[U-Boot] [RFC PATCH 13/29] arch: include: octeontx: add headers for OcteonTX
Suneel Garapati
suneelglinux at gmail.com
Tue Oct 29 21:08:05 UTC 2019
From: Suneel Garapati <sgarapati at marvell.com>
Signed-off-by: Suneel Garapati <sgarapati at marvell.com>
---
arch/arm/include/asm/arch-octeontx/board.h | 121 ++
arch/arm/include/asm/arch-octeontx/clock.h | 25 +
.../asm/arch-octeontx/csrs/csrs-mio_emm.h | 1193 +++++++++++++++++
.../include/asm/arch-octeontx/csrs/csrs-xcv.h | 428 ++++++
arch/arm/include/asm/arch-octeontx/gpio.h | 6 +
arch/arm/include/asm/arch-octeontx/smc.h | 20 +
arch/arm/include/asm/arch-octeontx/soc.h | 31 +
7 files changed, 1824 insertions(+)
create mode 100644 arch/arm/include/asm/arch-octeontx/board.h
create mode 100644 arch/arm/include/asm/arch-octeontx/clock.h
create mode 100644 arch/arm/include/asm/arch-octeontx/csrs/csrs-mio_emm.h
create mode 100644 arch/arm/include/asm/arch-octeontx/csrs/csrs-xcv.h
create mode 100644 arch/arm/include/asm/arch-octeontx/gpio.h
create mode 100644 arch/arm/include/asm/arch-octeontx/smc.h
create mode 100644 arch/arm/include/asm/arch-octeontx/soc.h
diff --git a/arch/arm/include/asm/arch-octeontx/board.h b/arch/arm/include/asm/arch-octeontx/board.h
new file mode 100644
index 0000000000..99a3b71534
--- /dev/null
+++ b/arch/arm/include/asm/arch-octeontx/board.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <asm/arch/soc.h>
+
+#define MAX_LMAC_PER_BGX 4
+#define LMAC_CNT MAX_LMAC_PER_BGX
+
+#if defined(CONFIG_TARGET_OCTEONTX_81XX)
+
+/** Maximum number of BGX interfaces per CPU node */
+#define MAX_BGX_PER_NODE 3
+#define OCTEONTX_XCV /* RGMII Interface */
+
+#elif defined(CONFIG_TARGET_OCTEONTX_83XX)
+
+/** Maximum number of BGX interfaces per CPU node */
+#define MAX_BGX_PER_NODE 4
+
+#endif
+
+/** Reg offsets */
+#define RST_BOOT 0x87E006001600ULL
+
+/** Structure definitions */
+
+/**
+ * Register (RSL) rst_boot
+ *
+ * RST Boot Register This register is not accessible through ROM scripts;
+ * see SCR_WRITE32_S[ADDR].
+ */
+union rst_boot {
+ u64 u;
+ struct rst_boot_s {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 reserved_2_32 : 31;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_52 : 6;
+ u64 gpio_ejtag : 1;
+ u64 mcp_jtagdis : 1;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 jt_tstmode : 1;
+ u64 ckill_ppdis : 1;
+ u64 trusted_mode : 1;
+ u64 reserved_61_62 : 2;
+ u64 chipkill : 1;
+ } s;
+ struct rst_boot_cn81xx {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 lboot : 10;
+ u64 lboot_ext23 : 6;
+ u64 lboot_ext45 : 6;
+ u64 lboot_jtg : 1;
+ u64 lboot_ckill : 1;
+ u64 reserved_26_29 : 4;
+ u64 lboot_oci : 3;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_54 : 8;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 jt_tstmode : 1;
+ u64 ckill_ppdis : 1;
+ u64 trusted_mode : 1;
+ u64 ejtagdis : 1;
+ u64 jtcsrdis : 1;
+ u64 chipkill : 1;
+ } cn81xx;
+ struct rst_boot_cn83xx {
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 lboot : 10;
+ u64 lboot_ext23 : 6;
+ u64 lboot_ext45 : 6;
+ u64 lboot_jtg : 1;
+ u64 lboot_ckill : 1;
+ u64 lboot_pf_flr : 4;
+ u64 lboot_oci : 3;
+ u64 pnr_mul : 6;
+ u64 reserved_39 : 1;
+ u64 c_mul : 7;
+ u64 reserved_47_54 : 8;
+ u64 dis_scan : 1;
+ u64 dis_huk : 1;
+ u64 vrm_err : 1;
+ u64 jt_tstmode : 1;
+ u64 ckill_ppdis : 1;
+ u64 trusted_mode : 1;
+ u64 ejtagdis : 1;
+ u64 jtcsrdis : 1;
+ u64 chipkill : 1;
+ } cn83xx;
+};
+
+/** Function definitions */
+void mem_map_fill(void);
+int octeontx_board_has_pmp(void);
+const char *fdt_get_board_model(void);
+void fdt_parse_phy_info(void);
+void fdt_board_get_ethaddr(int bgx, int lmac, unsigned char *eth);
+
+void bgx_set_board_info(int bgx_id, int *mdio_bus, int *phy_addr,
+ bool *autoneg_dis, bool *lmac_reg, bool *lmac_enable);
+
+#endif /* __BOARD_H__ */
diff --git a/arch/arm/include/asm/arch-octeontx/clock.h b/arch/arm/include/asm/arch-octeontx/clock.h
new file mode 100644
index 0000000000..7bf600a1f2
--- /dev/null
+++ b/arch/arm/include/asm/arch-octeontx/clock.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+/** System PLL reference clock */
+#define PLL_REF_CLK 50000000 /* 50 MHz */
+#define NS_PER_REF_CLK_TICK (1000000000 / PLL_REF_CLK)
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 octeontx_get_io_clock(void);
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 octeontx_get_core_clock(void);
+
+#endif /* __CLOCK_H__ */
diff --git a/arch/arm/include/asm/arch-octeontx/csrs/csrs-mio_emm.h b/arch/arm/include/asm/arch-octeontx/csrs/csrs-mio_emm.h
new file mode 100644
index 0000000000..fffb71098f
--- /dev/null
+++ b/arch/arm/include/asm/arch-octeontx/csrs/csrs-mio_emm.h
@@ -0,0 +1,1193 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_MIO_EMM_H__
+#define __CSRS_MIO_EMM_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * MIO_EMM.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration mio_emm_bar_e
+ *
+ * eMMC Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN8_SIZE 0x800000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9 (0x87e009000000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR0_CN9_SIZE 0x10000ull
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4 (0x87e009f00000ll)
+#define MIO_EMM_BAR_E_MIO_EMM_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration mio_emm_int_vec_e
+ *
+ * eMMC MSI-X Vector Enumeration Enumerates the MSI-X interrupt vectors.
