[U-Boot] [PATCH 5/7] mx7ulp: Allow setting a lower DDR frequency

[Fabio Estevam]

By default the i.MX7ULP DDR frequency runs at 352 MHz, but not all
i.MX7ULP based systems are able to run at such frequency, such as
the i.MX7ULP Embedded Artists board.

Introduce a CONFIG_IMX7ULP_LOWER_DDR_FREQUENCY option that
allows running DDR at a lower frequency of 316.8MHz.

When such option is not selected DDR will run at the default 352MHz
frequency.

Suggested-by: Bogdan Petru Chircu Mare <bogdan-petru.chircu-mare at nxp.com>
Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
 arch/arm/mach-imx/Kconfig        |  7 +++++++
 arch/arm/mach-imx/mx7ulp/clock.c | 27 +++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index b0b9d2c070..bb79734738 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -89,6 +89,13 @@ config CMD_NANDBCB
 	  This is similar to kobs-ng, which is used in Linux as separate
 	  rootfs package.
 
+config IMX7ULP_LOWER_DDR_FREQUENCY
+	bool "Use lower DDR Frequency for i.MX7ULP"
+	depends on ARCH_MX7ULP
+	help
+	  Some systems can not run DDR frequency at 352MHz, so select
+	  this option to run DDR frequency at 316.8MHz instead
+
 config NXP_BOARD_REVISION
 	bool "Read NXP board revision from fuses"
 	depends on ARCH_MX6 || ARCH_MX7
diff --git a/arch/arm/mach-imx/mx7ulp/clock.c b/arch/arm/mach-imx/mx7ulp/clock.c
index d3365dd411..c26dbd3781 100644
--- a/arch/arm/mach-imx/mx7ulp/clock.c
+++ b/arch/arm/mach-imx/mx7ulp/clock.c
@@ -274,6 +274,31 @@ static void init_clk_rgpio2p(void)
 	writel(PCC_CGC_MASK, (PCC0_RBASE + 0x3C));
 }
 
+/*
+ * Default PFD0 divide is 27, which generates:
+ * PFD0 Freq = A7 APLL(528MHz) * 18 / 27 = 352MHz
+ *
+ * As some systems can not run DDR at 352MHz, use a
+ * divider of 30, which gives:
+ *
+ * PFD0 Freq = A7 APLL(528MHz) * 18 / 30 = 316.8MHz
+ */
+#define SCG1_APLL_PFD0_FRAC_NUM		30
+static void scg_a7_apll_update_pfd0(void)
+{
+	scg_p scg1_regs = (scg_p)SCG1_RBASE;
+	u32 val;
+
+	if (!IS_ENABLED(CONFIG_IMX7ULP_LOWER_DDR_FREQUENCY))
+		return;
+
+	/* Configure A7 APLL PFD0 */
+	val = readl(&scg1_regs->apllpfd);
+	val &= ~SCG_PLL_PFD0_FRAC_MASK;
+	val |= SCG1_APLL_PFD0_FRAC_NUM;
+	writel(val, &scg1_regs->apllpfd);
+}
+
 /* Configure PLL/PFD freq */
 void clock_init(void)
 {
@@ -300,6 +325,8 @@ void clock_init(void)
 
 	scg_a7_soscdiv_init();
 
+	scg_a7_apll_update_pfd0();
+
 	scg_a7_init_core_clk();
 
 	/* APLL PFD1 = 270Mhz, PFD2=345.6Mhz, PFD3=800Mhz */
-- 
2.17.1