df},
- {0x0024, 0x00000000},
- {0x0028, 0x00000000},
- {0x002c, 0x00000000},
- {0x0110, 0x00000000},
- {0x0114, 0x00000000},
- {0x0118, 0x01df0320},
- {0x0004, 0x041f0000},
- {0x0008, 0x031f031f},
- {0x000c, 0x017f0349},
- {0x0010, 0x020c0000},
- {0x0014, 0x01df01e9},
- {0x0018, 0x00000000},
- {0x001c, 0x01e00320},
- {0x0100, 0x80010f00},
- {0x0, 0x0}
-};
-
-const gdc_regs *board_get_regs (void)
-{
- return init_regs;
-}
-
-int lime_probe(void)
-{
- uint cfg_br2;
- uint cfg_or2;
- int type;
-
- cfg_br2 = get_lbc_br(2);
- cfg_or2 = get_lbc_or(2);
-
- /* Configure GPCM for CS2 */
- set_lbc_br(2, 0);
- set_lbc_or(2, 0xfc000410);
- set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901);
-
- /* Get controller type */
- type = mb862xx_probe(CONFIG_SYS_LIME_BASE);
-
- /* Restore previous CS2 configuration */
- set_lbc_br(2, 0);
- set_lbc_or(2, cfg_or2);
- set_lbc_br(2, cfg_br2);
-
- return (type == MB862XX_TYPE_LIME) ? 1 : 0;
-}
-
-/* Returns Lime base address */
-unsigned int board_video_init (void)
-{
- if (!lime_probe())
- return 0;
-
- mb862xx.winSizeX = 800;
- mb862xx.winSizeY = 480;
- mb862xx.gdfIndex = GDF_15BIT_555RGB;
- mb862xx.gdfBytesPP = 2;
-
- return CONFIG_SYS_LIME_BASE;
-}
-
-#define W83782D_REG_CFG 0x40
-#define W83782D_REG_BANK_SEL 0x4e
-#define W83782D_REG_ADCCLK 0x4b
-#define W83782D_REG_BEEP_CTRL 0x4d
-#define W83782D_REG_BEEP_CTRL2 0x57
-#define W83782D_REG_PWMOUT1 0x5b
-#define W83782D_REG_VBAT 0x5d
-
-static int w83782d_hwmon_init(void)
-{
- u8 buf;
-
- if (i2c_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG, 1, &buf, 1))
- return -1;
-
- i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG, 0x80);
- i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BANK_SEL, 0);
- i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_ADCCLK, 0x40);
-
- buf = i2c_reg_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL);
- i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL,
- buf | 0x80);
- i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL2, 0);
- i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_PWMOUT1, 0x47);
- i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_VBAT, 0x01);
-
- buf = i2c_reg_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG);
- i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG,
- (buf & 0xf4) | 0x01);
- return 0;
-}
-
-static void board_backlight_brightness(int br)
-{
- u32 reg;
- u8 buf;
- u8 old_buf;
-
- /* Select bank 0 */
- if (i2c_read(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
- goto err;
- else
- buf = old_buf & 0xf8;
-
- if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &buf, 1))
- goto err;
-
- if (br > 0) {
- /* PWMOUT1 duty cycle ctrl */
- buf = 255 / (100 / br);
- if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
- goto err;
-
- /* LEDs on */
- reg = in_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c));
- if (!(reg & BACKLIGHT_ENABLE))
- out_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c),
- reg | BACKLIGHT_ENABLE);
- } else {
- buf = 0;
- if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
- goto err;
-
- /* LEDs off */
- reg = in_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c));
- reg &= ~BACKLIGHT_ENABLE;
- out_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c), reg);
- }
- /* Restore previous bank setting */
- if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
- goto err;
-
- return;
-err:
- printf("W83782G I2C access failed\n");
-}
-
-void board_backlight_switch (int flag)
-{
- char * param;
- int rc;
-
- if (w83782d_hwmon_init())
- printf ("hwmon IC init failed\n");
-
- if (flag) {
- param = env_get("brightness");
- rc = param ? simple_strtol(param, NULL, 10) : -1;
- if (rc < 0)
- rc = DEFAULT_BRIGHTNESS;
- } else {
- rc = 0;
- }
- board_backlight_brightness(rc);
-}
-
-#if defined(CONFIG_CONSOLE_EXTRA_INFO)
-/*
- * Return text to be printed besides the logo.
- */
-void video_get_info_str (int line_number, char *info)
-{
- if (line_number == 1) {
- strcpy (info, " Board: Socrates");
- } else {
- info [0] = '\0';
- }
-}
-#endif
-
#if defined(CONFIG_OF_SEPARATE)
void *board_fdt_blob_setup(void)
{
diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig
index 2c87ec5134..be88cefe3e 100644
--- a/configs/socrates_defconfig
+++ b/configs/socrates_defconfig
@@ -27,7 +27,6 @@ CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
-CONFIG_CMD_BMP=y
CONFIG_CMD_DATE=y
# CONFIG_CMD_HASH is not set
CONFIG_CMD_EXT2=y
@@ -50,5 +49,3 @@ CONFIG_USB=y
CONFIG_DM_USB=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_CONSOLE_EXTRA_INFO=y
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 4e10786ed8..c35e8aed77 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -148,21 +148,6 @@
#define CONFIG_SYS_BR2_PRELIM 0xc80018a1 /* UPMB, 32-bit */
#define CONFIG_SYS_OR2_PRELIM 0xfc000000 /* 64 MB */
-#define CONFIG_VIDEO_MB862xx
-#define CONFIG_VIDEO_MB862xx_ACCEL
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define VIDEO_FB_16BPP_PIXEL_SWAP
-#define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
-
-/* SDRAM Clock frequency, 100MHz (0x0000) or 133MHz (0x10000) */
-#define CONFIG_SYS_MB862xx_CCF 0x10000
-/* SDRAM parameter */
-#define CONFIG_SYS_MB862xx_MMR 0x4157BA63
-
/* Serial Port */
#define CONFIG_SYS_NS16550_SERIAL
--
2.21.0
More information about the U-Boot
mailing list