[U-Boot] [PATCH] spi: cadence_qspi: support DM_CLK

[Simon Goldschmidt]

Support loading clk speed via DM instead of requiring ad-hoc code.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---

 drivers/spi/cadence_qspi.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index e2e54cd277..0b89115885 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include <fdtdec.h>
 #include <malloc.h>
@@ -22,12 +23,27 @@ static int cadence_spi_write_speed(struct udevice *bus, uint hz)
 {
 	struct cadence_spi_platdata *plat = bus->platdata;
 	struct cadence_spi_priv *priv = dev_get_priv(bus);
+	unsigned int ref_clk_hz;
+	struct clk clk;
+	int ret;
+
+	ret = clk_get_by_index(bus, 0, &clk);
+	if (ret) {
+#ifdef CONFIG_CQSPI_REF_CLK
+		ref_clk_hz = CONFIG_CQSPI_REF_CLK;
+#else
+		return ret;
+#endif
+	} else {
+		ref_clk_hz = clk_get_rate(&clk);
+		clk_free(&clk);
+	}
 
 	cadence_qspi_apb_config_baudrate_div(priv->regbase,
-					     CONFIG_CQSPI_REF_CLK, hz);
+					     ref_clk_hz, hz);
 
 	/* Reconfigure delay timing if speed is changed. */
-	cadence_qspi_apb_delay(priv->regbase, CONFIG_CQSPI_REF_CLK, hz,
+	cadence_qspi_apb_delay(priv->regbase, ref_clk_hz, hz,
 			       plat->tshsl_ns, plat->tsd2d_ns,
 			       plat->tchsh_ns, plat->tslch_ns);
 
-- 
2.20.1