[U-Boot] [PATCH v3 2/5] Makefile: Rename idbloader.img with u-boot-spl-rockchip.bin

[Kever Yang]

Jagan,


On 2019/10/18 上午3:07, Jagan Teki wrote:
> idbloader.img name is specific to rockchip,

This is specific for rockchip, like rksd, rkspi type in mkimage, since 
it's clear for what it stands for,

I think it can also used in U-Boot.

> where it usually
> created using rockchip tools.


No, idbloader stands for the image with idb header packaged with two 
stage loader, eg. TPL+SPL

or ddr.bin+miniloader.bin, and maybe ddr.bin + SPL， TPL+miniloader.bin,

not related to rockchip tools, it can also be created with U-Boot 
mkimage tool.

> Since the image is created as
> per U-Boot generic builds like SPL, better to follow the
> generic U-Boot naming notation like other SoC's following.
>
> Enable idbloader.img with u-boot-spl-rockchip.bin and create
> the same in spl directory since it is SPL file and Makefile.spl
> will clean it by default.
>
> Cc: Kever Yang <kever.yang at rock-chips.com>
> Cc: Matwey V. Kornilov <matwey.kornilov at gmail.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>   Makefile | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index ec55e0f6a4..918b5d53e0 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -887,7 +887,7 @@ ALL-y += u-boot-with-dtb.bin
>   endif
>   
>   ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
> -ALL-y += idbloader.img
> +ALL-y += spl/u-boot-spl-rockchip.bin


This idbloader including IDB header, TPL, and SPL, I don't think name it 
as spl and

put it in spl directory make any sense.

I though the origin output file use postfix '.bin' and those image after 
pack and can  be

dd to storage directly better to use postfix '.img'.

About the clean, it will be better to be clean like other '.img' file in 
the Makefile.


Thanks,

- Kever

>   endif
>   
>   LDFLAGS_u-boot += $(LDFLAGS_FINAL)
> @@ -1344,7 +1344,7 @@ endif
>   MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
>   tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
>   	$(call if_changed,mkimage)
> -idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
> +spl/u-boot-spl-rockchip.bin: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
>   	$(call if_changed,cat)
>   endif
>