[U-Boot] [PATCH v2 37/41] board: ge: mx53ppd: use DM for uart

Robert Beckett bob.beckett at collabora.com
Wed Oct 23 18:21:58 UTC 2019


Set chose stdout-path in DT
Add uart1 and associated pinctrl definitions in DT
Remove legacy uart pad and iomux code
Enable DM serial and mxc uart

Signed-off-by: Robert Beckett <bob.beckett at collabora.com>
---
 arch/arm/dts/imx53-ppd.dts | 17 +++++++++++++++++
 board/ge/mx53ppd/mx53ppd.c | 14 --------------
 configs/mx53ppd_defconfig  |  3 +++
 include/configs/mx53ppd.h  |  9 +--------
 4 files changed, 21 insertions(+), 22 deletions(-)

diff --git a/arch/arm/dts/imx53-ppd.dts b/arch/arm/dts/imx53-ppd.dts
index d308abc09c..681bc89331 100644
--- a/arch/arm/dts/imx53-ppd.dts
+++ b/arch/arm/dts/imx53-ppd.dts
@@ -13,6 +13,10 @@
 	model = "General Electric CS ONE";
 	compatible = "ge,imx53-cpuvo", "fsl,imx53";
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	wdt-reboot {
 		compatible = "wdt-reboot";
 		wdt = <&wdog1>;
@@ -167,6 +171,13 @@
 			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x0
 		>;
 	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
 };
 
 /* eMMC */
@@ -341,3 +352,9 @@
 	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c
index 486ef6d374..a8d4bf363e 100644
--- a/board/ge/mx53ppd/mx53ppd.c
+++ b/board/ge/mx53ppd/mx53ppd.c
@@ -79,24 +79,11 @@ int dram_init_banksize(void)
 	return 0;
 }
 
-static void setup_iomux_uart(void)
-{
-	static const iomux_v3_cfg_t uart_pads[] = {
-		MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
-		MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-}
-
 u32 get_board_rev(void)
 {
 	return get_cpu_rev() & ~(0xF << 8);
 }
 
-#define UART_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
-			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
 #ifdef CONFIG_USB_EHCI_MX5
 int board_ehci_hcd_init(int port)
 {
@@ -144,7 +131,6 @@ void ppd_gpio_init(void)
 
 int board_early_init_f(void)
 {
-	setup_iomux_uart();
 	ppd_gpio_init();
 
 	return 0;
diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
index 1fa9715850..ac1b701e69 100644
--- a/configs/mx53ppd_defconfig
+++ b/configs/mx53ppd_defconfig
@@ -54,6 +54,9 @@ CONFIG_PINCTRL_IMX5=y
 CONFIG_PWM_IMX=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_S35392A=y
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
+CONFIG_DM_SERIAL=y
+CONFIG_MXC_UART=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_MX5=y
 CONFIG_VIDEO_IPUV3=y
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index 5b1c467554..7bbb0f8dfd 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -11,8 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONSOLE_DEV	"ttymxc0"
-
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -25,9 +23,6 @@
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_REVISION_TAG
 
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-
 /* USB Configs */
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
@@ -70,11 +65,9 @@
 	"devnum=2\0" \
 	"rootdev=mmcblk0p\0" \
 	"quiet=quiet loglevel=0\0" \
-	"console=" CONSOLE_DEV "\0" \
 	"lvds=ldb\0" \
 	"setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
-		"vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \
-		"console=${console}\0" \
+		"vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \
 	"bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
 		"rootwait ${bootargs}\0" \
 	"doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
-- 
2.20.1



More information about the U-Boot mailing list