[U-Boot] [PATCH v2 3/5] mmc: mtk-sd: Adjust the mmc tuning flow
mingming lee
mingming.lee at mediatek.com
Mon Oct 21 06:59:06 UTC 2019
1.Support cmd response and data tuning together.
2.Support hs400 cmd responese tuning.
Signed-off-by: mingming lee <mingming.lee at mediatek.com>
---
Changes for v2:
- add hs400 support
---
drivers/mmc/mtk-sd.c | 209 +++++++++++++++++++++++++++++++++++++++----
1 file changed, 193 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
index f555357af2..0b3eeeaa20 100644
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
@@ -125,6 +125,9 @@
#define MSDC_PAD_TUNE_DATWRDLY_M 0x1f
#define MSDC_PAD_TUNE_DATWRDLY_S 0
+#define PAD_CMD_TUNE_RX_DLY3 0x3E
+#define PAD_CMD_TUNE_RX_DLY3_S 1
+
/* EMMC50_CFG0 */
#define EMMC50_CFG_CFCSTS_SEL BIT(4)
@@ -209,7 +212,8 @@ struct mtk_sd_regs {
u32 eco_ver;
u32 reserved6[27];
u32 pad_ds_tune;
- u32 reserved7[31];
+ u32 pad_cmd_tune;
+ u32 reserved7[30];
u32 emmc50_cfg0;
u32 reserved8[7];
u32 sdc_fifo_cfg;
@@ -239,6 +243,7 @@ struct msdc_plat {
struct msdc_tune_para {
u32 iocon;
u32 pad_tune;
+ u32 pad_cmd_tune;
};
struct msdc_host {
@@ -362,6 +367,8 @@ static u32 msdc_cmd_prepare_raw_cmd(struct msdc_host *host,
case MMC_CMD_WRITE_SINGLE_BLOCK:
case MMC_CMD_READ_SINGLE_BLOCK:
case SD_CMD_APP_SEND_SCR:
+ case MMC_CMD_SEND_TUNING_BLOCK:
+ case MMC_CMD_SEND_TUNING_BLOCK_HS200:
dtype = 1;
break;
case SD_CMD_SWITCH_FUNC: /* same as MMC_CMD_SWITCH */
@@ -467,6 +474,14 @@ static int msdc_start_command(struct msdc_host *host, struct mmc_cmd *cmd,
if (!msdc_cmd_is_ready(host))
return -EIO;
+ if ((readl(&host->base->msdc_fifocs) &
+ MSDC_FIFOCS_TXCNT_M) >> MSDC_FIFOCS_TXCNT_S ||
+ (readl(&host->base->msdc_fifocs) &
+ MSDC_FIFOCS_RXCNT_M) >> MSDC_FIFOCS_RXCNT_S) {
+ pr_err("TX/RX FIFO non-empty before start of IO. Reset\n");
+ msdc_reset_hw(host);
+ }
+
msdc_fifo_clr(host);
host->last_resp_type = cmd->resp_type;
@@ -650,14 +665,22 @@ static int msdc_ops_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
struct mmc_data *data)
{
struct msdc_host *host = dev_get_priv(dev);
- int ret;
+ int cmd_ret, data_ret;
- ret = msdc_start_command(host, cmd, data);
- if (ret)
- return ret;
+ cmd_ret = msdc_start_command(host, cmd, data);
+ if (cmd_ret &&
+ !(cmd_ret == -EIO &&
+ (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
+ cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)))
+ return cmd_ret;
- if (data)
- return msdc_start_data(host, data);
+ if (data) {
+ data_ret = msdc_start_data(host, data);
+ if (cmd_ret)
+ return cmd_ret;
+ else
+ return data_ret;
+ }
return 0;
}
@@ -936,6 +959,56 @@ static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
return delay_phase;
}
+static int hs400_tune_response(struct udevice *dev, u32 opcode)
+{
+ struct msdc_plat *plat = dev_get_platdata(dev);
+ struct msdc_host *host = dev_get_priv(dev);
+ struct mmc *mmc = &plat->mmc;
+ u32 cmd_delay = 0;
+ struct msdc_delay_phase final_cmd_delay = { 0, };
+ u8 final_delay;
+ void __iomem *tune_reg = &host->base->pad_cmd_tune;
+ int cmd_err;
+ int i, j;
+
+ setbits_le32(&host->base->pad_cmd_tune, BIT(0));
+
+ if (mmc->selected_mode == MMC_HS_200 ||
+ mmc->selected_mode == UHS_SDR104)
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M,
+ host->hs200_cmd_int_delay <<
+ MSDC_PAD_TUNE_CMDRRDLY_S);
+
+ if (host->r_smpl)
+ clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
+ else
+ setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
+
+ for (i = 0; i < PAD_DELAY_MAX; i++) {
+ clrsetbits_le32(tune_reg, PAD_CMD_TUNE_RX_DLY3,
+ i << PAD_CMD_TUNE_RX_DLY3_S);
+
+ for (j = 0; j < 3; j++) {
+ mmc_send_tuning(mmc, opcode, &cmd_err);
+ if (!cmd_err) {
+ cmd_delay |= (1 << i);
+ } else {
+ cmd_delay &= ~(1 << i);
+ break;
+ }
+ }
+ }
+
+ final_cmd_delay = get_best_delay(host, cmd_delay);
+ clrsetbits_le32(tune_reg, PAD_CMD_TUNE_RX_DLY3,
+ final_cmd_delay.final_phase <<
+ PAD_CMD_TUNE_RX_DLY3_S);
+ final_delay = final_cmd_delay.final_phase;
+
+ dev_err(dev, "Final cmd pad delay: %x\n", final_delay);
+ return final_delay == 0xff ? -EIO : 0;
+}
+
static int msdc_tune_response(struct udevice *dev, u32 opcode)
{
struct msdc_plat *plat = dev_get_platdata(dev);
@@ -1127,34 +1200,138 @@ skip_fall:
return final_delay == 0xff ? -EIO : 0;
}
+/*
+ * MSDC IP which supports data tune + async fifo can do CMD/DAT tune
+ * together, which can save the tuning time.
