[U-Boot] [PATCH] Makefile: fix dependency for imx targets
Heiko Schocher
hs at denx.de
Fri Oct 25 12:46:54 UTC 2019
imx targets are defined in arch/arm/mach-imx/Makefile.
Some of them are dependent on targets defined in main
Makefile. For the Makefile in arch/arm/mach-imx this
targets must be finished before the imx targets are
build, if not you get for example the error:
make -f /home/hs/abb/mainlining/u-boot/scripts/Makefile.build obj=arch/arm/mach-imx u-boot-dtb.imx
make[2]: *** No rule to make target 'u-boot-fit-dtb.bin', needed by 'u-boot-dtb.imx'. Stop.
make[1]: *** [/home/hs/abb/mainlining/u-boot/Makefile:1123: u-boot-dtb.imx] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/work/hs/compile/u-boot/aristainetos2_defconfig'
make: *** [Makefile:148: sub-make] Error 2
compile failed
In above case of CONFIG_MULTI_DTB_FIT is defined, the
u-boot-dtb.imx is dependent on the u-boot-fit-dtb.bin
which may is not build yet ...
I could reproduce this error on a travis build also if
I build an out-of-tree build on a local machine with a
build directory on a "slow" slow storage device. If
building the same source target with a build dir on a
fast storage device, the build works.
I found no solution to tell the arch/arm/mach-imx/Makefile
to find the targets in main Makefile, if there is a way
this would be the better fix.
I solved it by adding a IMX_DEPS var, which holds a list
of main u-boot targets, which must be finished, before
calling imx targets and fixed the build for imx
targets which enabled CONFIG_MULTI_DTB_FIT.
I think it is just luck, that imx targets with
CONFIG_OF_SEPARATE enabled build, because the
u-boot-dtb.imx target depends on u-boot-dtb.bin
which gets build early enough before starting with
u-boot-dtb.imx. May this targets should be fixed too.
Signed-off-by: Heiko Schocher <hs at denx.de>
---
travis build:
https://travis-ci.org/hsdenx/u-boot-test/builds/602656876
Makefile | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index cbacf1cfe2..1d2c778bd5 100644
--- a/Makefile
+++ b/Makefile
@@ -1119,7 +1119,15 @@ u-boot.bin: u-boot-nodtb.bin FORCE
$(call if_changed,copy)
endif
-%.imx: %.bin
+# we call Makefile in arch/arm/mach-imx which
+# has targets which are dependent on targets defined
+# here. make could not resolve them and we must ensure
+# that they are finished before calling imx targets
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+IMX_DEPS = u-boot-fit-dtb.bin
+endif
+
+%.imx: $(IMX_DEPS) %.bin
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
$(BOARD_SIZE_CHECK)
--
2.21.0
More information about the U-Boot
mailing list