+ */
+#define MIO_EMM_INT_VEC_E_DMA_INT_DONE (8)
+#define MIO_EMM_INT_VEC_E_DMA_INT_FIFO (7)
+#define MIO_EMM_INT_VEC_E_EMM_BUF_DONE (0)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_DONE (1)
+#define MIO_EMM_INT_VEC_E_EMM_CMD_ERR (3)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_DONE (2)
+#define MIO_EMM_INT_VEC_E_EMM_DMA_ERR (4)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_DONE (5)
+#define MIO_EMM_INT_VEC_E_EMM_SWITCH_ERR (6)
+#define MIO_EMM_INT_VEC_E_NCB_FLT (9)
+#define MIO_EMM_INT_VEC_E_NCB_RAS (0xa)
+
+/**
+ * Register (RSL) mio_emm_access_wdog
+ *
+ * eMMC Access Watchdog Register
+ */
+union mio_emm_access_wdog {
+ u64 u;
+ struct mio_emm_access_wdog_s {
+ u64 clk_cnt : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct mio_emm_access_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_ACCESS_WDOG(void)
+{
+ return 0x20f0;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_dat
+ *
+ * eMMC Data Buffer Access Register
+ */
+union mio_emm_buf_dat {
+ u64 u;
+ struct mio_emm_buf_dat_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_buf_dat_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_DAT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_DAT(void)
+{
+ return 0x20e8;
+}
+
+/**
+ * Register (RSL) mio_emm_buf_idx
+ *
+ * eMMC Data Buffer Address Register
+ */
+union mio_emm_buf_idx {
+ u64 u;
+ struct mio_emm_buf_idx_s {
+ u64 offset : 6;
+ u64 buf_num : 1;
+ u64 reserved_7_15 : 9;
+ u64 inc : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct mio_emm_buf_idx_s cn; */
+};
+
+static inline u64 MIO_EMM_BUF_IDX(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_BUF_IDX(void)
+{
+ return 0x20e0;
+}
+
+/**
+ * Register (RSL) mio_emm_calb
+ *
+ * eMMC Calbration Register This register initiates delay line
+ * characterization.
+ */
+union mio_emm_calb {
+ u64 u;
+ struct mio_emm_calb_s {
+ u64 start : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct mio_emm_calb_s cn; */
+};
+
+static inline u64 MIO_EMM_CALB(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CALB(void)
+{
+ return 0x20c0;
+}
+
+/**
+ * Register (RSL) mio_emm_cfg
+ *
+ * eMMC Configuration Register
+ */
+union mio_emm_cfg {
+ u64 u;
+ struct mio_emm_cfg_s {
+ u64 bus_ena : 4;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct mio_emm_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CFG(void)
+{
+ return 0x2000;
+}
+
+/**
+ * Register (RSL) mio_emm_cmd
+ *
+ * eMMC Command Register
+ */
+union mio_emm_cmd {
+ u64 u;
+ struct mio_emm_cmd_s {
+ u64 arg : 32;
+ u64 cmd_idx : 6;
+ u64 rtype_xor : 3;
+ u64 ctype_xor : 2;
+ u64 reserved_43_48 : 6;
+ u64 offset : 6;
+ u64 dbuf : 1;
+ u64 reserved_56_58 : 3;
+ u64 cmd_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 reserved_63 : 1;
+ } s;
+ /* struct mio_emm_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_CMD(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_CMD(void)
+{
+ return 0x2058;
+}
+
+/**
+ * Register (RSL) mio_emm_comp
+ *
+ * eMMC Compensation Register
+ */
+union mio_emm_comp {
+ u64 u;
+ struct mio_emm_comp_s {
+ u64 nctl : 3;
+ u64 reserved_3_7 : 5;
+ u64 pctl : 3;
+ u64 reserved_11_63 : 53;
+ } s;
+ /* struct mio_emm_comp_s cn; */
+};
+
+static inline u64 MIO_EMM_COMP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_COMP(void)
+{
+ return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_debug
+ *
+ * eMMC Debug Register
+ */
+union mio_emm_debug {
+ u64 u;
+ struct mio_emm_debug_s {
+ u64 clk_on : 1;
+ u64 reserved_1_7 : 7;
+ u64 cmd_sm : 4;
+ u64 data_sm : 4;
+ u64 dma_sm : 4;
+ u64 emmc_clk_disable : 1;
+ u64 rdsync_rst : 1;
+ u64 reserved_22_63 : 42;
+ } s;
+ struct mio_emm_debug_cn96xxp1 {
+ u64 clk_on : 1;
+ u64 reserved_1_7 : 7;
+ u64 cmd_sm : 4;
+ u64 data_sm : 4;
+ u64 dma_sm : 4;
+ u64 reserved_20_63 : 44;
+ } cn96xxp1;
+ /* struct mio_emm_debug_s cn96xxp3; */
+ /* struct mio_emm_debug_cn96xxp1 cnf95xx; */
+};
+
+static inline u64 MIO_EMM_DEBUG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DEBUG(void)
+{
+ return 0x20f8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma
+ *
+ * eMMC External DMA Configuration Register
+ */
+union mio_emm_dma {
+ u64 u;
+ struct mio_emm_dma_s {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 rel_wr : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 extra_args : 1;
+ } s;
+ struct mio_emm_dma_cn8 {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 rel_wr : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 reserved_63 : 1;
+ } cn8;
+ struct mio_emm_dma_cn9 {
+ u64 card_addr : 32;
+ u64 block_cnt : 16;
+ u64 multi : 1;
+ u64 rw : 1;
+ u64 reserved_50 : 1;
+ u64 thres : 6;
+ u64 dat_null : 1;
+ u64 sector : 1;
+ u64 dma_val : 1;
+ u64 bus_id : 2;
+ u64 skip_busy : 1;
+ u64 extra_args : 1;
+ } cn9;
+};
+
+static inline u64 MIO_EMM_DMA(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA(void)
+{
+ return 0x2050;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_adr
+ *
+ * eMMC DMA Address Register This register sets the address for eMMC/SD
+ * flash transfers to/from memory. Sixty-four-bit operations must be used
+ * to access this register. This register is updated by the DMA hardware
+ * and can be reloaded by the values placed in the MIO_EMM_DMA_FIFO_ADR.
