[U-Boot] [PATCH v2 05/10] arm: dts: k3-am65: Add VTM node

[Lokesh Vutla]

On 21/10/19 2:55 PM, Keerthy wrote:
> From: Tero Kristo <t-kristo at ti.com>
> 
> Add VTM node for voltage and thermal management. For u-boot, this is needed
> for supporting AVS class 0, as the efuse values for the OPPs are stored
> under the VTM.
> 
> Signed-off-by: Tero Kristo <t-kristo at ti.com>
> Signed-off-by: Keerthy <j-keerthy at ti.com>
> ---
>  arch/arm/dts/k3-am65-wakeup.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
> index 2676d6035b..5d050c6fd8 100644
> --- a/arch/arm/dts/k3-am65-wakeup.dtsi
> +++ b/arch/arm/dts/k3-am65-wakeup.dtsi
> @@ -62,4 +62,11 @@
>  		clocks = <&k3_clks 115 1>;
>  		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
>  	};
> +
> +	wkup_vtm0: wkup_vtm at 42050000 {
> +		compatible = "ti,am654-vtm", "ti,am654-avs";
> +		reg = <0x42050000 0x25c>;
> +		power-domains = <&k3_pds 80>;
> +		#thermal-sensor-cells = <1>;
> +	};

Is this going to be used in kernel? If not can you move this to r5-base board?

Thanks and regards,
Lokesh

>  };
>