[U-Boot] [PATCH v2 2/6] mx7ulp: Introduce the CONFIG_LDO_ENABLED_MODE option

[Fabio Estevam]

Introduce the CONFIG_LDO_ENABLED_MODE option so that i.MX7ULP boards
designed to operate with LDO enabled mode can work with 0.95V at LDO
output in RUN mode as per the datasheet.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
Changes since v1:
- None

 arch/arm/mach-imx/mx7ulp/Kconfig |  5 +++
 arch/arm/mach-imx/mx7ulp/soc.c   | 58 ++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)

diff --git a/arch/arm/mach-imx/mx7ulp/Kconfig b/arch/arm/mach-imx/mx7ulp/Kconfig
index ed5f0aeb2d..138c58363f 100644
--- a/arch/arm/mach-imx/mx7ulp/Kconfig
+++ b/arch/arm/mach-imx/mx7ulp/Kconfig
@@ -3,6 +3,11 @@ if ARCH_MX7ULP
 config SYS_SOC
 	default "mx7ulp"
 
+config LDO_ENABLED_MODE
+	bool "i.MX7ULP LDO Enabled Mode"
+	help
+	  Select this option to enable the PMC1 LDO.
+
 config MX7ULP
 	bool
 
diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c
index b9a108a514..751575c95e 100644
--- a/arch/arm/mach-imx/mx7ulp/soc.c
+++ b/arch/arm/mach-imx/mx7ulp/soc.c
@@ -9,6 +9,22 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/hab.h>
 
+#define PMC0_BASE_ADDR		0x410a1000
+#define PMC0_CTRL		0x28
+#define PMC0_CTRL_LDOEN		BIT(31)
+#define PMC0_CTRL_LDOOKDIS	BIT(30)
+#define PMC0_CTRL_PMC1ON	BIT(24)
+#define PMC1_BASE_ADDR		0x40400000
+#define PMC1_RUN		0x8
+#define PMC1_STOP		0x10
+#define PMC1_VLPS		0x14
+#define PMC1_RUN_LDOVL_SHIFT	16
+#define PMC1_RUN_LDOVL_MASK	(0x3f << PMC1_RUN_LDOVL_SHIFT)
+#define PMC1_RUN_LDOVL_900	0x1e
+#define PMC1_RUN_LDOVL_950	0x23
+#define PMC1_STATUS		0x20
+#define PMC1_STATUS_LDOVLF	BIT(8)
+
 static char *get_reset_cause(char *);
 
 #if defined(CONFIG_IMX_HAB)
@@ -100,6 +116,44 @@ void init_wdog(void)
 	disable_wdog(WDG2_RBASE);
 }
 
+#if defined(CONFIG_LDO_ENABLED_MODE)
+static void init_ldo_mode(void)
+{
+	unsigned int reg;
+
+	/* Set LDOOKDIS */
+	setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOOKDIS);
+
+	/* Set LDOVL to 0.95V in PMC1_RUN */
+	reg = readl(PMC1_BASE_ADDR + PMC1_RUN);
+	reg &= ~PMC1_RUN_LDOVL_MASK;
+	reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT);
+	writel(PMC1_BASE_ADDR + PMC1_RUN, reg);
+
+	/* Wait for LDOVLF to be cleared */
+	reg = readl(PMC1_BASE_ADDR + PMC1_STATUS);
+	while (reg & PMC1_STATUS_LDOVLF)
+		;
+
+	/* Set LDOVL to 0.95V in PMC1_STOP */
+	reg = readl(PMC1_BASE_ADDR + PMC1_STOP);
+	reg &= ~PMC1_RUN_LDOVL_MASK;
+	reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT);
+	writel(PMC1_BASE_ADDR + PMC1_STOP, reg);
+
+	/* Set LDOVL to 0.90V in PMC1_VLPS */
+	reg = readl(PMC1_BASE_ADDR + PMC1_VLPS);
+	reg &= ~PMC1_RUN_LDOVL_MASK;
+	reg |= (PMC1_RUN_LDOVL_900 << PMC1_RUN_LDOVL_SHIFT);
+	writel(PMC1_BASE_ADDR + PMC1_VLPS, reg);
+
+	/* Set LDOEN bit */
+	setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOEN);
+
+	/* Set the PMC1ON bit */
+	setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_PMC1ON);
+}
+#endif
 
 void s_init(void)
 {
@@ -113,6 +167,10 @@ void s_init(void)
 		/* enable dumb pmic */
 		writel((readl(SNVS_LP_LPCR) | SNVS_LPCR_DPEN), SNVS_LP_LPCR);
 	}
+
+#if defined(CONFIG_LDO_ENABLED_MODE)
+	init_ldo_mode();
+#endif
 	return;
 }
 
-- 
2.17.1