[U-Boot] [PATCH 2/2] ARM: dts: imx6qdl: Add U-Boot specific device tree files for Cubox-i
walter.lozano at collabora.com
Wed Oct 30 19:58:17 UTC 2019
On 30/10/19 15:43, Fabio Estevam wrote:
> Hi Walter,
> On Wed, Oct 30, 2019 at 11:22 AM Walter Lozano
> <walter.lozano at collabora.com> wrote:
>> Thanks for your comments. My intention was to initially send the device tree patches and in a different patchset update the configuration, as it requires to run different tests (i.e. boot from SATA). Also I felt that this patch has meaning by itself, as it could be useful for people willing to test DM on this board.
> It is preferred that you resend the dts pieces only when the cubox
> board is really converted to DM, otherwise you are only adding "dead
Thanks for the suggestion. I will wait for some SATA tests before re
sending these patches.
> Also the imx6dl-cubox-i-u-boot.dtb does not need to be explicitly
> added in the Makefile.
> It gets built automatically by the core U-Boot Makefile logic.
Thanks for the information. I was confused by entries like
"r8a7790-lager-u-boot.dtb" in the Makefile but you are right. I will
take this into account for v2.
More information about the U-Boot