[U-Boot] [PATCH 07/10] board: ge: bx50v3: Enable DM for PCI and ethernet
Robert Beckett
bob.beckett at collabora.com
Mon Oct 28 16:25:01 UTC 2019
From: Denis Zalevskiy <denis.zalevskiy at ge.com>
DM for PCI pulls DM for ethernet that also needs other changes described
below to build u-boot and keep existing functionality - ability to update
MAC addresses of FEC ethernet adapter and I210 adapter connected to the
Marvell switch.
- fec_mxc driver with DM needs PHYLIB;
- configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig;
- FEC is marked as eth0 because it is always present, so indices changed:
I210 are still probed in the same order;
- board_eth_init() was used by legacy ethernet, setup for enet iomux and
pcie is moved to the board_late_init();
- pci_init() is called from the board_late_init() to initiate PCI bus
probing, so I210 devices are propagated to the device tree;
Signed-off-by: Denis Zalevskiy <denis.zalevskiy at ge.com>
[Describe PHY reset in device tree]
Signed-off-by: Ian Ray <ian.ray at ge.com>
Signed-off-by: Robert Beckett <bob.beckett at collabora.com>
---
board/ge/bx50v3/bx50v3.c | 75 +++++++------------------------------
configs/ge_bx50v3_defconfig | 8 ++++
include/configs/ge_bx50v3.h | 12 ------
3 files changed, 21 insertions(+), 74 deletions(-)
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 988d3b19b5..05fa792ed8 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -35,6 +35,8 @@
#include "../common/ge_common.h"
#include "../common/vpd_reader.h"
#include "../../../drivers/net/e1000.h"
+#include <pci.h>
+
DECLARE_GLOBAL_DATA_PTR;
static int confidx; /* Default to generic. */
@@ -82,38 +84,6 @@ static iomux_v3_cfg_t const uart4_pads[] = {
MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-static iomux_v3_cfg_t const enet_pads[] = {
- MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
- MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- /* AR8033 PHY Reset */
- MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_iomux_enet(void)
-{
- imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
-
- /* Reset AR8033 PHY */
- gpio_request(IMX_GPIO_NR(1, 28), "fec_rst");
- gpio_direction_output(IMX_GPIO_NR(1, 28), 0);
- mdelay(10);
- gpio_set_value(IMX_GPIO_NR(1, 28), 1);
- mdelay(1);
-}
-
static struct i2c_pads_info i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | I2C_PAD,
@@ -153,16 +123,6 @@ static struct i2c_pads_info i2c_pad_info3 = {
}
};
-static iomux_v3_cfg_t const pcie_pads[] = {
- MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_pcie(void)
-{
- imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
-}
-
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
@@ -454,7 +414,7 @@ static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type,
static void process_vpd(struct vpd_cache *vpd)
{
- int fec_index = -1;
+ int fec_index = 0;
int i210_index = -1;
if (!vpd->is_read) {
@@ -462,41 +422,30 @@ static void process_vpd(struct vpd_cache *vpd)
return;
}
+ if (vpd->has & VPD_HAS_MAC1)
+ eth_env_set_enetaddr_by_index("eth", fec_index, vpd->mac1);
+
+ env_set("ethact", "eth0");
+
switch (vpd->product_id) {
case VPD_PRODUCT_B450:
env_set("confidx", "1");
- i210_index = 0;
- fec_index = 1;
+ i210_index = 1;
break;
case VPD_PRODUCT_B650:
env_set("confidx", "2");
- i210_index = 0;
- fec_index = 1;
+ i210_index = 1;
break;
case VPD_PRODUCT_B850:
env_set("confidx", "3");
- i210_index = 1;
- fec_index = 2;
+ i210_index = 2;
break;
}
- if (fec_index >= 0 && (vpd->has & VPD_HAS_MAC1))
- eth_env_set_enetaddr_by_index("eth", fec_index, vpd->mac1);
-
if (i210_index >= 0 && (vpd->has & VPD_HAS_MAC2))
eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2);
}
-int board_eth_init(bd_t *bis)
-{
- setup_iomux_enet();
- setup_pcie();
-
- e1000_initialize(bis);
-
- return cpu_eth_init(bis);
-}
-
static iomux_v3_cfg_t const misc_pads[] = {
MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NC_PAD_CTRL),
@@ -658,6 +607,8 @@ int board_late_init(void)
check_time();
+ pci_init();
+
return 0;
}
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index e81ae91c5f..7bc2f40077 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -71,3 +71,11 @@ CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_PNP=y
+CONFIG_DM_ETH=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_FEC_MXC=y
+CONFIG_ETHPRIME="FEC"
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 92a927bb82..d572424831 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -49,16 +49,6 @@
#define CONFIG_USB_GADGET_MASS_STORAGE
#endif
-/* Networking Configs */
-#ifdef CONFIG_NET
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 4
-#define CONFIG_PHY_ATHEROS
-#endif
-
/* Serial Flash */
/* allow to overwrite serial and ethaddr */
@@ -197,8 +187,6 @@
#define CONFIG_IMX6_PWM_PER_CLK 66000000
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
--
2.20.1
More information about the U-Boot
mailing list