[U-Boot] [PATCH v3 088/108] mtd: spi: Export spi_flash_std_probe()

[Simon Glass]

With of-platdata we need to create drivers for particular chips, or at
least drivers that are separate from the standard code, since C structures
are created by dtoc which are private to that driver.

To avoid duplicating the probing code, export this probe function for use
by these drivers.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3: None
Changes in v2: None

 drivers/mtd/spi/sf_probe.c |  2 +-
 include/spi_flash.h        | 12 ++++++++++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 73297e1a0a5..755aba27116 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -137,7 +137,7 @@ static int spi_flash_std_get_sw_write_prot(struct udevice *dev)
 	return spi_flash_cmd_get_sw_write_prot(flash);
 }
 
-static int spi_flash_std_probe(struct udevice *dev)
+int spi_flash_std_probe(struct udevice *dev)
 {
 	struct spi_slave *slave = dev_get_parent_priv(dev);
 	struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
diff --git a/include/spi_flash.h b/include/spi_flash.h
index 55b4721813a..0b23f57a71b 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -102,6 +102,18 @@ int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len);
  */
 int spl_flash_get_sw_write_prot(struct udevice *dev);
 
+/**
+ * spi_flash_std_probe() - Probe a SPI flash device
+ *
+ * This is the standard internal method for probing a SPI flash device to
+ * determine its type. It can be used in chip-specific drivers which need to
+ * do this, typically with of-platdata
+ *
+ * @dev: SPI-flash device to probe
+ * @return 0 if OK, -ve on error
+ */
+int spi_flash_std_probe(struct udevice *dev);
+
 int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
 			   unsigned int max_hz, unsigned int spi_mode,
 			   struct udevice **devp);
-- 
2.23.0.866.gb869b98d4c-goog