+ */
+union mio_emm_dma_adr {
+ u64 u;
+ struct mio_emm_dma_adr_s {
+ u64 adr : 53;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_dma_adr_cn8 {
+ u64 adr : 49;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_dma_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ADR(void)
+{
+ return 0x188;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_arg
+ *
+ * eMMC External DMA Extra Arguments Register
+ */
+union mio_emm_dma_arg {
+ u64 u;
+ struct mio_emm_dma_arg_s {
+ u64 cmd23_args : 8;
+ u64 force_pgm : 1;
+ u64 context_id : 4;
+ u64 tag_req : 1;
+ u64 pack_cmd : 1;
+ u64 rel_wr : 1;
+ u64 alt_cmd : 6;
+ u64 skip_blk_cmd : 1;
+ u64 reserved_23_31 : 9;
+ u64 alt_cmd_arg : 32;
+ } s;
+ /* struct mio_emm_dma_arg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_ARG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_ARG(void)
+{
+ return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_cfg
+ *
+ * eMMC DMA Configuration Register This register controls the internal
+ * DMA engine used with the eMMC/SD flash controller. Sixty- four-bit
+ * operations must be used to access this register. This register is
+ * updated by the hardware DMA engine and can also be reloaded by writes
+ * to the MIO_EMM_DMA_FIFO_CMD register.
+ */
+union mio_emm_dma_cfg {
+ u64 u;
+ struct mio_emm_dma_cfg_s {
+ u64 reserved_0_35 : 36;
+ u64 size : 20;
+ u64 endian : 1;
+ u64 swap8 : 1;
+ u64 swap16 : 1;
+ u64 swap32 : 1;
+ u64 reserved_60 : 1;
+ u64 clr : 1;
+ u64 rw : 1;
+ u64 en : 1;
+ } s;
+ /* struct mio_emm_dma_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_CFG(void)
+{
+ return 0x180;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_adr
+ *
+ * eMMC Internal DMA FIFO Address Register This register specifies the
+ * internal address that is loaded into the eMMC internal DMA FIFO. The
+ * FIFO is used to queue up operations for the
+ * MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR when the DMA completes successfully.
+ */
+union mio_emm_dma_fifo_adr {
+ u64 u;
+ struct mio_emm_dma_fifo_adr_s {
+ u64 reserved_0_2 : 3;
+ u64 adr : 50;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_dma_fifo_adr_cn8 {
+ u64 reserved_0_2 : 3;
+ u64 adr : 46;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_dma_fifo_adr_s cn9; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_ADR(void)
+{
+ return 0x170;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cfg
+ *
+ * eMMC Internal DMA FIFO Configuration Register This register controls
+ * DMA FIFO operations.
+ */
+union mio_emm_dma_fifo_cfg {
+ u64 u;
+ struct mio_emm_dma_fifo_cfg_s {
+ u64 count : 5;
+ u64 reserved_5_7 : 3;
+ u64 int_lvl : 5;
+ u64 reserved_13_15 : 3;
+ u64 clr : 1;
+ u64 reserved_17_63 : 47;
+ } s;
+ /* struct mio_emm_dma_fifo_cfg_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CFG(void)
+{
+ return 0x160;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_fifo_cmd
+ *
+ * eMMC Internal DMA FIFO Command Register This register specifies a
+ * command that is loaded into the eMMC internal DMA FIFO. The FIFO is
+ * used to queue up operations for the MIO_EMM_DMA_CFG/MIO_EMM_DMA_ADR
+ * when the DMA completes successfully. Writes to this register store
+ * both the MIO_EMM_DMA_FIFO_CMD and the MIO_EMM_DMA_FIFO_ADR contents
+ * into the FIFO and increment the MIO_EMM_DMA_FIFO_CFG[COUNT] field.
+ * Note: This register has a similar format to MIO_EMM_DMA_CFG with the
+ * exception that the EN and CLR fields are absent. These are supported
+ * in MIO_EMM_DMA_FIFO_CFG.
