[U-Boot] [PATCH v3 13/18] arm: dts: k3-j721e-r5-common-proc-board: Add VTM node

[Keerthy]

Add VTM node for voltage and thermal management. For u-boot, this is needed
for supporting AVS class 0, as the efuse values for the OPPs are stored
under the VTM.

Signed-off-by: Keerthy <j-keerthy at ti.com>
---
Changes in v3:

  * No change

Changes in v2:

  * No change

 arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
index 54d7998d27..e569809fcb 100644
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
@@ -59,6 +59,13 @@
 		mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
 		mbox-names = "tx", "rx";
 	};
+
+	wkup_vtm0: wkup_vtm at 42040000 {
+		compatible = "ti,am654-vtm", "ti,j721e-avs";
+		reg = <0x0 0x42040000 0x0 0x330>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
 };
 
 &dmsc {
-- 
2.17.1