[U-Boot] [PATCH v1 2/3] lib: rsa: generate additional parameters for public key

AKASHI Takahiro takahiro.akashi at linaro.org
Wed Oct 23 05:23:14 UTC 2019


On Mon, Oct 21, 2019 at 06:17:03PM -0600, Simon Glass wrote:
> Hi Takahiro,
> 
> On Tue, 8 Oct 2019 at 23:27, AKASHI Takahiro <takahiro.akashi at linaro.org> wrote:
> >
> > In the current implementation of FIT_SIGNATURE, five parameters for
> > a RSA public key are required while only two of them are essential.
> > (See rsa-mod-exp.h and uImage.FIT/signature.txt)
> > This is a result of considering relatively limited computer power
> > and resources on embedded systems, while such a assumption may not
> > be quite practical for other use cases.
> >
> > In this patch, added is a function, rsa_gen_key_prop(), which will
> > generate additional parameters for other uses, in particular
> > UEFI secure boot, on the fly.
> >
> > Note: the current code uses some "big number" routines from BearSSL
> > for the calculation.
> >
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > ---
> >  include/u-boot/rsa-mod-exp.h |   3 +
> >  lib/rsa/Kconfig              |   7 +
> >  lib/rsa/Makefile             |   1 +
> >  lib/rsa/rsa-keyprop.c        | 585 +++++++++++++++++++++++++++++++++++
> >  4 files changed, 596 insertions(+)
> >  create mode 100644 lib/rsa/rsa-keyprop.c
> >
> > diff --git a/include/u-boot/rsa-mod-exp.h b/include/u-boot/rsa-mod-exp.h
> > index 8a428c4b6a1a..ca189292d869 100644
> > --- a/include/u-boot/rsa-mod-exp.h
> > +++ b/include/u-boot/rsa-mod-exp.h
> > @@ -26,6 +26,9 @@ struct key_prop {
> >         uint32_t exp_len;       /* Exponent length in number of uint8_t */
> >  };
> >
> > +struct key_prop *rsa_gen_key_prop(const void *key, uint32_t keylen);
> > +void rsa_free_key_prop(struct key_prop *prop);
> 
> Please add full function comments.

Sure.

> > +
> >  /**
> >   * rsa_mod_exp_sw() - Perform RSA Modular Exponentiation in sw
> >   *
> > diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig
> > index 62b7ab9c5e5c..d1743d7a4c47 100644
> > --- a/lib/rsa/Kconfig
> > +++ b/lib/rsa/Kconfig
> > @@ -30,6 +30,13 @@ config RSA_VERIFY
> >         help
> >           Add RSA signature verification support.
> >
> > +config RSA_VERIFY_WITH_PKEY
> > +       bool "Execute RSA verification without key parameters from FDT"
> > +       depends on RSA
> > +       help
> > +         This options enables RSA signature verification without
> > +         using public key parameters which is embedded control FDT.
> 
> How about something like...
> 
> The standard RSA-signature verification code uses ....
> 
> This does not suit the use case where ...
> 
> This option enables ...

I will try to improve ...

> > +
> >  config RSA_SOFTWARE_EXP
> >         bool "Enable driver for RSA Modular Exponentiation in software"
> >         depends on DM
> > diff --git a/lib/rsa/Makefile b/lib/rsa/Makefile
> > index c07305188e0c..14ed3cb4012b 100644
> > --- a/lib/rsa/Makefile
> > +++ b/lib/rsa/Makefile
> > @@ -6,4 +6,5 @@
> >  # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> >
> >  obj-$(CONFIG_$(SPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o
> > +obj-$(CONFIG_RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o
> >  obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
> > diff --git a/lib/rsa/rsa-keyprop.c b/lib/rsa/rsa-keyprop.c
> > new file mode 100644
> > index 000000000000..d7d222e9bed9
> > --- /dev/null
> > +++ b/lib/rsa/rsa-keyprop.c
> > @@ -0,0 +1,585 @@
> > +// SPDX-License-Identifier: GPL-2.0+ and MIT
> > +/*
> > + * RSA library - generate parameters for a public key
> > + *
> > + * Copyright (c) 2019 Linaro Limited
> > + * Author: AKASHI Takahiro
> > + *
> > + * Big number routines in this file come from BearSSL:
> > + * Copyright (c) 2016 Thomas Pornin <pornin at bolet.org>
> > + */
> > +
> > +#include <common.h>
> > +#include <image.h>
> > +#include <malloc.h>
> > +#include <asm/byteorder.h>
> > +#include <crypto/internal/rsa.h>
> > +#include <u-boot/rsa-mod-exp.h>
> > +
> > +static inline unsigned
> 
> Please drop the inlines unless needed. Would prefer to leave this to
> the compiler.

Okay.

> Also please keep the function name on the same line as the 'static'.

Okay.

> > +br_dec16be(const void *src)
> > +{
> > +       return be16_to_cpup(src);
> > +}
> > +
> > +static inline uint32_t
> > +br_dec32be(const void *src)
> > +{
> > +       return be32_to_cpup(src);
> > +}
> > +
> > +static inline void
> > +br_enc32be(void *dst, uint32_t x)
> > +{
> > +       __be32 tmp;
> > +
> > +       tmp = cpu_to_be32(x);
> > +       memcpy(dst, &tmp, sizeof(tmp));
> > +}
> > +
> > +/* stripped version of src/inner.h */
> 
> ??

I mean that only a small subset of BearSSL's src/inner.h was imported here.

> > +
> > +static inline uint32_t
> > +NOT(uint32_t ctl)
> > +{
> > +       return ctl ^ 1;
> > +}
> > +
> 
> All of these functions need full comments please.

All the functions imported from BearSSL?
Please note that all the functions, except rsa_gen_key_prop()
rsa_free_key_prop(), are just imported without changes and
all are declared as static.

> > +static inline uint32_t
> > +MUX(uint32_t ctl, uint32_t x, uint32_t y)
> > +{
> > +       return y ^ (-ctl & (x ^ y));
> > +}
> > +
> > +static inline uint32_t
> > +EQ(uint32_t x, uint32_t y)
> 
> Should use lower case. Please run patman.

I would like to honer the original code(BearSSL)'s notation including
upper/lower cases for minimizing differences.


> > +{
> > +       uint32_t q;
> > +
> > +       q = x ^ y;
> > +       return NOT((q | -q) >> 31);
> > +}
> > +
> 
> [...]
> 
> Regards,
> Simon


More information about the U-Boot mailing list