+ */
+union mio_emm_dma_fifo_cmd {
+ u64 u;
+ struct mio_emm_dma_fifo_cmd_s {
+ u64 reserved_0_35 : 36;
+ u64 size : 20;
+ u64 endian : 1;
+ u64 swap8 : 1;
+ u64 swap16 : 1;
+ u64 swap32 : 1;
+ u64 intdis : 1;
+ u64 reserved_61 : 1;
+ u64 rw : 1;
+ u64 reserved_63 : 1;
+ } s;
+ /* struct mio_emm_dma_fifo_cmd_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_FIFO_CMD(void)
+{
+ return 0x178;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int
+ *
+ * eMMC DMA Interrupt Register Sixty-four-bit operations must be used to
+ * access this register.
+ */
+union mio_emm_dma_int {
+ u64 u;
+ struct mio_emm_dma_int_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT(void)
+{
+ return 0x190;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1c
+ *
+ * eMMC DMA Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union mio_emm_dma_int_ena_w1c {
+ u64 u;
+ struct mio_emm_dma_int_ena_w1c_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_ena_w1c_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1C(void)
+{
+ return 0x1a8;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_ena_w1s
+ *
+ * eMMC DMA Interrupt Enable Set Register This register sets interrupt
+ * enable bits.
+ */
+union mio_emm_dma_int_ena_w1s {
+ u64 u;
+ struct mio_emm_dma_int_ena_w1s_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_ena_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_ENA_W1S(void)
+{
+ return 0x1a0;
+}
+
+/**
+ * Register (RSL) mio_emm_dma_int_w1s
+ *
+ * eMMC DMA Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_dma_int_w1s {
+ u64 u;
+ struct mio_emm_dma_int_w1s_s {
+ u64 done : 1;
+ u64 fifo : 1;
+ u64 reserved_2_63 : 62;
+ } s;
+ /* struct mio_emm_dma_int_w1s_s cn; */
+};
+
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_DMA_INT_W1S(void)
+{
+ return 0x198;
+}
+
+/**
+ * Register (RSL) mio_emm_int
+ *
+ * eMMC Interrupt Register
+ */
+union mio_emm_int {
+ u64 u;
+ struct mio_emm_int_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT(void)
+{
+ return 0x2078;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1c
+ *
+ * eMMC Interrupt Enable Clear Register This register clears interrupt
+ * enable bits.
+ */
+union mio_emm_int_ena_w1c {
+ u64 u;
+ struct mio_emm_int_ena_w1c_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_ena_w1c_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_ena_w1c_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1C(void)
+{
+ return 0x20b8;
+}
+
+/**
+ * Register (RSL) mio_emm_int_ena_w1s
+ *
+ * eMMC Interrupt Enable Set Register This register sets interrupt enable
+ * bits.
+ */
+union mio_emm_int_ena_w1s {
+ u64 u;
+ struct mio_emm_int_ena_w1s_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_ena_w1s_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_ena_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_ENA_W1S(void)
+{
+ return 0x20b0;
+}
+
+/**
+ * Register (RSL) mio_emm_int_w1s
+ *
+ * eMMC Interrupt Set Register This register sets interrupt bits.
+ */
+union mio_emm_int_w1s {
+ u64 u;
+ struct mio_emm_int_w1s_s {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 ncb_flt : 1;
+ u64 ncb_ras : 1;
+ u64 reserved_9_63 : 55;
+ } s;
+ struct mio_emm_int_w1s_cn8 {
+ u64 buf_done : 1;
+ u64 cmd_done : 1;
+ u64 dma_done : 1;
+ u64 cmd_err : 1;
+ u64 dma_err : 1;
+ u64 switch_done : 1;
+ u64 switch_err : 1;
+ u64 reserved_7_63 : 57;
+ } cn8;
+ /* struct mio_emm_int_w1s_s cn9; */
+};
+
+static inline u64 MIO_EMM_INT_W1S(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_INT_W1S(void)
+{
+ return 0x2080;
+}
+
+/**
+ * Register (RSL) mio_emm_io_ctl
+ *
+ * eMMC I/O Control Register
+ */
+union mio_emm_io_ctl {
+ u64 u;
+ struct mio_emm_io_ctl_s {
+ u64 slew : 1;
+ u64 reserved_1 : 1;
+ u64 drive : 2;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct mio_emm_io_ctl_s cn; */
+};
+
+static inline u64 MIO_EMM_IO_CTL(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_IO_CTL(void)
+{
+ return 0x2040;
+}
+
+/**
+ * Register (RSL) mio_emm_mode#
+ *
+ * eMMC Operating Mode Register
+ */
+union mio_emm_modex {
+ u64 u;
+ struct mio_emm_modex_s {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 clk_swap : 1;
+ u64 reserved_37_39 : 3;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_63 : 13;
+ } s;
+ struct mio_emm_modex_cn8 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ struct mio_emm_modex_cn96xxp1 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_63 : 13;
+ } cn96xxp1;
+ /* struct mio_emm_modex_s cn96xxp3; */
+ /* struct mio_emm_modex_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_MODEX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MODEX(u64 a)
+{
+ return 0x2008 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_pba#
+ *
+ * eMMC MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table; the bit number is indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_pbax {
+ u64 u;
+ struct mio_emm_msix_pbax_s {
+ u64 pend : 64;
+ } s;
+ /* struct mio_emm_msix_pbax_s cn; */
+};
+
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_PBAX(u64 a)
+{
+ return 0xf0000 + 8 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_addr
+ *
+ * eMMC MSI-X Vector-Table Address Register This register is the MSI-X
+ * vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_addr {
+ u64 u;
+ struct mio_emm_msix_vecx_addr_s {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 51;
+ u64 reserved_53_63 : 11;
+ } s;
+ struct mio_emm_msix_vecx_addr_cn8 {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 47;
+ u64 reserved_49_63 : 15;
+ } cn8;
+ /* struct mio_emm_msix_vecx_addr_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_ADDR(u64 a)
+{
+ return 0 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_msix_vec#_ctl
+ *
+ * eMMC MSI-X Vector-Table Control and Data Register This register is the
+ * MSI-X vector table, indexed by the MIO_EMM_INT_VEC_E enumeration.
