[U-Boot] [EXT] Re: Issues with driver binding and probing
Aaron Williams
awilliams at marvell.com
Mon Oct 21 19:26:45 UTC 2019
Hi Simon,
________________________________
From: Simon Glass <sjg at chromium.org>
Sent: Friday, October 11, 2019 4:42 PM
To: Aaron Williams <awilliams at marvell.com>
Cc: Bin Meng <bmeng.cn at gmail.com>; u-boot at lists.denx.de <u-boot at lists.denx.de>
Subject: Re: [EXT] Re: [U-Boot] Issues with driver binding and probing
Hi Aaron,
On Wed, 25 Sep 2019 at 22:08, Aaron Williams <awilliams at marvell.com> wrote:
>
> Hi Simon,
>
> On Wednesday, September 25, 2019 8:40:48 PM PDT Bin Meng wrote:
> > External Email
> >
> > ----------------------------------------------------------------------
> > +Simon
> >
> > Hi Aaron,
> >
> > On Thu, Sep 26, 2019 at 11:10 AM Aaron Williams <awilliams at marvell.com>
> wrote:
> > > Hi all,
> > >
> > > I have an issue where I have a nexus driver and a sub serial driver on top
> > > of it. The base nexus driver is getting bound and probed properly,
> > > however the serial drivers (pci-console) below it are not.
> > >
> > > My device tree looks something like this:
> > > pci-console-nexus at 0x03000000 {
> > >
> > > /* Remote PCI console buffer location */
> > > compatible = "marvell,pci-console-nexus";
> >
> > Is this a PCI controller node?
> >
> No, actually it points to a location in memory which is shared by a PCI host
> with the software. It is a software only structure with no actual hardware
> behind it. We use this as a serial console across the PCI bus, but it's just
> shared memory. There is a nexus device then multiple consoles underneath it.
> U-Boot will initialize the data structures (if needed) and claim one of the
> consoles while it is use. The data structures may or may not already be
> initialized by earlier bootloaders or the ATF. The ATF may also claim one of
> the consoles.
What uclass is this node? Does that uclass have a post_bind method
that calls dm_scan_fdt_dev()?
The console is uclass-serial. I'm actually calling dm_scan_fdt_dev() in the bind method. I will move it to a post-bind method.
>
> > > status = "okay";
> > > #address-cells = <2>;
> > > #size-cells = <1>;
> > > skip-init;
> > > num-consoles = <8>;
> > > reg = <0 0x03000000 0 0x40000>;
> > > ranges = <0 0 0 0x3000100 0x4000>,
> > >
> > > <1 0 0 0x3004100 0x4000>,
> > > <2 0 0 0x3008100 0x4000>,
> > > <3 0 0 0x300c100 0x4000>,
> > > <4 0 0 0x3010100 0x4000>,
> > > <5 0 0 0x3014100 0x4000>,
> > > <6 0 0 0x3018100 0x4000>,
> > > <7 0 0 0x301c100 0x4000>;
> > >
> > > console at 0 {
> > >
> > > compatible = "marvell,pci-console";
> >
> > If this is a PCI device, it can be handled by the PCI codes.
> >
> > > status = "okay";
> > > reg = <0 0 0x4000>;
> > > tx-buffer-size = <0x2f80>;
> > > rx-buffer-size = <0x1000>;
> > >
> > > };
> > >
> > > ...
> > >
> > > console at 7 {
> > >
> > > compatible = "marvell,pci-console";
> > > status = "okay";
> > > reg = <7 0 0x4000>;
> > > tx-buffer-size = <0x2f80>;
> > > rx-buffer-size = <0x1000>;
> > >
> > > };
> > >
> > > };
> > >
> > > When U-Boot binds the drivers it sees and binds pci-console-nexus but it
> > > never even attempts to go any deeper in the device tree. Both drivers are
> > > used. The nexus datastructure is a shared resouce that can be used by
> > > ATF.
