[U-Boot] [PATCH v2 09/17] ram: rockchip: add phy driver code for PX30
Kever Yang
kever.yang at rock-chips.com
Fri Oct 25 01:33:56 UTC 2019
This sdram_phy_px30.c is based on PX30 SoC, the functions are common
for phy, other SoCs with similar hardware could re-use it.
Signed-off-by: YouMin Chen <cym at rock-chips.com>
Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---
Changes in v2: None
.../asm/arch-rockchip/sdram_phy_px30.h | 62 ++++++
.../arch-rockchip/sdram_phy_ron_rtt_px30.h | 59 +++++
drivers/ram/rockchip/sdram_phy_px30.c | 205 ++++++++++++++++++
3 files changed, 326 insertions(+)
create mode 100644 arch/arm/include/asm/arch-rockchip/sdram_phy_px30.h
create mode 100644 arch/arm/include/asm/arch-rockchip/sdram_phy_ron_rtt_px30.h
create mode 100644 drivers/ram/rockchip/sdram_phy_px30.c
diff --git a/arch/arm/include/asm/arch-rockchip/sdram_phy_px30.h b/arch/arm/include/asm/arch-rockchip/sdram_phy_px30.h
new file mode 100644
index 0000000000..c75a633c91
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/sdram_phy_px30.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_PHY_PX30_H
+#define _ASM_ARCH_SDRAM_PHY_PX30_H
+#include <asm/arch-rockchip/sdram_common.h>
+#include <asm/arch-rockchip/sdram_phy_ron_rtt_px30.h>
+
+struct ddr_phy_regs {
+ u32 phy[5][2];
+};
+
+#define PHY_REG(base, n) ((base) + 4 * (n))
+
+/* PHY_REG0 */
+#define DIGITAL_DERESET BIT(3)
+#define ANALOG_DERESET BIT(2)
+#define DIGITAL_RESET (0 << 3)
+#define ANALOG_RESET (0 << 2)
+
+/* PHY_REG1 */
+#define PHY_DDR2 (0)
+#define PHY_LPDDR2 (1)
+#define PHY_DDR3 (2)
+#define PHY_LPDDR3 (3)
+#define PHY_DDR4 (4)
+#define PHY_BL_4 (0 << 2)
+#define PHY_BL_8 BIT(2)
+
+/* PHY_REG2 */
+#define PHY_DTT_EN BIT(0)
+#define PHY_DTT_DISB (0 << 0)
+#define PHY_WRITE_LEVELING_EN BIT(2)
+#define PHY_WRITE_LEVELING_DISB (0 << 2)
+#define PHY_SELECT_CS0 (2)
+#define PHY_SELECT_CS1 (1)
+#define PHY_SELECT_CS0_1 (0)
+#define PHY_WRITE_LEVELING_SELECTCS(n) ((n) << 6)
+#define PHY_DATA_TRAINING_SELECTCS(n) ((n) << 4)
+
+struct ddr_phy_skew {
+ u32 a0_a1_skew[15];
+ u32 cs0_dm0_skew[11];
+ u32 cs0_dm1_skew[11];
+ u32 cs0_dm2_skew[11];
+ u32 cs0_dm3_skew[11];
+ u32 cs1_dm0_skew[11];
+ u32 cs1_dm1_skew[11];
+ u32 cs1_dm2_skew[11];
+ u32 cs1_dm3_skew[11];
+};
+
+void phy_soft_reset(void __iomem *phy_base);
+void phy_dram_set_bw(void __iomem *phy_base, u32 bw);
+void phy_cfg(void __iomem *phy_base,
+ struct ddr_phy_regs *phy_regs, struct ddr_phy_skew *skew,
+ struct sdram_base_params *base, u32 bw);
+int phy_data_training(void __iomem *phy_base, u32 cs, u32 dramtype);
+
+#endif
