[U-Boot] [PATCH 3/3] imx8: output SECO-FW, ATF and imx-mkimage commit IDs

[Peng Fan]

Hi Anatolij,

> Subject: [PATCH 3/3] imx8: output SECO-FW, ATF and imx-mkimage commit
> IDs
> 
> Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617)
> and add the commit IDs to the environment.
> 
> Signed-off-by: Anatolij Gustschin <agust at denx.de>
> ---
>  arch/arm/mach-imx/imx8/misc.c | 61
> ++++++++++++++++++++++++++++++++++-
>  1 file changed, 60 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-imx/imx8/misc.c
> b/arch/arm/mach-imx/imx8/misc.c index fe73e29eee..b0693358e7 100644
> --- a/arch/arm/mach-imx/imx8/misc.c
> +++ b/arch/arm/mach-imx/imx8/misc.c
> @@ -1,6 +1,9 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  #include <common.h>
>  #include <asm/arch/sci/sci.h>
> +#include <asm/arch/sys_proto.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> 
>  int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
> { @@ -25,9 +28,28 @@ int sc_pm_setup_uart(sc_rsrc_t uart_rsrc,
> sc_pm_clock_rate_t clk_rate)
>  	return 0;
>  }
> 
> +#define FSL_SIP_BUILDINFO			0xC2000003
> +#define FSL_SIP_BUILDINFO_GET_COMMITHASH	0x00
> +extern uint32_t _end_ofs;
> +
> +static void set_buildinfo_to_env(uint32_t scfw, uint32_t secofw,
> +				 char *mkimage, char *atf)
> +{
> +	if (!mkimage || !atf)
> +		return;
> +
> +	env_set("commit_mkimage", mkimage);
> +	env_set("commit_atf", atf);
> +	env_set_hex("commit_scfw", (ulong)scfw);
> +	env_set_hex("commit_secofw", (ulong)secofw); }
> +
>  void build_info(void)
>  {
> +	u32 seco_build = 0, seco_commit = 0;
>  	u32 sc_build = 0, sc_commit = 0;
> +	ulong atf_commit = 0;
> +	char *mkimage_commit, *temp;
> 
>  	/* Get SCFW build and commit id */
>  	sc_misc_build_info(-1, &sc_build, &sc_commit); @@ -35,5 +57,42 @@
> void build_info(void)
>  		printf("SCFW does not support build info\n");
>  		sc_commit = 0; /* Display 0 if build info not supported */
>  	}
> -	printf("Build: SCFW %x\n", sc_commit);
> +
> +	/* Get SECO FW build and commit id */
> +	sc_misc_seco_build_info(-1, &seco_build, &seco_commit);

Use sc_seco_build_info.

> +	if (!seco_build) {
> +		debug("SECO FW does not support build info\n");
> +		/* Display 0 when the build info is not supported */
> +		seco_commit = 0;
> +	}
> +
> +	/*
> +	 * Get imx-mkimage commit id.
> +	 * The imx-mkimage puts the commit hash behind the end of u-boot.bin
> +	 */
> +	mkimage_commit = (char *)(ulong)(CONFIG_SYS_TEXT_BASE + _end_ofs
> +
> +					 fdt_totalsize(gd->fdt_blob));
> +	temp = mkimage_commit + 8;
> +	*temp = '\0';
> +
> +	if (strlen(mkimage_commit) == 0) {
> +		debug("IMX-MKIMAGE does not support build info\n");
> +		mkimage_commit = "0"; /* Display 0 */
> +	}


We no need imx-mkimage, use mkimage in U-Boot no need this piece code.

Regards,
Peng.

> +
> +	/* Get ARM Trusted Firmware commit id */
> +	atf_commit = call_imx_sip(FSL_SIP_BUILDINFO,
> +				  FSL_SIP_BUILDINFO_GET_COMMITHASH, 0, 0, 0);
> +	if (atf_commit == 0xffffffff) {
> +		debug("ATF does not support build info\n");
> +		atf_commit = 0x30; /* Display 0 */
> +	}
> +
> +	printf("Build: SCFW %08x, SECO-FW %08x\n"
> +	       "       IMX-MKIMAGE %s, ATF %s\n",
> +	       sc_commit, seco_commit, mkimage_commit, (char
> *)&atf_commit);
> +
> +	/* Set all to env */
> +	set_buildinfo_to_env(sc_commit, seco_commit, mkimage_commit,
> +			     (char *)&atf_commit);
>  }
> --
> 2.17.1