[U-Boot] Enable USB host controller on Odroid-C2

[Neil Armstrong]

On 28/08/2019 10:22, Neil Armstrong wrote:
> On 18/08/2019 15:42, Beniamino Galvani wrote:
>> Hi,
>>
>> these two patches enable the USB host controller on Odroid-C2. The
>> first patch adds a PHY driver; the second one enables the necessary
>> configuration options and updates the device tree.
>>
>> Note that the DWC2 driver currently does not support enabling PHYs
>> from the device tree and so the following series (still on review) is
>> needed as runtime requirement for the second patch:
>>
>>  [PATCH 0/5] usb: host: dwc2: use driver model for PHY and CLOCK
> 
> 
> Pushed to my u-boot-amlogic-next test tree until this dependency is applied.

The resend version had some comments, could you resent when Patrick sends an
updated version ?

Neil

> 
> Thanks,
> Neil
> 
>>
>> Thanks,
>> Beniamino
>>
>> Beniamino Galvani (2):
>>   phy: meson: add GXBB PHY driver
>>   odroid-c2: enable USB host controller
>>
>>  arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi |   8 +
>>  configs/odroid-c2_defconfig                  |   7 +
>>  drivers/phy/Kconfig                          |   8 +
>>  drivers/phy/Makefile                         |   1 +
>>  drivers/phy/meson-gxbb-usb2.c                | 235 +++++++++++++++++++
>>  include/configs/meson64.h                    |   5 +
>>  6 files changed, 264 insertions(+)
>>  create mode 100644 drivers/phy/meson-gxbb-usb2.c
>>
>