[U-Boot] [PATCH v3 09/18] arm: dts: k3-am654-r5-base-board: Add VTM node

[Keerthy]

Add VTM node for voltage and thermal management. For u-boot, this is needed
for supporting AVS class 0, as the efuse values for the OPPs are stored
under the VTM.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
Signed-off-by: Keerthy <j-keerthy at ti.com>
---
Changes in v3:

  * Moved from generic wakeup.dtsi to r5 board file.

Changes in v2:

  * No change

 arch/arm/dts/k3-am654-r5-base-board.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 174d202306..6ab0f4af10 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -97,6 +97,13 @@
 		u-boot,dm-spl;
 	};
 
+	wkup_vtm0: wkup_vtm at 42050000 {
+		compatible = "ti,am654-vtm", "ti,am654-avs";
+		reg = <0x42050000 0x25c>;
+		power-domains = <&k3_pds 80>;
+		#thermal-sensor-cells = <1>;
+	};
+
 	clk_200mhz: dummy_clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-- 
2.17.1