+ */
+union mio_emm_msix_vecx_ctl {
+ u64 u;
+ struct mio_emm_msix_vecx_ctl_s {
+ u64 data : 32;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ struct mio_emm_msix_vecx_ctl_cn8 {
+ u64 data : 20;
+ u64 reserved_20_31 : 12;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } cn8;
+ /* struct mio_emm_msix_vecx_ctl_s cn9; */
+};
+
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_MSIX_VECX_CTL(u64 a)
+{
+ return 8 + 0x10 * a;
+}
+
+/**
+ * Register (RSL) mio_emm_rca
+ *
+ * eMMC Relative Card Address Register
+ */
+union mio_emm_rca {
+ u64 u;
+ struct mio_emm_rca_s {
+ u64 card_rca : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct mio_emm_rca_s cn; */
+};
+
+static inline u64 MIO_EMM_RCA(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RCA(void)
+{
+ return 0x20a0;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_hi
+ *
+ * eMMC Response Data High Register
+ */
+union mio_emm_rsp_hi {
+ u64 u;
+ struct mio_emm_rsp_hi_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_rsp_hi_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_HI(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_HI(void)
+{
+ return 0x2070;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_lo
+ *
+ * eMMC Response Data Low Register
+ */
+union mio_emm_rsp_lo {
+ u64 u;
+ struct mio_emm_rsp_lo_s {
+ u64 dat : 64;
+ } s;
+ /* struct mio_emm_rsp_lo_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_LO(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_LO(void)
+{
+ return 0x2068;
+}
+
+/**
+ * Register (RSL) mio_emm_rsp_sts
+ *
+ * eMMC Response Status Register
+ */
+union mio_emm_rsp_sts {
+ u64 u;
+ struct mio_emm_rsp_sts_s {
+ u64 cmd_done : 1;
+ u64 cmd_idx : 6;
+ u64 cmd_type : 2;
+ u64 rsp_type : 3;
+ u64 rsp_val : 1;
+ u64 rsp_bad_sts : 1;
+ u64 rsp_crc_err : 1;
+ u64 rsp_timeout : 1;
+ u64 stp_val : 1;
+ u64 stp_bad_sts : 1;
+ u64 stp_crc_err : 1;
+ u64 stp_timeout : 1;
+ u64 rsp_busybit : 1;
+ u64 blk_crc_err : 1;
+ u64 blk_timeout : 1;
+ u64 dbuf : 1;
+ u64 reserved_24_27 : 4;
+ u64 dbuf_err : 1;
+ u64 reserved_29_54 : 26;
+ u64 acc_timeout : 1;
+ u64 dma_pend : 1;
+ u64 dma_val : 1;
+ u64 switch_val : 1;
+ u64 cmd_val : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } s;
+ /* struct mio_emm_rsp_sts_s cn; */
+};
+
+static inline u64 MIO_EMM_RSP_STS(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_RSP_STS(void)
+{
+ return 0x2060;
+}
+
+/**
+ * Register (RSL) mio_emm_sample
+ *
+ * eMMC Sampling Register
+ */
+union mio_emm_sample {
+ u64 u;
+ struct mio_emm_sample_s {
+ u64 dat_cnt : 10;
+ u64 reserved_10_15 : 6;
+ u64 cmd_cnt : 10;
+ u64 reserved_26_63 : 38;
+ } s;
+ /* struct mio_emm_sample_s cn; */
+};
+
+static inline u64 MIO_EMM_SAMPLE(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SAMPLE(void)
+{
+ return 0x2090;
+}
+
+/**
+ * Register (RSL) mio_emm_sts_mask
+ *
+ * eMMC Status Mask Register
+ */
+union mio_emm_sts_mask {
+ u64 u;
+ struct mio_emm_sts_mask_s {
+ u64 sts_msk : 32;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct mio_emm_sts_mask_s cn; */
+};
+
+static inline u64 MIO_EMM_STS_MASK(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_STS_MASK(void)
+{
+ return 0x2098;
+}
+
+/**
+ * Register (RSL) mio_emm_switch
+ *
+ * eMMC Operating Mode Switch Register This register allows software to
+ * change eMMC related parameters associated with a specific BUS_ID. The
+ * MIO_EMM_MODE() registers contain the current setting for each BUS.
+ * This register is also used to switch the [CLK_HI] and [CLK_LO]
+ * settings associated with the common EMMC_CLK. These settings can only
+ * be changed when [BUS_ID] = 0.
+ */
+union mio_emm_switch {
+ u64 u;
+ struct mio_emm_switch_s {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 clk_swap : 1;
+ u64 reserved_37_39 : 3;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_55 : 5;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } s;
+ struct mio_emm_switch_cn8 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 reserved_49_55 : 7;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } cn8;
+ struct mio_emm_switch_cn96xxp1 {
+ u64 clk_lo : 16;
+ u64 clk_hi : 16;
+ u64 power_class : 4;
+ u64 reserved_36_39 : 4;
+ u64 bus_width : 3;
+ u64 reserved_43_47 : 5;
+ u64 hs_timing : 1;
+ u64 hs200_timing : 1;
+ u64 hs400_timing : 1;
+ u64 reserved_51_55 : 5;
+ u64 switch_err2 : 1;
+ u64 switch_err1 : 1;
+ u64 switch_err0 : 1;
+ u64 switch_exe : 1;
+ u64 bus_id : 2;
+ u64 reserved_62_63 : 2;
+ } cn96xxp1;
+ /* struct mio_emm_switch_s cn96xxp3; */
+ /* struct mio_emm_switch_s cnf95xx; */
+};
+
+static inline u64 MIO_EMM_SWITCH(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_SWITCH(void)
+{
+ return 0x2048;
+}
+
+/**
+ * Register (RSL) mio_emm_tap
+ *
+ * eMMC TAP Delay Register This register indicates the delay line
+ * characteristics.
