[U-Boot] [PATCH v3 065/108] x86: Disable microcode section for FSP2

[Simon Glass]

At present we don't support loading microcode with FSP2. The correct way
to do this is by adding it to the FIT. For now, disable including
microcode in the image.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3:
- Drop unnecessary #else part of CONFIG_HAVE_MICROCODE

Changes in v2: None

 arch/x86/Kconfig         | 4 ++++
 arch/x86/dts/u-boot.dtsi | 7 +++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 69327bd746a..37e94d8913a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -598,6 +598,10 @@ config HAVE_REFCODE
           broadwell) U-Boot will be missing some critical setup steps.
           Various peripherals may fail to work.
 
+config HAVE_MICROCODE
+	bool
+	default y if !FSP_VERSION2
+
 config SMP
 	bool "Enable Symmetric Multiprocessing"
 	default n
diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi
index 049f47c9ffd..aaca8874540 100644
--- a/arch/x86/dts/u-boot.dtsi
+++ b/arch/x86/dts/u-boot.dtsi
@@ -37,11 +37,13 @@
 	};
 #endif
 #ifdef CONFIG_TPL
+#ifdef CONFIG_HAVE_MICROCODE
 	u-boot-tpl-with-ucode-ptr {
 		offset = <CONFIG_TPL_TEXT_BASE>;
 	};
 	u-boot-tpl-dtb {
 	};
+#endif
 	u-boot-spl {
 		offset = <CONFIG_SPL_TEXT_BASE>;
 	};
@@ -77,11 +79,16 @@
 		offset = <CONFIG_SYS_TEXT_BASE>;
 	};
 #endif
+#ifdef CONFIG_HAVE_MICROCODE
 	u-boot-dtb-with-ucode {
 	};
 	u-boot-ucode {
 		align = <16>;
 	};
+#else
+	u-boot-dtb {
+	};
+#endif
 #ifdef CONFIG_X86_HAS_FIT
 	intel-fit {
 	};
-- 
2.23.0.866.gb869b98d4c-goog