[U-Boot] [PATCH v2 2/3] opos6uldev: migrate to DM_VIDEO
Sébastien Szymanski
sebastien.szymanski at armadeus.com
Mon Oct 21 13:33:03 UTC 2019
Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.
Reviewed-by: Peng Fan <peng.fan at nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski at armadeus.com>
---
Changes for v2:
- added Reviewed-by tag
arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi | 10 ++++++
arch/arm/dts/imx6ul-opos6uldev.dts | 4 +--
board/armadeus/opos6uldev/board.c | 36 ----------------------
configs/opos6uldev_defconfig | 3 +-
include/configs/opos6uldev.h | 6 +++-
5 files changed, 19 insertions(+), 40 deletions(-)
diff --git a/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi b/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
index da8b0392ef..3f351ef0c4 100644
--- a/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
+++ b/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
@@ -7,6 +7,12 @@
#include "imx6ul-opos6ul-u-boot.dtsi"
+/ {
+ aliases {
+ display0 = &lcdif;
+ };
+};
+
&aips1 {
u-boot,dm-spl;
@@ -15,6 +21,10 @@
};
};
+&lcdif {
+ u-boot,dm-pre-proper;
+};
+
&pinctrl_uart1 {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imx6ul-opos6uldev.dts b/arch/arm/dts/imx6ul-opos6uldev.dts
index 0e59ee57fd..4a541be6b0 100644
--- a/arch/arm/dts/imx6ul-opos6uldev.dts
+++ b/arch/arm/dts/imx6ul-opos6uldev.dts
@@ -187,7 +187,7 @@
status = "okay";
display0: display0 {
- bits-per-pixel = <32>;
+ bits-per-pixel = <18>;
bus-width = <18>;
display-timings {
@@ -202,7 +202,7 @@
hsync-len = <64>;
vsync-len = <4>;
de-active = <1>;
- pixelclk-active = <0>;
+ pixelclk-active = <1>;
};
};
};
diff --git a/board/armadeus/opos6uldev/board.c b/board/armadeus/opos6uldev/board.c
index cbf40d5c4a..ade155c5ad 100644
--- a/board/armadeus/opos6uldev/board.c
+++ b/board/armadeus/opos6uldev/board.c
@@ -3,53 +3,17 @@
* Copyright (C) 2018 Armadeus Systems
*/
-#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
#include <asm/io.h>
#include <common.h>
#ifdef CONFIG_VIDEO_MXS
-#define LCD_PAD_CTRL ( \
- PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
- PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm \
-)
-
-static iomux_v3_cfg_t const lcd_pads[] = {
- MX6_PAD_LCD_CLK__LCDIF_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_ENABLE__LCDIF_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_HSYNC__LCDIF_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_VSYNC__LCDIF_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA00__LCDIF_DATA00 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA01__LCDIF_DATA01 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA02__LCDIF_DATA02 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA03__LCDIF_DATA03 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA04__LCDIF_DATA04 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA05__LCDIF_DATA05 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA06__LCDIF_DATA06 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA07__LCDIF_DATA07 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA08__LCDIF_DATA08 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA09__LCDIF_DATA09 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA10__LCDIF_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA11__LCDIF_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA12__LCDIF_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA13__LCDIF_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA14__LCDIF_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA15__LCDIF_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA16__LCDIF_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA17__LCDIF_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
-
- MX6_PAD_NAND_ALE__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)
-};
-
int setup_lcd(void)
{
struct gpio_desc backlight;
int ret;
- imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-
/* Set Brightness to high */
ret = dm_gpio_lookup_name("GPIO4_10", &backlight);
if (ret) {
diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig
index 44236e99bc..352d10a0d8 100644
--- a/configs/opos6uldev_defconfig
+++ b/configs/opos6uldev_defconfig
@@ -95,6 +95,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_VIDEO=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h
index b10071eaaf..11face21a1 100644
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -43,7 +43,7 @@
/* LCD */
#ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
@@ -51,6 +51,8 @@
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_BMP_16BPP
+#define CONFIG_BMP_24BPP
+#define CONFIG_BMP_32BPP
#define CONFIG_VIDEO_MXS
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
#endif
@@ -87,6 +89,8 @@
"mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
"kernelimg=" __stringify(CONFIG_BOARD_NAME) "-linux.bin\0" \
+ "splashpos=0,0\0" \
+ "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
"videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \
"check_env=if test -n ${flash_env_version}; " \
"then env default env_version; " \
--
2.21.0
More information about the U-Boot
mailing list