+ */
+union mio_emm_tap {
+ u64 u;
+ struct mio_emm_tap_s {
+ u64 delay : 8;
+ u64 reserved_8_63 : 56;
+ } s;
+ /* struct mio_emm_tap_s cn; */
+};
+
+static inline u64 MIO_EMM_TAP(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TAP(void)
+{
+ return 0x20c8;
+}
+
+/**
+ * Register (RSL) mio_emm_timing
+ *
+ * eMMC Timing Register This register determines the number of tap delays
+ * the EMM_DAT, EMM_DS, and EMM_CMD lines are transmitted or received in
+ * relation to EMM_CLK. These values should only be changed when the eMMC
+ * bus is idle.
+ */
+union mio_emm_timing {
+ u64 u;
+ struct mio_emm_timing_s {
+ u64 data_out_tap : 6;
+ u64 reserved_6_15 : 10;
+ u64 data_in_tap : 6;
+ u64 reserved_22_31 : 10;
+ u64 cmd_out_tap : 6;
+ u64 reserved_38_47 : 10;
+ u64 cmd_in_tap : 6;
+ u64 reserved_54_63 : 10;
+ } s;
+ /* struct mio_emm_timing_s cn; */
+};
+
+static inline u64 MIO_EMM_TIMING(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_TIMING(void)
+{
+ return 0x20d0;
+}
+
+/**
+ * Register (RSL) mio_emm_wdog
+ *
+ * eMMC Watchdog Register
+ */
+union mio_emm_wdog {
+ u64 u;
+ struct mio_emm_wdog_s {
+ u64 clk_cnt : 26;
+ u64 reserved_26_63 : 38;
+ } s;
+ /* struct mio_emm_wdog_s cn; */
+};
+
+static inline u64 MIO_EMM_WDOG(void)
+ __attribute__ ((pure, always_inline));
+static inline u64 MIO_EMM_WDOG(void)
+{
+ return 0x2088;
+}
+
+#endif /* __CSRS_MIO_EMM_H__ */
diff --git a/arch/arm/include/asm/arch-octeontx/csrs/csrs-xcv.h b/arch/arm/include/asm/arch-octeontx/csrs/csrs-xcv.h
new file mode 100644
index 0000000000..575f6dce82
--- /dev/null
+++ b/arch/arm/include/asm/arch-octeontx/csrs/csrs-xcv.h
@@ -0,0 +1,428 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+#ifndef __CSRS_XCV_H__
+#define __CSRS_XCV_H__
+
+/**
+ * @file
+ *
+ * Configuration and status register (CSR) address and type definitions for
+ * XCV.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ */
+
+/**
+ * Enumeration xcv_bar_e
+ *
+ * XCV Base Address Register Enumeration Enumerates the base address
+ * registers.
+ */
+#define XCV_BAR_E_XCVX_PF_BAR0(a) (0x87e0db000000ll + 0ll * (a))
+#define XCV_BAR_E_XCVX_PF_BAR0_SIZE 0x100000ull
+#define XCV_BAR_E_XCVX_PF_BAR4(a) (0x87e0dbf00000ll + 0ll * (a))
+#define XCV_BAR_E_XCVX_PF_BAR4_SIZE 0x100000ull
+
+/**
+ * Enumeration xcv_int_vec_e
+ *
+ * XCV MSI-X Vector Enumeration Enumerates the MSI-X interrupt vectors.
+ */
+#define XCV_INT_VEC_E_INT (0)
+
+/**
+ * Register (RSL) xcv#_batch_crd_ret
+ *
+ * XCV Batch Credit Return Register
+ */
+union xcvx_batch_crd_ret {
+ u64 u;
+ struct xcvx_batch_crd_ret_s {
+ u64 crd_ret : 1;
+ u64 reserved_1_63 : 63;
+ } s;
+ /* struct xcvx_batch_crd_ret_s cn; */
+};
+
+static inline u64 XCVX_BATCH_CRD_RET(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_BATCH_CRD_RET(u64 a)
+{
+ return 0x100 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_comp_ctl
+ *
+ * XCV Compensation Controller Register This register controls
+ * programmable compensation.
+ */
+union xcvx_comp_ctl {
+ u64 u;
+ struct xcvx_comp_ctl_s {
+ u64 nctl_sat : 1;
+ u64 reserved_1_26 : 26;
+ u64 nctl_lock : 1;
+ u64 reserved_28 : 1;
+ u64 pctl_sat : 1;
+ u64 pctl_lock : 1;
+ u64 reserved_31 : 1;
+ u64 drv_nctl : 5;
+ u64 reserved_37_39 : 3;
+ u64 drv_pctl : 5;
+ u64 reserved_45_47 : 3;
+ u64 cmp_nctl : 5;
+ u64 reserved_53_55 : 3;
+ u64 cmp_pctl : 5;
+ u64 reserved_61_62 : 2;
+ u64 drv_byp : 1;
+ } s;
+ /* struct xcvx_comp_ctl_s cn; */
+};
+
+static inline u64 XCVX_COMP_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_COMP_CTL(u64 a)
+{
+ return 0x20 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_ctl
+ *
+ * XCV Control Register This register contains the status control bits.
