[U-Boot] [PATCH v6 3/3] mtd: Makefile: deep cleanup
Miquel Raynal
miquel.raynal at bootlin.com
Fri Oct 25 17:39:31 UTC 2019
Move MTD-related lines out of the root Makefile. Put them in their
respective directories. Enclose some of these new lines to skip them
when building the SPL. MTD core files and some MTD device drivers are
compiled in a mtd.o object and included in the final object only if
MTD support is required (there are two different symbols for that, one
for U-Boot and one for the SPL).
Now that all defconfigs have been fixed, we can stop the logic where
enabling a command selects the core files to compile. This logic is
broken since selecting a symbol with a 'depends on' will not enforce
this secondary dependency.
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
Makefile | 5 ----
drivers/Makefile | 7 ++----
drivers/mtd/Makefile | 50 +++++++++++++++++++++++++++------------
drivers/mtd/nand/Makefile | 5 ++++
4 files changed, 42 insertions(+), 25 deletions(-)
diff --git a/Makefile b/Makefile
index 1d9ade948b..e55c0b236e 100644
--- a/Makefile
+++ b/Makefile
@@ -708,11 +708,6 @@ libs-y += drivers/
libs-y += drivers/dma/
libs-y += drivers/gpio/
libs-y += drivers/i2c/
-libs-y += drivers/mtd/
-libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
-libs-y += drivers/mtd/onenand/
-libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
-libs-y += drivers/mtd/spi/
libs-y += drivers/net/
libs-y += drivers/net/phy/
libs-y += drivers/power/ \
diff --git a/drivers/Makefile b/drivers/Makefile
index a4bb5e4975..708aa2a1a7 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
obj-$(CONFIG_$(SPL_TPL_)LED) += led/
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
+obj-y += mtd/
obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
@@ -19,7 +19,6 @@ obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/
obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
-obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
@@ -42,9 +41,6 @@ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
obj-$(CONFIG_SPL_DM_RESET) += reset/
-obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
-obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
-obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
@@ -102,6 +98,7 @@ obj-$(CONFIG_QE) += qe/
obj-$(CONFIG_U_QE) += qe/
obj-y += mailbox/
obj-y += memory/
+obj-y += mtd/
obj-y += pwm/
obj-y += reset/
obj-y += input/
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index c9a96adace..fd4c6687cb 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -3,20 +3,40 @@
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-ifneq (,$(findstring y,$(CONFIG_MTD)$(CONFIG_CMD_ONENAND)$(CONFIG_CMD_MTD)))
-obj-y += mtdcore.o mtd_uboot.o
+mtd-$(CONFIG_MTD) += mtdcore.o mtd_uboot.o
+mtd-$(CONFIG_DM_MTD) += mtd-uclass.o
+mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
+mtd-$(CONFIG_MTD_CONCAT) += mtdconcat.o
+mtd-$(CONFIG_ALTERA_QSPI) += altera_qspi.o
+mtd-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
+mtd-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o
+mtd-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
+mtd-$(CONFIG_MW_EEPROM) += mw_eeprom.o
+mtd-$(CONFIG_FLASH_PIC32) += pic32_flash.o
+mtd-$(CONFIG_ST_SMI) += st_smi.o
+mtd-$(CONFIG_STM32_FLASH) += stm32_flash.o
+mtd-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o
+
+# U-Boot build
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
+
+ifneq ($(mtd-y),)
+obj-y += mtd.o
endif
-obj-$(CONFIG_DM_MTD) += mtd-uclass.o
-obj-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
-obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
-obj-$(CONFIG_ALTERA_QSPI) += altera_qspi.o
-obj-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
-obj-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o
-obj-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
-obj-$(CONFIG_MW_EEPROM) += mw_eeprom.o
-obj-$(CONFIG_FLASH_PIC32) += pic32_flash.o
-obj-$(CONFIG_ST_SMI) += st_smi.o
-obj-$(CONFIG_STM32_FLASH) += stm32_flash.o
-obj-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o
-
obj-y += nand/
+obj-y += onenand/
+obj-y += spi/
+obj-$(CONFIG_MTD_UBI) += ubi/
+
+#SPL/TPL build
+else
+
+ifneq ($(mtd-y),)
+obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd.o
+endif
+obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += nand/
+obj-$(CONFIG_SPL_ONENAND_SUPPORT) += onenand/
+obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += spi/
+obj-$(CONFIG_SPL_UBI) += ubispl/
+
+endif
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a358bc680e..96e186600a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,5 +1,10 @@
# SPDX-License-Identifier: GPL-2.0+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
nandcore-objs := core.o bbt.o
obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
+obj-$(CONFIG_MTD_RAW_NAND) += raw/
obj-$(CONFIG_MTD_SPI_NAND) += spi/
+else
+obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += raw/
+endif
--
2.20.1
More information about the U-Boot
mailing list