+ */
+static int msdc_tune_together(struct udevice *dev, u32 opcode)
+{
+ struct msdc_plat *plat = dev_get_platdata(dev);
+ struct msdc_host *host = dev_get_priv(dev);
+ struct mmc *mmc = &plat->mmc;
+ u32 rise_delay = 0, fall_delay = 0;
+ struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0, };
+ u8 final_delay, final_maxlen;
+ void __iomem *tune_reg = &host->base->pad_tune;
+ int i, ret;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = &host->base->pad_tune0;
+
+ clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
+ clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
+
+ for (i = 0; i < PAD_DELAY_MAX; i++) {
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
+ i << MSDC_PAD_TUNE_CMDRDLY_S);
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
+ i << MSDC_PAD_TUNE_DATRRDLY_S);
+
+ ret = mmc_send_tuning(mmc, opcode, NULL);
+ if (!ret)
+ rise_delay |= (1 << i);
+ }
+
+ final_rise_delay = get_best_delay(host, rise_delay);
+ if (final_rise_delay.maxlen >= 12 ||
+ (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
+ goto skip_fall;
+
+ setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
+ setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
+
+ for (i = 0; i < PAD_DELAY_MAX; i++) {
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
+ i << MSDC_PAD_TUNE_CMDRDLY_S);
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
+ i << MSDC_PAD_TUNE_DATRRDLY_S);
+
+ ret = mmc_send_tuning(mmc, opcode, NULL);
+ if (!ret)
+ fall_delay |= (1 << i);
+ }
+
+ final_fall_delay = get_best_delay(host, fall_delay);
+
+skip_fall:
+ final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
+ if (final_maxlen == final_rise_delay.maxlen) {
+ clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
+ clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
+ final_rise_delay.final_phase <<
+ MSDC_PAD_TUNE_CMDRDLY_S);
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
+ final_rise_delay.final_phase <<
+ MSDC_PAD_TUNE_DATRRDLY_S);
+ final_delay = final_rise_delay.final_phase;
+ } else {
+ setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
+ setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
+ final_fall_delay.final_phase <<
+ MSDC_PAD_TUNE_CMDRDLY_S);
+ clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
+ final_fall_delay.final_phase <<
+ MSDC_PAD_TUNE_DATRRDLY_S);
+ final_delay = final_fall_delay.final_phase;
+ }
+
+ dev_err(dev, "Final pad delay: %x\n", final_delay);
+
+ return final_delay == 0xff ? -EIO : 0;
+}
+
static int msdc_execute_tuning(struct udevice *dev, uint opcode)
{
struct msdc_plat *plat = dev_get_platdata(dev);
struct msdc_host *host = dev_get_priv(dev);
struct mmc *mmc = &plat->mmc;
- int ret;
+ int ret = 0;
+
+ if (host->dev_comp->data_tune && host->dev_comp->async_fifo) {
+ ret = msdc_tune_together(dev, opcode);
+ if (ret == -EIO) {
+ dev_err(dev, "Tune fail!\n");
+ return ret;
+ }
- if (mmc->selected_mode == MMC_HS_400) {
- writel(host->hs400_ds_delay, &host->base->pad_ds_tune);
- /* for hs400 mode it must be set to 0 */
- clrbits_le32(&host->base->patch_bit2, MSDC_PB2_CFGCRCSTS);
- host->hs400_mode = true;
+ if (mmc->selected_mode == MMC_HS_400) {
+ clrbits_le32(&host->base->msdc_iocon,
+ MSDC_IOCON_DSPL | MSDC_IOCON_W_DSPL);
+ clrsetbits_le32(&host->base->pad_tune,
+ MSDC_PAD_TUNE_DATRRDLY_M, 0);
+
+ writel(host->hs400_ds_delay, &host->base->pad_ds_tune);
+ /* for hs400 mode it must be set to 0 */
+ clrbits_le32(&host->base->patch_bit2,
+ MSDC_PB2_CFGCRCSTS);
+ host->hs400_mode = true;
+ }
+ goto tune_done;
}
- ret = msdc_tune_response(dev, opcode);
+ if (mmc->selected_mode == MMC_HS_400)
+ ret = hs400_tune_response(dev, opcode);
+ else
+ ret = msdc_tune_response(dev, opcode);
if (ret == -EIO) {
dev_err(dev, "Tune response fail!\n");
return ret;
}
- if (!host->hs400_mode) {
+ if (mmc->selected_mode != MMC_HS_400) {
ret = msdc_tune_data(dev, opcode);
- if (ret == -EIO)
+ if (ret == -EIO) {
dev_err(dev, "Tune data fail!\n");
+ return ret;
+ }
}
+tune_done:
host->saved_tune_para.iocon = readl(&host->base->msdc_iocon);
host->saved_tune_para.pad_tune = readl(&host->base->pad_tune);
+ host->saved_tune_para.pad_cmd_tune = readl(&host->base->pad_cmd_tune);
return ret;
}
--
2.23.0
More information about the U-Boot
mailing list