+ */
+union xcvx_ctl {
+ u64 u;
+ struct xcvx_ctl_s {
+ u64 speed : 2;
+ u64 lpbk_int : 1;
+ u64 lpbk_ext : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct xcvx_ctl_s cn; */
+};
+
+static inline u64 XCVX_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_CTL(u64 a)
+{
+ return 0x30 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_dll_ctl
+ *
+ * XCV DLL Controller Register The RGMII timing specification requires
+ * that devices transmit clock and data synchronously. The specification
+ * requires external sources (namely the PC board trace routes) to
+ * introduce the appropriate 1.5 to 2.0 ns of delay. To eliminate the
+ * need for the PC board delays, the RGMII interface has optional on-
+ * board DLLs for both transmit and receive. For correct operation, at
+ * most one of the transmitter, board, or receiver involved in an RGMII
+ * link should introduce delay. By default/reset, the RGMII receivers
+ * delay the received clock, and the RGMII transmitters do not delay the
+ * transmitted clock. Whether this default works as-is with a given link
+ * partner depends on the behavior of the link partner and the PC board.
+ * These are the possible modes of RGMII receive operation: *
+ * XCV()_DLL_CTL[CLKRX_BYP] = 0 (reset value) - The RGMII receive
+ * interface introduces clock delay using its internal DLL. This mode is
+ * appropriate if neither the remote transmitter nor the PC board delays
+ * the clock. * XCV()_DLL_CTL[CLKRX_BYP] = 1, [CLKRX_SET] = 0x0 - The
+ * RGMII receive interface introduces no clock delay. This mode is
+ * appropriate if either the remote transmitter or the PC board delays
+ * the clock. These are the possible modes of RGMII transmit operation:
+ * * XCV()_DLL_CTL[CLKTX_BYP] = 1, [CLKTX_SET] = 0x0 (reset value) - The
+ * RGMII transmit interface introduces no clock delay. This mode is
+ * appropriate is either the remote receiver or the PC board delays the
+ * clock. * XCV()_DLL_CTL[CLKTX_BYP] = 0 - The RGMII transmit interface
+ * introduces clock delay using its internal DLL. This mode is
+ * appropriate if neither the remote receiver nor the PC board delays the
+ * clock.
+ */
+union xcvx_dll_ctl {
+ u64 u;
+ struct xcvx_dll_ctl_s {
+ u64 refclk_sel : 2;
+ u64 reserved_2_7 : 6;
+ u64 clktx_set : 7;
+ u64 clktx_byp : 1;
+ u64 clkrx_set : 7;
+ u64 clkrx_byp : 1;
+ u64 clk_set : 7;
+ u64 lock : 1;
+ u64 reserved_32_63 : 32;
+ } s;
+ /* struct xcvx_dll_ctl_s cn; */
+};
+
+static inline u64 XCVX_DLL_CTL(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_DLL_CTL(u64 a)
+{
+ return 0x10 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_eco
+ *
+ * INTERNAL: XCV ECO Register
+ */
+union xcvx_eco {
+ u64 u;
+ struct xcvx_eco_s {
+ u64 eco_rw : 16;
+ u64 reserved_16_63 : 48;
+ } s;
+ /* struct xcvx_eco_s cn; */
+};
+
+static inline u64 XCVX_ECO(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_ECO(u64 a)
+{
+ return 0x200 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_inbnd_status
+ *
+ * XCV Inband Status Register This register contains RGMII inband status.
+ */
+union xcvx_inbnd_status {
+ u64 u;
+ struct xcvx_inbnd_status_s {
+ u64 link : 1;
+ u64 speed : 2;
+ u64 duplex : 1;
+ u64 reserved_4_63 : 60;
+ } s;
+ /* struct xcvx_inbnd_status_s cn; */
+};
+
+static inline u64 XCVX_INBND_STATUS(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INBND_STATUS(u64 a)
+{
+ return 0x80 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int
+ *
+ * XCV Interrupt Register This register flags error for TX FIFO overflow,
+ * TX FIFO underflow and incomplete byte for 10/100 Mode. It also flags
+ * status change for link duplex, link speed and link up/down.
+ */
+union xcvx_int {
+ u64 u;
+ struct xcvx_int_s {
+ u64 link : 1;
+ u64 speed : 1;
+ u64 reserved_2 : 1;
+ u64 duplex : 1;
+ u64 incomp_byte : 1;
+ u64 tx_undflw : 1;
+ u64 tx_ovrflw : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct xcvx_int_s cn; */
+};
+
+static inline u64 XCVX_INT(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT(u64 a)
+{
+ return 0x40 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_ena_w1c
+ *
+ * Loopback Error Interrupt Enable Clear Register This register clears
+ * interrupt enable bits.
+ */
+union xcvx_int_ena_w1c {
+ u64 u;
+ struct xcvx_int_ena_w1c_s {
+ u64 link : 1;
+ u64 speed : 1;
+ u64 reserved_2 : 1;
+ u64 duplex : 1;
+ u64 incomp_byte : 1;
+ u64 tx_undflw : 1;
+ u64 tx_ovrflw : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct xcvx_int_ena_w1c_s cn; */
+};
+
+static inline u64 XCVX_INT_ENA_W1C(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_ENA_W1C(u64 a)
+{
+ return 0x50 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_ena_w1s
+ *
+ * Loopback Error Interrupt Enable Set Register This register sets
+ * interrupt enable bits.
+ */
+union xcvx_int_ena_w1s {
+ u64 u;
+ struct xcvx_int_ena_w1s_s {
+ u64 link : 1;
+ u64 speed : 1;
+ u64 reserved_2 : 1;
+ u64 duplex : 1;
+ u64 incomp_byte : 1;
+ u64 tx_undflw : 1;
+ u64 tx_ovrflw : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct xcvx_int_ena_w1s_s cn; */
+};
+
+static inline u64 XCVX_INT_ENA_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_ENA_W1S(u64 a)
+{
+ return 0x58 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_int_w1s
+ *
+ * Loopback Error Interrupt Set Register This register sets interrupt
+ * bits.
