[U-Boot] [PATCH 09/10] imx8m: evk: spl: probe clk in spl early stage

[Peng Fan]

We are going to add i2c pmic support before dram could be used.
So we need enable clk driver earlier, so use spl_early_init
and move clock controller probe eariler to board_init_f.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 board/freescale/imx8mm_evk/spl.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c
index 043b5f4342..2a5fb27a73 100644
--- a/board/freescale/imx8mm_evk/spl.c
+++ b/board/freescale/imx8mm_evk/spl.c
@@ -41,16 +41,7 @@ void spl_dram_init(void)
 
 void spl_board_init(void)
 {
-	struct udevice *dev;
-	int ret;
-
 	puts("Normal Boot\n");
-
-	ret = uclass_get_device_by_name(UCLASS_CLK,
-					"clock-controller at 30380000",
-					&dev);
-	if (ret < 0)
-		printf("Failed to find clock node. Check device tree\n");
 }
 
 #ifdef CONFIG_SPL_LOAD_FIT
@@ -90,6 +81,7 @@ int board_early_init_f(void)
 
 void board_init_f(ulong dummy)
 {
+	struct udevice *dev;
 	int ret;
 
 	arch_cpu_init();
@@ -105,9 +97,17 @@ void board_init_f(ulong dummy)
 	/* Clear the BSS. */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
-	ret = spl_init();
+	ret = spl_early_init();
 	if (ret) {
-		debug("spl_init() failed: %d\n", ret);
+		debug("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+
+	ret = uclass_get_device_by_name(UCLASS_CLK,
+					"clock-controller at 30380000",
+					&dev);
+	if (ret < 0) {
+		printf("Failed to find clock node. Check device tree\n");
 		hang();
 	}
 
-- 
2.16.4