diff --git a/arch/arm/include/asm/arch-rockchip/sdram_phy_ron_rtt_px30.h b/arch/arm/include/asm/arch-rockchip/sdram_phy_ron_rtt_px30.h
new file mode 100644
index 0000000000..9c15232047
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/sdram_phy_ron_rtt_px30.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd
+ */
+
+#ifndef _ASM_ARCH_SDRAM_PHY_RON_RTT_PX30_H
+#define _ASM_ARCH_SDRAM_PHY_RON_RTT_PX30_H
+
+#define PHY_DDR3_RON_RTT_DISABLE (0)
+#define PHY_DDR3_RON_RTT_451ohm (1)
+#define PHY_DDR3_RON_RTT_225ohm (2)
+#define PHY_DDR3_RON_RTT_150ohm (3)
+#define PHY_DDR3_RON_RTT_112ohm (4)
+#define PHY_DDR3_RON_RTT_90ohm (5)
+#define PHY_DDR3_RON_RTT_75ohm (6)
+#define PHY_DDR3_RON_RTT_64ohm (7)
+#define PHY_DDR3_RON_RTT_56ohm (16)
+#define PHY_DDR3_RON_RTT_50ohm (17)
+#define PHY_DDR3_RON_RTT_45ohm (18)
+#define PHY_DDR3_RON_RTT_41ohm (19)
+#define PHY_DDR3_RON_RTT_37ohm (20)
+#define PHY_DDR3_RON_RTT_34ohm (21)
+#define PHY_DDR3_RON_RTT_33ohm (22)
+#define PHY_DDR3_RON_RTT_30ohm (23)
+#define PHY_DDR3_RON_RTT_28ohm (24)
+#define PHY_DDR3_RON_RTT_26ohm (25)
+#define PHY_DDR3_RON_RTT_25ohm (26)
+#define PHY_DDR3_RON_RTT_23ohm (27)
+#define PHY_DDR3_RON_RTT_22ohm (28)
+#define PHY_DDR3_RON_RTT_21ohm (29)
+#define PHY_DDR3_RON_RTT_20ohm (30)
+#define PHY_DDR3_RON_RTT_19ohm (31)
+
+#define PHY_DDR4_LPDDR3_RON_RTT_DISABLE (0)
+#define PHY_DDR4_LPDDR3_RON_RTT_480ohm (1)
+#define PHY_DDR4_LPDDR3_RON_RTT_240ohm (2)
+#define PHY_DDR4_LPDDR3_RON_RTT_160ohm (3)
+#define PHY_DDR4_LPDDR3_RON_RTT_120ohm (4)
+#define PHY_DDR4_LPDDR3_RON_RTT_96ohm (5)
+#define PHY_DDR4_LPDDR3_RON_RTT_80ohm (6)
+#define PHY_DDR4_LPDDR3_RON_RTT_68ohm (7)
+#define PHY_DDR4_LPDDR3_RON_RTT_60ohm (16)
+#define PHY_DDR4_LPDDR3_RON_RTT_53ohm (17)
+#define PHY_DDR4_LPDDR3_RON_RTT_48ohm (18)
+#define PHY_DDR4_LPDDR3_RON_RTT_43ohm (19)
+#define PHY_DDR4_LPDDR3_RON_RTT_40ohm (20)
+#define PHY_DDR4_LPDDR3_RON_RTT_37ohm (21)
+#define PHY_DDR4_LPDDR3_RON_RTT_34ohm (22)
+#define PHY_DDR4_LPDDR3_RON_RTT_32ohm (23)
+#define PHY_DDR4_LPDDR3_RON_RTT_30ohm (24)
+#define PHY_DDR4_LPDDR3_RON_RTT_28ohm (25)
+#define PHY_DDR4_LPDDR3_RON_RTT_26ohm (26)
+#define PHY_DDR4_LPDDR3_RON_RTT_25ohm (27)
+#define PHY_DDR4_LPDDR3_RON_RTT_24ohm (28)
+#define PHY_DDR4_LPDDR3_RON_RTT_22ohm (29)
+#define PHY_DDR4_LPDDR3_RON_RTT_21ohm (30)
+#define PHY_DDR4_LPDDR3_RON_RTT_20ohm (31)
+
+#endif
diff --git a/drivers/ram/rockchip/sdram_phy_px30.c b/drivers/ram/rockchip/sdram_phy_px30.c
new file mode 100644
index 0000000000..5de73770a8
--- /dev/null
+++ b/drivers/ram/rockchip/sdram_phy_px30.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2018 Rockchip Electronics Co., Ltd.
