[U-Boot] [PATCH v3 074/108] spi: Correct operations check in dm_spi_xfer()

Simon Glass sjg at chromium.org
Mon Oct 21 03:38:39 UTC 2019


At present we have to have an xfer() method even if it does nothing. This
is not correct, so fix it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3: None
Changes in v2: None

 drivers/spi/ich.c        | 9 +--------
 drivers/spi/spi-uclass.c | 5 ++++-
 include/spi.h            | 2 +-
 3 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index fbb58c783ec..a4e4ad55c69 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -493,13 +493,6 @@ static int ich_spi_adjust_size(struct spi_slave *slave, struct spi_mem_op *op)
 	return 0;
 }
 
-static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen,
-			const void *dout, void *din, unsigned long flags)
-{
-	printf("ICH SPI: Only supports memory operations\n");
-	return -1;
-}
-
 static int ich_spi_probe(struct udevice *dev)
 {
 	struct ich_spi_platdata *plat = dev_get_platdata(dev);
@@ -612,7 +605,7 @@ static const struct spi_controller_mem_ops ich_controller_mem_ops = {
 };
 
 static const struct dm_spi_ops ich_spi_ops = {
-	.xfer		= ich_spi_xfer,
+	/* xfer is not supported */
 	.set_speed	= ich_spi_set_speed,
 	.set_mode	= ich_spi_set_mode,
 	.mem_ops	= &ich_controller_mem_ops,
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index 9f5ff2a31d1..7535d547f25 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -85,11 +85,14 @@ int dm_spi_xfer(struct udevice *dev, unsigned int bitlen,
 		const void *dout, void *din, unsigned long flags)
 {
 	struct udevice *bus = dev->parent;
+	struct dm_spi_ops *ops = spi_get_ops(bus);
 
 	if (bus->uclass->uc_drv->id != UCLASS_SPI)
 		return -EOPNOTSUPP;
+	if (!ops->xfer)
+		return -ENOSYS;
 
-	return spi_get_ops(bus)->xfer(dev, bitlen, dout, din, flags);
+	return ops->xfer(dev, bitlen, dout, din, flags);
 }
 
 int dm_spi_get_mmap(struct udevice *dev, ulong *map_basep, uint *map_sizep,
diff --git a/include/spi.h b/include/spi.h
index a12727e6361..9f005d5efe8 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -224,7 +224,7 @@ void spi_release_bus(struct spi_slave *slave);
 int spi_set_wordlen(struct spi_slave *slave, unsigned int wordlen);
 
 /**
- * SPI transfer
+ * SPI transfer (optional if mem_ops is used)
  *
  * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks
  * "bitlen" bits in the SPI MISO port.  That's just the way SPI works.
-- 
2.23.0.866.gb869b98d4c-goog



More information about the U-Boot mailing list