+ */
+union xcvx_int_w1s {
+ u64 u;
+ struct xcvx_int_w1s_s {
+ u64 link : 1;
+ u64 speed : 1;
+ u64 reserved_2 : 1;
+ u64 duplex : 1;
+ u64 incomp_byte : 1;
+ u64 tx_undflw : 1;
+ u64 tx_ovrflw : 1;
+ u64 reserved_7_63 : 57;
+ } s;
+ /* struct xcvx_int_w1s_s cn; */
+};
+
+static inline u64 XCVX_INT_W1S(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_INT_W1S(u64 a)
+{
+ return 0x48 + 0 * a;
+}
+
+/**
+ * Register (RSL) xcv#_msix_pba#
+ *
+ * XCV MSI-X Pending Bit Array Registers This register is the MSI-X PBA
+ * table; the bit number is indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_pbax {
+ u64 u;
+ struct xcvx_msix_pbax_s {
+ u64 pend : 64;
+ } s;
+ /* struct xcvx_msix_pbax_s cn; */
+};
+
+static inline u64 XCVX_MSIX_PBAX(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_PBAX(u64 a, u64 b)
+{
+ return 0xf0000 + 0 * a + 8 * b;
+}
+
+/**
+ * Register (RSL) xcv#_msix_vec#_addr
+ *
+ * XCV MSI-X Vector-Table Address Register This register is the MSI-X
+ * vector table, indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_vecx_addr {
+ u64 u;
+ struct xcvx_msix_vecx_addr_s {
+ u64 secvec : 1;
+ u64 reserved_1 : 1;
+ u64 addr : 47;
+ u64 reserved_49_63 : 15;
+ } s;
+ /* struct xcvx_msix_vecx_addr_s cn; */
+};
+
+static inline u64 XCVX_MSIX_VECX_ADDR(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_VECX_ADDR(u64 a, u64 b)
+{
+ return 0 + 0 * a + 0x10 * b;
+}
+
+/**
+ * Register (RSL) xcv#_msix_vec#_ctl
+ *
+ * XCV MSI-X Vector-Table Control and Data Register This register is the
+ * MSI-X vector table, indexed by the XCV_INT_VEC_E enumeration.
+ */
+union xcvx_msix_vecx_ctl {
+ u64 u;
+ struct xcvx_msix_vecx_ctl_s {
+ u64 data : 20;
+ u64 reserved_20_31 : 12;
+ u64 mask : 1;
+ u64 reserved_33_63 : 31;
+ } s;
+ /* struct xcvx_msix_vecx_ctl_s cn; */
+};
+
+static inline u64 XCVX_MSIX_VECX_CTL(u64 a, u64 b)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_MSIX_VECX_CTL(u64 a, u64 b)
+{
+ return 8 + 0 * a + 0x10 * b;
+}
+
+/**
+ * Register (RSL) xcv#_reset
+ *
+ * XCV Reset Registers This register controls reset.
+ */
+union xcvx_reset {
+ u64 u;
+ struct xcvx_reset_s {
+ u64 rx_dat_rst_n : 1;
+ u64 rx_pkt_rst_n : 1;
+ u64 tx_dat_rst_n : 1;
+ u64 tx_pkt_rst_n : 1;
+ u64 reserved_4_6 : 3;
+ u64 comp : 1;
+ u64 reserved_8_10 : 3;
+ u64 dllrst : 1;
+ u64 reserved_12_14 : 3;
+ u64 clkrst : 1;
+ u64 reserved_16_62 : 47;
+ u64 enable : 1;
+ } s;
+ /* struct xcvx_reset_s cn; */
+};
+
+static inline u64 XCVX_RESET(u64 a)
+ __attribute__ ((pure, always_inline));
+static inline u64 XCVX_RESET(u64 a)
+{
+ return 0 + 0 * a;
+}
+
+#endif /* __CSRS_XCV_H__ */
diff --git a/arch/arm/include/asm/arch-octeontx/gpio.h b/arch/arm/include/asm/arch-octeontx/gpio.h
new file mode 100644
index 0000000000..3943ffd952
--- /dev/null
+++ b/arch/arm/include/asm/arch-octeontx/gpio.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
diff --git a/arch/arm/include/asm/arch-octeontx/smc.h b/arch/arm/include/asm/arch-octeontx/smc.h
new file mode 100644
index 0000000000..beff4d158f
--- /dev/null
+++ b/arch/arm/include/asm/arch-octeontx/smc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SMC_H__
+#define __SMC_H__
+
+/* OcteonTX Service Calls version numbers */
+#define OCTEONTX_VERSION_MAJOR 0x1
+#define OCTEONTX_VERSION_MINOR 0x0
+
+/* x1 - node number */
+#define OCTEONTX_DRAM_SIZE 0xc2000301
+
+ssize_t smc_dram_size(unsigned int node);
+
+#endif /* __SMC_H__ */
diff --git a/arch/arm/include/asm/arch-octeontx/soc.h b/arch/arm/include/asm/arch-octeontx/soc.h
new file mode 100644
index 0000000000..c16244020c
--- /dev/null
+++ b/arch/arm/include/asm/arch-octeontx/soc.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __SOC_H__
+#define __SOC_H__
+
+/* Product PARTNUM */
+#define CN81XX 0xA2
+#define CN83XX 0xA3
+
+#define otx_is_altpkg() read_alt_pkg()
+#define otx_is_soc(soc) (read_partnum() == (soc))
+#define otx_is_board(model) (!strcmp(read_board_name(), model))
+#define otx_is_platform(platform) (read_platform() == (platform))
+
+enum platform {
+ PLATFORM_HW = 0,
+ PLATFORM_EMULATOR = 1,
+ PLATFORM_ASIM = 3,
+};
+
+int read_platform(void);
+u8 read_partnum(void);
+const char *read_board_name(void);
+bool read_alt_pkg(void);
+
+#endif /* __SOC_H */
--
2.23.0
More information about the U-Boot
mailing list