+ */
+
+#include <common.h>
+#include <ram.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/sdram.h>
+#include <asm/arch-rockchip/sdram_common.h>
+#include <asm/arch-rockchip/sdram_phy_px30.h>
+
+static void sdram_phy_dll_bypass_set(void __iomem *phy_base, u32 freq)
+{
+ u32 tmp;
+ u32 i, j;
+ u32 dqs_dll_freq;
+
+ setbits_le32(PHY_REG(phy_base, 0x13), 1 << 4);
+ clrbits_le32(PHY_REG(phy_base, 0x14), 1 << 3);
+ for (i = 0; i < 4; i++) {
+ j = 0x26 + i * 0x10;
+ setbits_le32(PHY_REG(phy_base, j), 1 << 4);
+ clrbits_le32(PHY_REG(phy_base, j + 0x1), 1 << 3);
+ }
+
+ if (freq <= 400)
+ /* DLL bypass */
+ setbits_le32(PHY_REG(phy_base, 0xa4), 0x1f);
+ else
+ clrbits_le32(PHY_REG(phy_base, 0xa4), 0x1f);
+
+ #ifdef CONFIG_ROCKCHIP_RK3328
+ dqs_dll_freq = 680;
+ #else
+ dqs_dll_freq = 801;
+ #endif
+
+ if (freq <= dqs_dll_freq)
+ tmp = 2;
+ else
+ tmp = 1;
+
+ for (i = 0; i < 4; i++) {
+ j = 0x28 + i * 0x10;
+ writel(tmp, PHY_REG(phy_base, j));
+ }
+}
+
+static void sdram_phy_set_ds_odt(void __iomem *phy_base,
+ u32 dram_type)
+{
+ u32 cmd_drv, clk_drv, dqs_drv, dqs_odt;
+ u32 i, j;
+
+ if (dram_type == DDR3) {
+ cmd_drv = PHY_DDR3_RON_RTT_34ohm;
+ clk_drv = PHY_DDR3_RON_RTT_45ohm;
+ dqs_drv = PHY_DDR3_RON_RTT_34ohm;
+ dqs_odt = PHY_DDR3_RON_RTT_225ohm;
+ } else {
+ cmd_drv = PHY_DDR4_LPDDR3_RON_RTT_34ohm;
+ clk_drv = PHY_DDR4_LPDDR3_RON_RTT_43ohm;
+ dqs_drv = PHY_DDR4_LPDDR3_RON_RTT_34ohm;
+ if (dram_type == LPDDR2)
+ dqs_odt = PHY_DDR4_LPDDR3_RON_RTT_DISABLE;
+ else
+ dqs_odt = PHY_DDR4_LPDDR3_RON_RTT_240ohm;
+ }
+ /* DS */
+ writel(cmd_drv, PHY_REG(phy_base, 0x11));
+ clrsetbits_le32(PHY_REG(phy_base, 0x12), 0x1f << 3, cmd_drv << 3);
+ writel(clk_drv, PHY_REG(phy_base, 0x16));
+ writel(clk_drv, PHY_REG(phy_base, 0x18));
+
+ for (i = 0; i < 4; i++) {
+ j = 0x20 + i * 0x10;
+ writel(dqs_drv, PHY_REG(phy_base, j));
+ writel(dqs_drv, PHY_REG(phy_base, j + 0xf));
+ /* ODT */
+ writel(dqs_odt, PHY_REG(phy_base, j + 0x1));
+ writel(dqs_odt, PHY_REG(phy_base, j + 0xe));
+ }
+}
+
+void phy_soft_reset(void __iomem *phy_base)
+{
+ clrbits_le32(PHY_REG(phy_base, 0), 0x3 << 2);
+ udelay(1);
+ setbits_le32(PHY_REG(phy_base, 0), ANALOG_DERESET);
+ udelay(5);
+ setbits_le32(PHY_REG(phy_base, 0), DIGITAL_DERESET);
+ udelay(1);
+}
+
+void phy_dram_set_bw(void __iomem *phy_base, u32 bw)
+{
+ if (bw == 2) {
+ clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 0xf << 4);
+ setbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
+ setbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
+ } else if (bw == 1) {
+ clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 3 << 4);
+ clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
+ clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
+ } else if (bw == 0) {
+ clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 1 << 4);
+ clrbits_le32(PHY_REG(phy_base, 0x36), 1 << 3);
+ clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
+ clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