> > >
> > > I added a bind function in the nexus driver that basically does:
> > > dev_for_each_subnode(node, parent) {
> > >
> > > ret = device_bind_driver_to_node(parent, DRIVER_NAME,
> > >
> > > ofnode_get_name(node), node,
> > > &dev);
> > >
> > > get_uclass(UCLASS_SERIAL, &uc);
> > > dev->uclass = uic;
> > >
> > > }
> > >
> > > With this I see the consoles in the dm tree and uclass list, but the
> > > sequences don't seem to be getting set.
> > >
> > > What I notice when I type dm uclass is:
> > > uclass 60: serial
> > > - * serial at 87e028000000 @ 7fbeb3360, seq 0, (req 0)
> > > - serial at 87e029000000 @ 7fbeb3430, seq -1, (req 1)
> > > - console at 0 @ 7fbeb3660
> > > - console at 1 @ 7fbeb3780
> > > - console at 2 @ 7fbeb38a0
> > > - console at 3 @ 7fbeb39c0
> > > - console at 4 @ 7fbeb3ae0
> > > - console at 5 @ 7fbeb3c00
> > > - console at 6 @ 7fbeb3d20
> > > - console at 7 @ 7fbeb3e40
> > > - * pci-bootcmd at 0x03fff000 @ 7fbeb3f60, seq 1, (req -1)
> > >
> > > Does anyone have any ideas on how I should properly handle this? It seems
> > > that whatever I'm doing is overly complicated and I'm missing something
> > > for the DM layer to not go deeper into the tree past the nexus layer.
> > >
> > > static const struct udevice_id octeontx_pcie_console_nexus_serial_id[] = {
> > >
> > > { .compatible = "marvell,pci-console-nexus", },
> > > { },
> > >
> > > };
> > >
> > > U_BOOT_DRIVER(octeontx_pcie_console_nexus) = {
> > >
> > > .name = DRIVER_NAME "-nexus",
> > > .id = UCLASS_MISC,
> > > .flags = DM_FLAG_PRE_RELOC,
> > > .of_match = of_match_ptr(octeontx_pcie_console_nexus_serial_id),
> > > .ofdata_to_platdata =
> > >
> > > octeontx_pcie_console_nexus_ofdata_to_platdata,
> > >
> > > .platdata_auto_alloc_size =
> > >
> > > sizeof(struct octeontx_pcie_console_plat_data),
> > >
> > > .bind = octeontx_pcie_console_nexus_bind,
> > > .probe = octeontx_pcie_console_nexus_probe,
> > > .priv_auto_alloc_size =
> > >
> > > sizeof(struct octeontx_pcie_console_nexus_priv),
> > >
> > > };
> > >
> > > static const struct dm_serial_ops octeontx_pcie_console_ops = {
> > >
> > > .setbrg = octeontx_pcie_console_setbrg,
> > > .getc = octeontx_pcie_console_getc,
> > > .putc = octeontx_pcie_console_putc,
> > > .pending = octeontx_pcie_console_pending,
> > > .clear = octeontx_pcie_console_clear,
> > >
> > > };
> > >
> > > static const struct udevice_id octeontx_pcie_console_serial_id[] = {
> > >
> > > { .compatible = "marvell,pci-console", },
> > > { },
> > >
> > > };
> > >
> > > U_BOOT_DRIVER(octeontx_pcie_console) = {
> > >
> > > .name = DRIVER_NAME,
> > > .id = UCLASS_SERIAL,
> > > .ops = &octeontx_pcie_console_ops,
> > > .of_match = of_match_ptr(octeontx_pcie_console_serial_id),
> > > .probe = octeontx_pcie_console_probe,
> > > .ofdata_to_platdata = octeontx_pcie_console_ofdata_to_platdata,
> > > .remove = octeontx_pcie_console_remove,
> > > .priv_auto_alloc_size = sizeof(struct octeontx_pcie_console_priv),
> > > .platdata_auto_alloc_size =
> > >
> > > sizeof(struct octeontx_pcie_console_plat_data),
> > >
> > > .flags = DM_FLAG_OS_PREPARE | DM_FLAG_PRE_RELOC,
> > >
> > > };
> >
> > Regards,
> > Bin
>
> Regards,
>
> Aaron
>
>
I'm sorry about the lousy formatting. The Outlook web interface can't handle long email threads and they've blocked my access to IMAP.
Regards,
-Aaron
More information about the U-Boot
mailing list