+ }
+
+ phy_soft_reset(phy_base);
+}
+
+int phy_data_training(void __iomem *phy_base, u32 cs, u32 dramtype)
+{
+ u32 ret;
+ u32 odt_val;
+ u32 i, j;
+
+ odt_val = readl(PHY_REG(phy_base, 0x2e));
+
+ for (i = 0; i < 4; i++) {
+ j = 0x20 + i * 0x10;
+ writel(PHY_DDR3_RON_RTT_225ohm, PHY_REG(phy_base, j + 0x1));
+ writel(0, PHY_REG(phy_base, j + 0xe));
+ }
+
+ if (dramtype == DDR4) {
+ clrsetbits_le32(PHY_REG(phy_base, 0x29), 0x3, 0);
+ clrsetbits_le32(PHY_REG(phy_base, 0x39), 0x3, 0);
+ clrsetbits_le32(PHY_REG(phy_base, 0x49), 0x3, 0);
+ clrsetbits_le32(PHY_REG(phy_base, 0x59), 0x3, 0);
+ }
+ /* choose training cs */
+ clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs));
+ /* enable gate training */
+ clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs) | 1);
+ udelay(50);
+ ret = readl(PHY_REG(phy_base, 0xff));
+ /* disable gate training */
+ clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs) | 0);
+ #ifndef CONFIG_ROCKCHIP_RK3328
+ clrbits_le32(PHY_REG(phy_base, 2), 0x30);
+ #endif
+
+ if (dramtype == DDR4) {
+ clrsetbits_le32(PHY_REG(phy_base, 0x29), 0x3, 0x2);
+ clrsetbits_le32(PHY_REG(phy_base, 0x39), 0x3, 0x2);
+ clrsetbits_le32(PHY_REG(phy_base, 0x49), 0x3, 0x2);
+ clrsetbits_le32(PHY_REG(phy_base, 0x59), 0x3, 0x2);
+ }
+
+ if (ret & 0x10) {
+ ret = -1;
+ } else {
+ ret = (ret & 0xf) ^ (readl(PHY_REG(phy_base, 0)) >> 4);
+ ret = (ret == 0) ? 0 : -1;
+ }
+
+ for (i = 0; i < 4; i++) {
+ j = 0x20 + i * 0x10;
+ writel(odt_val, PHY_REG(phy_base, j + 0x1));
+ writel(odt_val, PHY_REG(phy_base, j + 0xe));
+ }
+ return ret;
+}
+
+void phy_cfg(void __iomem *phy_base,
+ struct ddr_phy_regs *phy_regs, struct ddr_phy_skew *skew,
+ struct sdram_base_params *base, u32 bw)
+{
+ u32 i;
+
+ sdram_phy_dll_bypass_set(phy_base, base->ddr_freq);
+ for (i = 0; phy_regs->phy[i][0] != 0xFFFFFFFF; i++) {
+ writel(phy_regs->phy[i][1],
+ phy_base + phy_regs->phy[i][0]);
+ }
+ if (bw == 2) {
+ clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 0xf << 4);
+ } else if (bw == 1) {
+ clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 3 << 4);
+ /* disable DQS2,DQS3 tx dll for saving power */
+ clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
+ clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
+ } else {
+ clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 1 << 4);
+ /* disable DQS2,DQS3 tx dll for saving power */
+ clrbits_le32(PHY_REG(phy_base, 0x36), 1 << 3);
+ clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
+ clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
+ }
+ sdram_phy_set_ds_odt(phy_base, base->dramtype);
+
+ /* deskew */
+ setbits_le32(PHY_REG(phy_base, 2), 8);
+ sdram_copy_to_reg(PHY_REG(phy_base, 0xb0),
+ &skew->a0_a1_skew[0], 15 * 4);
+ sdram_copy_to_reg(PHY_REG(phy_base, 0x70),
+ &skew->cs0_dm0_skew[0], 44 * 4);
+ sdram_copy_to_reg(PHY_REG(phy_base, 0xc0),
+ &skew->cs1_dm0_skew[0], 44 * 4);
+}
--
2.17.1
More information about the U-Boot
mailing list